I Love it!!!! Your Awesome 👏!!!! Thanks for the Great 👍 information
@tedsmarinerepair8956
3 жыл бұрын
Always glad to help!! Enjoy!
@kaveriifoodbasketkaveriifo3559
3 жыл бұрын
Always MY Best
@raymondparks8424
3 жыл бұрын
Thank you for the reply. I have a 6 month old boat and the tranmission oil has a lot of water in it. Warranty repair but still a big deal.
@tedsmarinerepair8956
3 жыл бұрын
Yes Unfortunate, but good its under warranty.👍
@user-kb7cc9kw2k
6 ай бұрын
Hi Were could i find a workshop manual for my IPS B
@gv3490
3 жыл бұрын
Hi Ted, We have enjoyed your videos and they have helped us and friends of us tremendously. We just sold our Navigator boat and are looking at buying a Regal with Volvo Penta IPS. My question is, most of the boats we look at have rusty bolts all around on top of the large clamping ring on the IPS. I was wondering if you find that a concern. Thanks again.
@tedsmarinerepair8956
3 жыл бұрын
The bolts are steel so they will corrode. As long as there is not severe corrosion (major flaking rust on the bolt heads, I find this is normal. Unfortunately in many applications this is an area that is overlooked for a "corrosion spray" treatment that should be applied periodically.
@raymondparks8424
3 жыл бұрын
Very good video. What is the most likely cause of water in the transmission oil?
@tedsmarinerepair8956
3 жыл бұрын
There are various reasons, sometimes fishing line on the prop shafts, or very silty or sandy water can tear up seals. I can't point to one particular cause due there are many. These units have a robust design like their outdrives.
@ElvioVieiraJardim
2 ай бұрын
Hello Ted ,Like very much your Chanel. I work on an Azimut 77s with 3 IPS 1200. One of them after driving 2 /3 hours when docking losses transmission pressure and goes to safe mode. Been cleaning the filter wich there some black moisture grease . Then goes to normal again. But when sailing 2/3 hours there always something on the filter. We had 3 new gear boxes +\- 300 hours ago. Oils changed but seals check. Would you know ? Thank you
@tedsmarinerepair8956
2 ай бұрын
Do you need to keep adding oil to the drive? Not sure what "black Moisture grease" means. Does the lube smell burnt? Is it back in color or milky white?
@ElvioVieiraJardim
2 ай бұрын
@@tedsmarinerepair8956 thank you my friend for answering . I only add oil because when open the filter there always a bit coming out. I could send a video or photo by mail or what’s up. If it is ok with you🙏
@tedsmarinerepair8956
2 ай бұрын
@@ElvioVieiraJardim yes please do. My email is marinedoc01@yahoo.com
@ElvioVieiraJardim
2 ай бұрын
@@tedsmarinerepair8956 ok Ted thank you my friend💪 I m currently bringing back the boat to Portugal 🇵🇹 from a two weeks trip around Spain . There just a a few people to talk to about IPS systems . Been having some problems since I’m with him . Seen your vids and you are 👌👌👌👌
@handayanitira2809
Жыл бұрын
Dimana saya bisa beli ..?
@wilkinsonyachtbrokerUK
3 жыл бұрын
the electric motor that vectors the pod through gear reduction is interesting. i thought it wouldve been hydraulic. surely the motor would draw a lot of power
@tedsmarinerepair8956
3 жыл бұрын
Good question! Actually it is a frequency driven motor which spins a pair of planetary gear sets that have a high mechanical reduction gear ratio. So its really a small industrial motor which consumes far less energy than you would think.
@ericrutledge4631
3 жыл бұрын
Lots of great information. A little off topic, but with a forward facing propeller system, it seems they would easier to foul? Can a rope cutter be installed between the two props or some other solution? Thanks
@tedsmarinerepair8956
3 жыл бұрын
That is a good question. As far as I know all smaller VP fwd drives ( non commercial) do not have a line cutter option.
@dankraemer5359
3 жыл бұрын
@@tedsmarinerepair8956 Line cutters for the IPS 1 part # 21686492 and I can help you with that.
@tedsmarinerepair8956
3 жыл бұрын
@@dankraemer5359 Thank you for the information!!
@kirkwilliams4942
11 ай бұрын
They all have cuters between the two props.
@kirkwilliams4942
11 ай бұрын
What protects the probs from hitting something in the water? They are really exposed.
@tedsmarinerepair8956
11 ай бұрын
The operator running the boat.
@stemtosternms4438
3 жыл бұрын
Lots of great info on your channel. I’m a surveyor trying to learn more details about the IPS drives. Had one today with moderate amount of moisture in the fluid. Is there a common place for mixture? Thanks
@tedsmarinerepair8956
3 жыл бұрын
Moderate is a relative term. Any water is never a good thing. I can't state a common point of water intrusion without inspection (misleading info is never good). I would suggest the owner have a VP dealer determine the water intrusion location and have it repaired.
@stemtosternms4438
3 жыл бұрын
@@tedsmarinerepair8956 Thanks for reply! Yes definitely will get a service and diagnosis before next use.
@user-vu2qf2cy1c
3 ай бұрын
Hi
@lucaiacastro2753
3 жыл бұрын
Very interesting videos! Thank you for posting!! I was looking for the possible cause I found my IPS leaked out all the oil but I cannot see from there. 2 pictures attached here ibb.co/VtV2Nxm ibb.co/JF6NJ1y Any suggestion?? Thank you
@lucaiacastro2753
3 жыл бұрын
No answer???
@charlie2king
3 жыл бұрын
Just bolt a tesla motor up to that n boom electric pod drive
Пікірлер: 33