Just followed your video. Clear concise and easy to watch while doing the brakes. Good job 👍
@IAMASPANNER
3 ай бұрын
Thank you for the feedback, glad to help 👍
@ricwhite3410
Жыл бұрын
Awesome vid mate, really informative and well put together. 👍
@shaneskistyle30
6 ай бұрын
Awesome video. Very detailed aling the way. Great job and thanks for the help 👍🏽
@IAMASPANNER
6 ай бұрын
Very glad to help and thank you for taking the time to leave a comment! 👍
@kranu12345678
Жыл бұрын
amazing account, thanks guys for your effort!
@pg41226
Жыл бұрын
Thanks for the great video :) I’ll do this job coming spring, I chose for an ATE set, let’s see how they behave! Just a little note for other Volvo enthusiasts, Volvo Vida tells not to put any grease on the slider pins… I don’t think you did it wrong, just saying 😊
@squadmeta
Жыл бұрын
Also avoid using copper grease on pads, use specific brake paste. Copper grease transfers heat from the pad to the caliper and can make the fluid hotter than it needs to be. Reason Volvo (or almost all slider pins) are grease free or a very light smear of lithium grease is to avoid the grease hydrolocking and stopping the pin moving its full travel. If the pins are worn in any way just replace them.
@deltalimited7353
Жыл бұрын
Thanks a lot . This video is veri useful.
@clewis5220
9 ай бұрын
Nice video, I use a rubber puck in the cup of the trolley jack, protects the jacking point imo
@anitacox7597
Жыл бұрын
Thank you
@IAMASPANNER
11 ай бұрын
Glad to help!
@sheffcitys2forgedinsteel255
7 ай бұрын
Hi great video mate, just what I've been looking for so cheers 🍻, Do you know what brand of discs and pads they come with from factory? And how are the Brembo doing after time?
@IAMASPANNER
6 ай бұрын
I don’t know who make Volvo original parts but some sources suggest Brembo or Bosch. The Brembo parts have lasted great, most notably the centres haven’t gone rusty like they have done when I’ve used other parts like Delphi or MTEC.
@sheffcitys2forgedinsteel255
6 ай бұрын
@@IAMASPANNER cheers
@ziadbakkich7233
Жыл бұрын
Last week i ordered and mounted the same brembo brake pads and discs as you on my Volvo v40. After installation i hear some squeecking from te front on braking. Is this normal after installation? Did you also have the same noise? Thanks!
@IAMASPANNER
Жыл бұрын
Did you coat all mating surfaces with copper grease?
@ziadbakkich7233
Жыл бұрын
@@IAMASPANNER yes is did, the only thing i noticed after a 100 miles is that the brake discs look lightly scratched by the brake pads. The back doesnt have this scratches kn the discs and is also not making this noise.
@abadi430
Ай бұрын
is it the same procedure in v40 t3 2019?
@chileung2609
2 ай бұрын
Hi, I like to fit a set of Brembo disc & pad set to my v40, can you let me know where to buy from please?🙏 many thanks!
@IAMASPANNER
Ай бұрын
I used GSF but there are many options where to buy online.
@rimamura21
Жыл бұрын
what is the model of the brake discs and pad, put the model. And the rears?
@IAMASPANNER
Жыл бұрын
I don’t have the part numbers but they’re Brembos from the local autofactors, GSF.
@mossbrookbaconboys
10 ай бұрын
Great video. Thanks
@costindan6180
7 ай бұрын
Copper paste and wire brush? Really? Otherwise thanks, nice video :)
@IAMASPANNER
6 ай бұрын
Been seeing a lot of hate for copper grease this year yet never before, what’s changed? I’ve now got ceramic grease but even that is only supposed to be for the pads? What’s up with the wire brush as well?
@yeivi1000
10 ай бұрын
Is like a Ford focus
@IAMASPANNER
9 ай бұрын
Yes, the car was designed while Ford owned Volvo so lots of things were similar.
@petit4695
9 ай бұрын
i was impressed until you got the copperpaste out. throw that shit in the garbage
Пікірлер: 29