Thank you sooo much brother for the information on how to add key on volvo XC70.
@8power0
2 жыл бұрын
GREAT WORK,,, THANKS FOR YOUR TIME!!!!!!!!!!!!!!!!
@schluesseldienst_muzler_de4067
2 жыл бұрын
Nice work. Good Video
@adamsny6605
2 жыл бұрын
Good movie, best regards, Adam
@undo7777
2 жыл бұрын
good job
@erwan7
Ай бұрын
Great video. Quick question- can i read immo from cem using only im608 through obd or i need xp400 pro also?
@TimHaunFishing
Жыл бұрын
Very well done my friend. Where did you end up sourcing the key? Key Innovations doesn't seem to have them.
@user-cr8ot4iw2k
4 ай бұрын
Can the CEM module be replaced in similar process with this equipment?
@josuedavidnataren4255
8 күн бұрын
Can a used key be cleared/renew and program to volvos? Thanks
@motosystemltd
Жыл бұрын
Good job, yes this one is easy, but some xc90 after 2005 for add the key by Obd need remove 2 chips from CEM, some types have encrypted bytes and 1 chip from mirror :) I just copied the transponder, for emergency key, If customer willing to pay me more for the job than main dealer ordering the key (about £200) why not. Obviously for AKL no problem.. Please have a look on some xc90 models.... Take care :)
@firebirder
4 ай бұрын
Good video. You noted it takes very long time to find out the data via OBD. (How long is that?) So you took the way by removing CEM and soldering.
@100pyatt
8 ай бұрын
Does this work on P3 Volvo 2016 ?
@seanwalsh3364
2 жыл бұрын
did remote work or do you need other tool
@huyug1
2 жыл бұрын
Yes everything worked the way it supposed to
@Peter-hw1yx
11 ай бұрын
how much do you charge?
@lonetraveler5660
2 жыл бұрын
Great video. I have one key. If I just add a semi key, do I still need soldering? Thank you
@huyug1
2 жыл бұрын
Yes I believe you still would have to remove and solder
@Peter-hc4di
2 жыл бұрын
You can add a key thru obd but that Will take forever. Thru obd I do them overnight!
@huyug1
2 жыл бұрын
@@Peter-hc4di yes I think I mentioned it in the video. Like you said it will take overnight to calculate the eeprom data through obd.
@Peter-hc4di
2 жыл бұрын
@@huyug1 Yes Huseyin you did! I was only replying to The question above! Thank you for The upload! Best wishes from Sweden!
@aleksandarpopovic7090
2 жыл бұрын
We need you in Ottawa- Canada almost nobody knows how to do it or they charge like 400$ like come on it should not be so expensive. Good job I do have one key and want to program the other one. If i get the one from e bay that has a chip could that key be programmed??? Thanks
@huyug1
2 жыл бұрын
Thanks a lot! Yes as long as it is a new key you should now have problems.
@zymon.
2 жыл бұрын
$400 is a pretty good price, imo, especially Canadian $
@citylockapolytechnikeyllcc7936
2 жыл бұрын
400.00 is too much? How much in the Volvo DIY forum was it ? Geeez..... but you will likely get a price break on doing two at the same time, and most will not touch used parts from Ebay. Your mileage may vary
@joesmith2436
2 жыл бұрын
Have im508 with xp400pro would it do ignition key switch programming and do I need new keys via obd?
@joesmith2436
2 жыл бұрын
For the same 2008 xc70
@matejbruna2663
Жыл бұрын
You can solve All-Key-Lost on XC70 (2008) with IM508+XP400 Pro via OBD. It works, but you must be patient, it will take about 8 hours. I recommend external power source for battery. After decrypting you are able to learn new keys. I made it yesterday.
@doron2500
Жыл бұрын
@@matejbruna2663 did you left the programer in the car connected to OBD for 8 hours?
@user-qg8mm7wj5v
2 жыл бұрын
X100pad3 сделает?
@audriuskimtys7943
2 жыл бұрын
Hi, have you ever tried to extract or decode CEM pin code?? Thanks for video!!
@huyug1
2 жыл бұрын
Hi, I have never tried it but there maybe be softwares which are able to extract it.
@Peter-hc4di
2 жыл бұрын
Hi! Do you know If im608 with xp400 pro is able to clone Volvo V60 CEM module R5F64525KPD? It can do all Keys lost for this cem type but not sure how to clone it... Thanks!
@huyug1
2 жыл бұрын
You would just transfer eeprom and flash file if available
@rh7163
Ай бұрын
This has to be the most ridiculous way to go about programming a key fob but it comes with so many options to really mess things up with a soldering gun........on a system you can guess at by looking at a circuit diagram.
Пікірлер: 36