Software can't stop thermal runaway if your SSR fails on. That's why the thermal fuse is really necessary
@T0tenkampf
Жыл бұрын
YOU KILLED KENNY!
@mysfiring
Жыл бұрын
With the GE5C mod, did you use the slim bearing holders, or the thicker ones? Because I used the slim ones, and unless I move the endstop pod over, the printer is physically unable to home. (All of this in theory, tho, as it's still being built.)
@IsiksTech
Жыл бұрын
I used the thicker ones, that was my concern too at the time but after I moved the switch to the carriage and a/b drive so it didn't matter.
@Welshbeechy
Жыл бұрын
have you or i got wrong idler wheels on gantry i have toothed and you got smooth
@Penofhell
Жыл бұрын
Toothed is spec, don't change anything-... but as these are just idlers it works also with shouldered bearings which is what some people use. Personally I think there's nothing to gain by having a "better" bearing and there's a risk of damaging/wearing the belt.
@Welshbeechy
Жыл бұрын
@@Penofhell im getting black dust on my belts think i need to do pin mod.looks like blets are in line but sometimes rub as marks not in all the belt
@IsiksTech
Жыл бұрын
I had toothed, and lost them during the gantry reassembly. I still can't find them.
@mysfiring
Жыл бұрын
15:59 - oh man, I felt that sad trombone in my *bones*. lol.
@darkslidesk8t3r
Жыл бұрын
Hey Isik, quick question - why have you ditched your original hood mod on the 2.4? I still use mine and find it very handy. Thanks!
@IsiksTech
Жыл бұрын
It worked well for me too. I did the doomcube mod for high temperature printing, and with that it wasn't necessary because doom cube has a easily reachable top electronics chamber.
@rebelangel66
Жыл бұрын
The white plastic screw terminal block you've got laying on top of the printer just gives me the willies. I hate those things with a passion. At least you've used proper ferrels but I've seen so many dangerous electrical wiring with those things that I've just come to hate them. They are so easy to screw up and create a dangerous situation. Not that you've done so here, it's actually pretty nice use of one of those things. Sorry it's a pet peeve of mine I just had to vent. Rest of the build looks equally unorthodox but pretty functional. I'm sad to see that the bed on gassprings is gone though. I allways liked that mod. Though turning the design upside down just shows that you're still the unconventional thinkerer. And for that I salute you.
@IsiksTech
Жыл бұрын
Yeah a lot of people use those screw terminals with bare stranded wires, not a great idea. I'm sad to see the hood mod gone too, but with the doomcube it really wasn't necessary, and possibly dangerous because of the higer chamber temperatures (70-75C when printing ABS, even higher with exotics). Plus, that mod isn't ideal for thick insulation like I'm using with the doom cube.
@YEETPRIME
Жыл бұрын
Don’t mount the grounding under the thermal fuse. You want the fuse as close to the bed as possible.
@IsiksTech
Жыл бұрын
With some thermal paste, it is ok. Ideally you are right but I didn't have the tools to drill and tap another half-hole so I had to use 1. I had 2 holes like that but the other one was covered by the edge-to-edge heater. So I just prioritized the grounding since there are other fuses and software safeties built-in already.
@lFiritt
Жыл бұрын
Hocam baya iyi olmus
@Welshbeechy
Жыл бұрын
bye the way loving the new vids on the voron
@MrButuz
Жыл бұрын
Man you need to get that V0 fixed up if your gonna print ABS functional parts on it - those idler pulleys etc look a bit nasty if I am honest mate! :/
@IsiksTech
Жыл бұрын
I had toothed, and lost them during the gantry reassembly. I still can't find them. Toothed is probably better but smooth works too.
@IsiksTech
Жыл бұрын
Wow I somehow misread your comment. Yeah, I know they are ugly. Working on fixing my v0. I recently swapped the controller, and a bunch of motors. I just need to test it now, I have a feeling it was the z motor.
@dury10
Жыл бұрын
Where have you been?
@IsiksTech
Жыл бұрын
I had multiple busy weeks in a row, so I couldn't release much. The nevermore max video, a micron doom cube video, and 2 voron 0 videos are in the works already so they should be released in the next few months. Plus, I started sourcing parts for a new printer too.
Пікірлер: 22