Vst shakti130-DI new powertiller//servicing karna Sikho🫵🔥
#fitnesslikun
#vstpowertiller
#farming
#viralvideo
Sure! Servicing a VST Shakti 130-DI power tiller involves several steps to ensure it runs efficiently. Here's a basic guide:
Tools and Materials Needed:
- Wrenches and screwdrivers
- Engine oil
- Grease
- Clean cloths
- Fuel filter
- Air filter
- Spark plug (if applicable)
Step-by-Step Guide:
1. **Safety First**:
- Ensure the tiller is turned off and cooled down.
- Disconnect the spark plug wire to prevent accidental starting.
2. **Oil Change**:
- Locate the oil drain plug under the engine and place a container underneath.
- Remove the drain plug and let the oil drain completely.
- Replace the drain plug and refill with the recommended engine oil up to the appropriate level.
3. **Air Filter Maintenance**:
- Locate the air filter housing and open it.
- Remove the air filter and inspect it. If it's clogged, clean it with compressed air or replace it if necessary.
- Reassemble the air filter housing.
4. **Fuel System**:
- Check the fuel filter. Replace it if it looks dirty or clogged.
- Ensure the fuel tank is clean and free of debris.
- Check fuel lines for any signs of wear or leaks and replace if necessary.
5. **Grease Moving Parts**:
- Apply grease to all moving parts such as joints and bearings.
- Check the grease levels in the gearbox and add if needed.
6. **Spark Plug (if applicable)**:
- Remove the spark plug and inspect it.
- Clean the spark plug with a wire brush or replace it if it's worn out.
- Reinstall the spark plug and reconnect the spark plug wire.
7. **Battery (if equipped)**:
- Check the battery connections for corrosion and clean if necessary.
- Ensure the battery is fully charged.
8. **Check Belts and Chains**:
- Inspect belts and chains for wear and tension.
- Adjust or replace them if necessary.
9. **Inspect and Tighten Bolts and Nuts**:
- Go over the entire machine and ensure all bolts and nuts are tight.
- Look for any signs of wear or damage to the frame or attachments.
10. **Final Check**:
- Reassemble any components you have taken apart.
- Reconnect the spark plug wire.
- Start the engine and let it run for a few minutes to ensure everything is working properly.
Tips:
- Regular servicing can prevent major issues and extend the life of your power tiller.
- Refer to the user manual for specific details and intervals for servicing.
- Keep a log of all maintenance activities for future reference.
By following these steps, you can keep your VST Shakti 130-DI power tiller in good working condition.
Негізгі бет Vst shakti130-DI new powertiller//servicing karna Sikho🫵🔥
Пікірлер: 4