Probably wouldn't hurt to take her for a spin, then change it again until you get all that nasty contaminated oil out of there, being its a simple process, if she was mine, picking up a 09 vtx 1300T this week. Nice video/Nice bike!
@williamdawson3792
2 жыл бұрын
I have the same bike, color and everything. I have the 1300C. Greatest bike I’ve ever owned. 50,000 no problems runs like new. And no oil tracking system like Harley Davison.
@haydenshores7252
7 ай бұрын
Same, mines got 87k, still no issues
@jetmelt
Жыл бұрын
From the manual ride the moto first to warm the fluid. Slowly turn rear wheel to drain all the old oil. I did notice plenty of extra comes out when you roll the bike forward. Place moto on its side stand on level surface to fill. This is hard to do straight from the bottle because you have to get the nozzle in pretty deep to get past the shelf inside there. Next time I’m going to fill it with a turkey baster or something. Update: I bought a proper oil can for the job
@thr3ddy
Жыл бұрын
Lots of gear oil comes in bottles with a spout, too.
@whoopdebefreekjesus
11 ай бұрын
Note that the socket size for the bolts is 17mm (not mentioned). Best to warm the oil some with a 3-5 min ride so all the 'crap' is stirred up better to flow out, and rotate the wheel a few turns while draining to get it all out. Cute dog added some entertainment. Thanks for not adding annoying music, like many of these vids do. 👍
@dailygarageadventures2848
11 ай бұрын
Yes sir yes sir! And I definitely did not warm it up before hand I'll have to do that next time !! Thanks man!
@ronnieford6617
Жыл бұрын
Thanks for the post it's very helpful and basic when you get to see how it's done 👍
@airjock40
3 жыл бұрын
awesome and professional video...just did mine and while is was draining, I was able to give Lola a little cleaning...'04 VTX 1300C
@dailygarageadventures2848
3 жыл бұрын
Heck yeah brother!! I appreciate it!
@drivewaygarage1561
2 жыл бұрын
I'm going to look at a 2004 today, this gives me something to think about as far as maintenance. Thanks for the video
@clue0001
2 жыл бұрын
How was the bike? Did you get it? 👍🏻
@drivewaygarage1561
2 жыл бұрын
@@clue0001 I did but I didn't keep it because my wife hates motorcycles
@clue0001
2 жыл бұрын
@@drivewaygarage1561 oh, I see. It happens I guess. 🤔
@davidallain9451
4 жыл бұрын
Would love to see a brake fluid change! Bout to do one myself and no one does videos as nice as this one online! Thanks for not editing out the good stuff!
@dailygarageadventures2848
4 жыл бұрын
Appreciate that man! Ill see what i cant do about a fluid change video for you since i have to do my brake pads anyway! Stay tuned
@darryle.ricerice2207
Жыл бұрын
Thank you, Brother. Definitely, a smooth process 👍🏾
@hunteroftruth4986
4 ай бұрын
Excellent helper you had there! Thanks for the video!
@PainterD54
7 ай бұрын
You should drain it on the side stand so you get it all out first, then lift it on a level stand to refill it.
@farooqkhan3729
4 ай бұрын
bingo - surprised no one else noticed that. Must tilt on side stand to drain fully. In fact, even rotate wheel - more old oil comes out.
@OzarkHillsRider
3 жыл бұрын
Great video. I just bought me a VTX and I know how to do this now . Thank you
@НаильМухаметдинов-ч5ш
4 жыл бұрын
Hi! I am from Russia, I had like your masterclass!
@rjuarez4913
4 жыл бұрын
The top nut is easy to crack the integrated shoulder washer portion by over tightening it. So be extra careful tightening the top bolt or it will crack!
@dailygarageadventures2848
3 жыл бұрын
Definitely good advice!!
@robert-wr6md
4 ай бұрын
thanks all good stuff.
@JoseMartinez-fr2bv
3 жыл бұрын
You doing a coolant flush anytime soon? Make a video 👍 this one was good.
@crouchingwombathiddenquoll5641
3 жыл бұрын
Thanks from Australia 👍🏼
@toddbarton2014
Жыл бұрын
Thank you very helpful
@snorkellingschool
4 ай бұрын
The instructions say to place your bike on a side stand on a flat surface. It does not say to be positioned straight. If you position your bike straight and fill the lower limit of the oil inlet, the amount of oil will increase, what do you think?
@dlrpehd1
3 ай бұрын
영상 잘봤습니다 고마워요 저는vtx1300 2008년식이예요 대한민국에서
@davidreichert742
7 ай бұрын
Great video! No b.s. ... Awesome
@tiborj.czegledi8230
6 ай бұрын
Thanks for the video.
@ДмитрийГлухарёв-р5щ
Жыл бұрын
отличное видео БРО спасибо!!
@sadlr
4 жыл бұрын
Just bought one of these yesterday. Thanks for the help!
@dailygarageadventures2848
4 жыл бұрын
Appreciate the view! If you have any questions or want to see how something is done just let me know !
@countylinecnc
2 ай бұрын
Is there a place to check the transmission fluid?
@lstruggy
2 жыл бұрын
Nice bike! I inherited one of these bikes recently 06 vtx1300r good condition w 11k miles stock. Just had Honda dealership did oil change, radiator flush, brake lines flush and new fuel tubings plus getting the carb rebuild and the fuel tank resealed. The plan is to sell it u think I’d have a hard time selling this bike in its current condition? I’m a total noob when it comes to motorcycle nice Camaro btw! 👍🏽
@dailygarageadventures2848
2 жыл бұрын
The only issue you may run into is timing since its right before Christmas, but other than that you shouldn't have any problem selling it !! I sold mine withing a few days of posting it! And thanks man I appreciate it, i just put a fresh LS3 from blueprint in it, I dropped a valve in the stock motor 😅🤦♂️
@lstruggy
2 жыл бұрын
@@dailygarageadventures2848 Whoaw LS3!!! 🦾 my buddy has a 2016 black on black ZL1 and I kid you not I was holding on to the oh shit bar the entire time he took me for a test drive! 🤢 Two wheel Rocco from YT adviced me also if I could wait around Riding season or tax return time to sell it he said it shouldn’t be an issue. Tnx for the reply bro! 🤙🏽
@chadsloan2522
2 жыл бұрын
What is in that plastic container on the bottom of the bike? On the very bottom?
@dailygarageadventures2848
2 жыл бұрын
That's the coolant reservoir !
@chadsloan2522
2 жыл бұрын
@@dailygarageadventures2848 thanks!
@andrewscarlett2225
2 жыл бұрын
I have a 2015 Stateline 1300. First bike. Would you change this oil the same frequency as the engine oil? What would be the mileage you would recommend on these changes?
@dailygarageadventures2848
2 жыл бұрын
I believe honda recommends every 15k miles for the rear diff/drive oil. For the engine oil I usually do about every 2 to 3 thousand miles depending on how hard I've been on the bike
@alexanderserrano7862
2 жыл бұрын
What cup holder is that?! Please somebody answer lol
@dailygarageadventures2848
2 жыл бұрын
Hahah 😅 that was the first thing I bought for the bike man !! It's called a "Kruzzer Kaddy" (link below off amazon) www.amazon.com/Kruzer-Kaddy-200-Chrome-Handlebar/dp/B009RNQLE0/ref=mp_s_a_1_4?crid=1UEZVQEIHWXN5&keywords=motorcycle+cup+holder&qid=1652298953&sprefix=motorcycle+cup+holder%2Caps%2C240&sr=8-4
What would you like to see man, we have actually done a bunch of stuff to it but didn't film it 🙄
@Worst_YT_Channel_Ever
3 жыл бұрын
@@dailygarageadventures2848 maybe the air filter and coolant change.. Also, something to consider and what I don't see a lot is a when done a "putting it back together" portion of a video.
@broinsocali
3 жыл бұрын
Glad you didn't tip your bike over.
@josesantoshernandes5881
3 жыл бұрын
Cuanto aceite lleva ai en el cardan
@dailygarageadventures2848
3 жыл бұрын
reloj 5:35. no se puede llenar en exceso
@Outsourcer
Ай бұрын
Only one fault, the bike shouldnt stand upright during new oil squizzing in! rtfm ;-)
Пікірлер: 57