Hi Ernest Can You Please Tell Me The Best Setting For My Vulcan 3 To Shoot ZAN 35 GRN Slugs. IE Reg Presure And FPS Regards Stan
@morriszambernardi9145
4 ай бұрын
good morning, where can you buy the tester?
@aylinsarayguamanalvarado8335
5 жыл бұрын
hello friend greetings from sub America, I have a Vulcan tactic 5.5, I had problems with the regulating valve since it was full of rust, now I want to know as soon as the valve is left regulated as it left the factory ... help please
@thiagocoelho2060
7 жыл бұрын
Hello! okay? I would like to know the diameter of the Vulcan valve or what would be the internal diameter of your reg test or the device you are using to know how many bar the valve is in?
@CygnusX250
6 жыл бұрын
awesome videos ....my vulcan .25 is about 880fps with 25gr jsb....would like just a little more power like 920fps...what do i set my reg at ?
@constructiondevtcorp.6864
8 жыл бұрын
hello if i wanted to buy a different regulator for this gun where can i get one. does it have the same size as the cricket .25 or the altoros regulator for the evanix max . thank you much.
@CenturyTTR
Жыл бұрын
Hola a cuanto regular la valvula para lograr 1000 fps con 30 gr ?? Puedes ayudarme...Gracias
@joearrieta
7 жыл бұрын
Can the reg be adjusted without removing it? If so, can you make a video of to show us how?
@desmondspamer5097
Жыл бұрын
Where can I buy the regulator tester?
@constructiondevtcorp.6864
8 жыл бұрын
hello i have a vulcan .25 at 250 bar im getting 35 shots at hi 928 lo 915 av 922 es 13 sd 2 is that good or should i get more shot per fill? i think the regulator falls off at 140-145 bars. thanks
@ernestrowe5061
8 жыл бұрын
+sactown airgunner thats normal shot count at that speed, has a short air tube!
@briankelly8457
8 жыл бұрын
hi do you use same reg tester for both cricket and Vulcan?
@bunnybasher9304
2 жыл бұрын
Is this the same for the Vulcan 3
@omarhakami2900
3 жыл бұрын
Can you help me where to buy this tester
@marcooliver48
3 жыл бұрын
Do you have the valve orrings size please
@MasonStormSunny
8 жыл бұрын
How is that possible that you dump the pressure of the regulated side by simply dumping the pressure of the unregulated side?
@ernestrowe5061
8 жыл бұрын
+MasonStormSunny Simple---supply side compress the spring disk to keeps the valve shut when reg pressure at set point---so if you cant keep the valve shut it will dump the reg side.
@ernestrowe5061
8 жыл бұрын
+Esting Rowe unless there is a check valve on the foster---my test rig don't have one installed---its faster for me testing a lot of reg--I don't have to bleed the reg side---I dump both side by bleeding the supply line.
Пікірлер: 24