Hi have just followed and replaced clutch etc. didn’t take note of where the 2 long bolts go in the bell housing. Any info much appreciated. Crafter 2008 2.5. Cheers
@releasedmike
Жыл бұрын
Like the video mate I thought about doing mine because I think my flywheel has gone bad and I’m finding it hard to get the starter to turn over it turn and kills the battery in no time all this started to happen after I replaced the injectors after they had failed and the van lost power I put it down to the injectors so I replaced them and the starter just to be on the safe side but I’m still having the same problem with the starter so I can only assume it’s got something to do with the flywheel
@michaelclassic2613
Жыл бұрын
well you talking about the injector maybe you take off all injector out and then start the engine to spin over quickly it Canby diesel on the piston that’s why you’re injured and seized or spinning slowly did you change the starter motor or no?
@releasedmike
Жыл бұрын
@@michaelclassic2613 yes mate I changed the starter motor and 3 injectors and reprogrammed them and put a brand new battery on I checked all the fuses and relays the only thing I didn’t do was to turn the engine with the injectors out tho so I will try that today my cusin reckons it’s diesel knocking but I’m not confident it is also if I put my foot on the clutch it will spin the engine easily that it will with the clutch not being used
@releasedmike
Жыл бұрын
@@michaelclassic2613 I toke the injectors back out and tried to turn it over with them out no luck unfortunately
@michaelclassic2613
Жыл бұрын
My phone number 07403159481 send me a video in WhatsApp. How does that sound look like?
@michaelclassic2613
Жыл бұрын
00447403159481
@PJlondonlad
Жыл бұрын
Hi mate do you have the part numbers for the kit you used
@Denver_place2001
11 ай бұрын
hi can you do mine as well ? its a 2014 . where are you located ?
@michaelclassic2613
11 ай бұрын
Peterborough
@user-fe3di8pq6j
6 ай бұрын
Hi have just followed and replaced clutch etc. didn’t take note of where the 2 long bolts go in the bell housing. Any info much appreciated. Crafter 2008 2.5. Cheers
@michaelclassic2613
6 ай бұрын
It’s on the top, so the long one it’s not gonna go on the short one. Don’t worry just put the screwdriver in you will know which one the longest go in
@PJlondonlad
Жыл бұрын
Hi mate do you have the part numbers for the kit you used
Пікірлер: 17