Hi David , thanks for the video , i will be rebuilding mine tomorrow,with this video playing along side as a guide.
@steelavocado1
Жыл бұрын
about to dive into mine! couldnt figure out how to press out that little timing retainer thing at the bottom but I guess I now know! I just got a 1300 for 200 bucks and will be building it to a 15 or 1600 single port! Cant wait.
@FixinBugsNStuff
Жыл бұрын
Very cool.
@danielhurt2954
2 жыл бұрын
Great video helped me with my 111-905-205T think that's the UK number for this dizzy 👍🏻
@FixinBugsNStuff
2 жыл бұрын
I used to do a lot of these but, now there is not much demand for them.
@ocavant
Жыл бұрын
The “plugs” as you called them are typically vents so air can circulate inside the unit. This is important to mitigate any potential gasoline vapor getting inside and igniting due to the open spark of the points.
@tomgcolemangoplayer
10 ай бұрын
One of my shims has worn through, where can I buy new shims? I'm restoring a 009
@Hnsclmns
3 ай бұрын
How did you attach the ground wire. Easy to solder? Any tips?
@FixinBugsNStuff
3 ай бұрын
Easy to solder, not too bad.
@Hnsclmns
3 ай бұрын
The solder won’t stick. New groundwire keeps coming loopse.
@FixinBugsNStuff
3 ай бұрын
Clean the area very well and then solder.
@jamesputich
4 жыл бұрын
is that a craftsman versa track rail you have hanging under you cabinet? if so, where did you get those small bins that you have hanging on it? I haven't seen those in any store and would like to add some to my wall
@FixinBugsNStuff
4 жыл бұрын
Yes. The small bins are from the gladiator series.
@redram646
2 жыл бұрын
I have a 73 beetle and when I take the cap off I can push down on the rotor a bit and it springs back up. Are they spring loaded ?
@FixinBugsNStuff
2 жыл бұрын
The rotor itself has a spring tab to hold it in place. If the rotor is moving up and down significantly, then you may need a rebuild.
@mra2957
5 жыл бұрын
David, great video 2 questions, what is your source for the fiber, shims and oil felt? What tools did you use for polishing? The final results are awesome.
@knockout818
4 жыл бұрын
Mra1507 Mra1507 call century distributors in Visalia,California. Google it for contact info.
@FixinBugsNStuff
4 жыл бұрын
I got the distributor parts from here: www.vwnos.com/ I just used a chrome polish on the case.
@Musickfreakbrown
5 жыл бұрын
Would this distributor be good for a 1641 with a 34 pict 3?
@FixinBugsNStuff
5 жыл бұрын
This would not work with a 1641 because of the vacuum requirement.
@jonl8876
5 жыл бұрын
Brown, you’re looking for a 0231-170-034 Bosch distributor.
@mastermatt289
4 жыл бұрын
Where do you get your distributor fiber shims from?
@FixinBugsNStuff
4 жыл бұрын
I got it from here. www.vwnos.com/
@rickwoolverton7507
20 күн бұрын
Do I need the ground strap if I have a compu fire electronic module? What is the purpose of the ground strap? What is it grounding? Thx
@mastermatt289
20 күн бұрын
@@rickwoolverton7507 ground strap on dist? Yes I believe so but you can try it without
Пікірлер: 25