Helping video, but why you added water? the level was ok between Min and Max limits
@markotoole7937
8 жыл бұрын
Really informative video mate. I'm going to give this a go and get the multi meter out. Been getting the same issues on my MK5 GTI
@golfwagen4173
8 жыл бұрын
for VW is a known issue
@ioandavid538
4 жыл бұрын
super util...gracias
@minoX6
Жыл бұрын
Can someone explain please? So the water was low, checked the resistance was quite high started adding water resistance back to normal level ok so what’s wrong ? Is the sensor faulty? How to replace if do. YOU CAN JUST LET US GUESSING
@pearldragonz
10 ай бұрын
A little context would have gone a long way. Was this sensor faulty or not? I saw a lot of video footage but not one word or text box explaining what you were demonstrating.
@100roberthenry
5 жыл бұрын
Was that 1.5k, or 1.5ohms?...cheers.
@AdekTaufik
7 жыл бұрын
i have vw golf 5 (1.4 16v), but my question is i'm looking the low pressure connector for ac recharge. it will be great if you have the info where's the position or located for the connector r134a
@golfwagen4173
7 жыл бұрын
Need to be traced. I have not searched yet
@pablogin59
7 жыл бұрын
i had exactly the same problem i fild up coolant and problem resolved vw golf mk5 1.9 tdi bkc
@golfwagen4173
7 жыл бұрын
Proszę bardzo, mogę z przyjemnością jeździć
@RClittleKING
7 жыл бұрын
how do you change the sensor?
@golfwagen4173
7 жыл бұрын
sensor is part of the reservoir (two wires), it would have to replace the entire reservoir
@skltfz4997
Жыл бұрын
so is it working or not? i dont understand lolk
@aurimaslab4275
7 жыл бұрын
Audi a3 8p 2005, same problem. How to fix it? Coolant level sensor replacament?
@golfwagen4173
7 жыл бұрын
The sensor is part of the container, the entire container to be replaced or simply topped exceed the MAX
@aurimaslab4275
7 жыл бұрын
So it's sensor fault?
@golfwagen4173
7 жыл бұрын
Aurimas Lab yes
@aurimaslab4275
7 жыл бұрын
But there's only to "wires" inside. How can they fail?
@golfwagen4173
7 жыл бұрын
what time is coated
@Juppie902
2 жыл бұрын
I changed TB + WP + thermostat + coolant reservoir and doing a system flush with tap water with citric acid, so its normal for this water to be conductive and raise the coolant light ? Otherwise sensor brand new nothing yet on the probes. Old coolant mixed and looks rusty. I think when I will put G12 mix in it will stop the issue. Ill clean the coolant tank once im done with flushing for better service life of the bottle. Cheap from china.
@omarkhaled4446
6 жыл бұрын
What voltage is right ?
@richardcloudbase
6 жыл бұрын
He is measuring resistance M8. Difficult to see the scale he is using. Looks like 200 Meg Ohm, so between 1.3 and 1.5 M ohm is OK
Пікірлер: 32