Yes Nathan, another quality repair from DTE, you go into so much detail, as said before your channel should be global.
@YTDTETV
Жыл бұрын
Hey Nigel, the comments like yours make the channel worth while honestly 👍 I’ve started to earn a couple of quid from doing it but the comments and support and worth more so thank you for always taking the time 🙏
@scorcha100
Жыл бұрын
Now thats what you call a proper repair 👌🏾
@YTDTETV
Жыл бұрын
Thanks scorcha appreciate that sir 👍👍
@chrisneillcrn
Жыл бұрын
Just discovered your channel and working through past videos. Really great stuff.👍
@YTDTETV
Жыл бұрын
Hey Chris thank you mate glad you found the channel 👍 appreciate the comment.
@sausage7064
Жыл бұрын
Top job by a top geezer. Can’t wait for that T5 build I’m on the lookout for one to camper up. 👍🏼
@YTDTETV
Жыл бұрын
Hey bud thank you really appreciate the comments and kind words 👍 I’m keen to get into the T5 to, there’s plenty out there just a case of waiting till you find the right one.
@davidriley9194
2 ай бұрын
2:56 “Oooh hello cheeky!”😅😅 I said exactly the same thing when I find something!😂😂 That is one fantastic job you did on the sill repair!😊
@ghosttownlives
Жыл бұрын
loving the projects. your tutelage is second to none. so a bug thankyou. im also in the early stages of a t5 build so i can WAIT to see yours take shape. aaah yeahh!!! 😄🍻🍻
@YTDTETV
Жыл бұрын
Hey bud thank you really appreciate that 👍 I’m looking forward to getting stuck into the T5 to.
@mrwhite292
Жыл бұрын
Quality workmanship as always, thank you for the video, take care, justice and peace.
@YTDTETV
Жыл бұрын
Hey simon sorry for the delay mate, thank you as always 🙏
@StueyMonster
8 ай бұрын
One of the best sill repair vids I've seen for the typical Golf Mk5 sill issues. I have a mk5 TDi 4Motion and both of mine are pretty bad. I was shocked there was a clear golf ball size hole when you pealed the underseal off, goodness knows what mine are hiding. I was very pleased you sprayed some zinc and wax in there after you were all done, that was always going to be my plan as I was aware of the large hole under that plug from previously removing my liner. A job for the summer now :) I've been going back through your vids and I'm impressed, a local Kent lad too (I'm from Faversham).
@YTDTETV
8 ай бұрын
Hey bud thank you 👍 only some of them seem to go and most don’t but I guess they are getting a little older now. Yep gota get something to keep the rust at bay after paint so a little bit of zinc and wax in there, oh blimey you ain’t to far away at all 👍👍
@Jackoc1382
Жыл бұрын
Another good video. Been putting the sills off on mine for ages. Going to tackle this in the summer
@YTDTETV
Жыл бұрын
Thank you mate appreciate that, glad the video is useful 👍
@deeharvey8669
Жыл бұрын
Loving the videos mate! I’ve gone back and watched most of your videos 😂
@YTDTETV
Жыл бұрын
Hey Dee thanks mate I appreciate the support 👍👍 there’s a few KZitemrs I watch and I’ve watched there channels back to front a couple times.
@trev.mcevoy6393
Жыл бұрын
Really like watching your videos pal learned so much by watching them
@YTDTETV
Жыл бұрын
Hey trev thank you 👍 glad people enjoy watching them and they have some use.
@karl3927
Жыл бұрын
Thank you for the video Nathan. Nice job you did on the sill repair. Sad to Golf go, but as you rightly said you can't keep them all. Looking forward to the T5 build - ah yeah. 👍
@YTDTETV
Жыл бұрын
Hey Karl thank you as always mate really appreciate it, 👍 if I had a small plot of land of my own and a few more pennies in the bank I’d keep them all but this one frees up some monies for the T5 and the black golf. I’m keen to get on with the T5 👍👍
@matttaylor1372
Жыл бұрын
Great repair on the sill Nathan 👍 I'd be over the moon with a repair like that, absolutely over the moon 🙂
@YTDTETV
Жыл бұрын
Thanks Matt appreciate that 👍 I’m happy with the repair, I see a lot of plates just stuck over the top rusting out in no time and wanted mine to last.
@matttaylor1372
Жыл бұрын
@@YTDTETV Exactly what's happened to me last month when I needed a repair doing. The bloke who did it came recommended too. Just goes to show how people's ideas of a good job differ from each other. I had a bad feeling about it from the start. Should have gone with my gut feeling lol.
@YTDTETV
Жыл бұрын
@@matttaylor1372 your right some people’s good jobs are alot different to others, I’ve learnt to ask if I’m unsure on what type of job they want straight away that way pricing can be different and most importantly a customer isn’t unhappy when they collect there vehicle.
@Teghead
Жыл бұрын
Really nice - educational, encouraging and entertaining video mate.
@YTDTETV
Жыл бұрын
Thank you maté really appreciate that 👍
@Z1mmermans
Жыл бұрын
Great attention to detail as ever buddy. You are a true credit to the industry and thanks for showing us amateur plebs. 😂
@YTDTETV
Жыл бұрын
Hey Scott thank you sir 👍 I do my best to simplify things I’m sure most people can do it.
@paul54310
Жыл бұрын
Great video now that’s how to do a welding job properly fantastic work 👍🏻
@YTDTETV
Жыл бұрын
Hey Paul thank you really appreciate that 👍 I see alot of patches stuck over the top without any anti rust and they barley last a year.
@kentallen9856
Жыл бұрын
Very interesting watching as always Nathan.
@YTDTETV
Жыл бұрын
Hey bud thank you really appreciate your comment 👍
@Boatlife1964
Жыл бұрын
Amazing skills mate…great how to. Proper job.👍
@YTDTETV
Жыл бұрын
Hey bud thank you really appreciate that 👍👍
@kaydentitford3628
Жыл бұрын
Top job mate, well bloody done, someone will definitely have a great motor there dude, great video mate nd always a great watch, top bloke
@YTDTETV
Жыл бұрын
Hey mate thank you always appreciate your comments 👍
@johnmcghee5281
4 ай бұрын
Great video Great work
@stuartforbes2825
Жыл бұрын
Another furfectt unist job as usual Nathan all your work is and someone will be getting a good car with all the jobs done so will not have to worry and hopefully trouble free motering for awhile I'm looking forward to the golf GT keep the good work up as useual
@YTDTETV
Жыл бұрын
Hey Stuart thank you mate 👍 done all the little jobs so hopefully someone has trouble free motoring. Appreciate the comment.
@simoncutler5542
Жыл бұрын
Looks spot on mate very good job
@YTDTETV
Жыл бұрын
Hey simon thank you mate appreciate the comment 👍
@t5jerry
Жыл бұрын
Love the way you work and act Lewis, a proper gent who does things properly, a VERY rare commodity nowadays, keep up the good work mate, I think once you get really discovered on utube, you'll take off.....🚀🚀🚀
@YTDTETV
Жыл бұрын
Hey bud thank you I really appreciate that 👍👍, LUCAS was my late sons name unfortunately he passed away a few years ago but that’s another story. My name is Nathan 😊
@t5jerry
Жыл бұрын
@@YTDTETV really sorry to hear that Nathan, sorry about the mistake...😔
@YTDTETV
Жыл бұрын
@@t5jerry hey Jerry no problem at all mate 👍
@james3418
Жыл бұрын
Good job as always mate
@YTDTETV
Жыл бұрын
@@james3418 hey James thank you mate appreciate that 👍👍
@Astra8676
Жыл бұрын
Brilliant video mate, well explained!!!
@YTDTETV
Жыл бұрын
Hey bud thank you appreciate that 👍
@tonynightingale4400
6 ай бұрын
Not a bad repair , I wouldn't class this a permanent restoration to OEM . The problem will soon reappear as filler was applied to bare metal , no weld thru primer used , no etch primer. This was a repair not a permanent fix.
@thatcrazyguyjay
Жыл бұрын
oh yeah awesome work bro love it
@YTDTETV
Жыл бұрын
Hey bud thank you really appreciate that 👍
@carlsiddorn4385
Жыл бұрын
Nice professional job there mate
@YTDTETV
Жыл бұрын
Thank you as always Carl appreciate that mate 👍
@neildixon6661
Жыл бұрын
Top work as always 👍
@YTDTETV
Жыл бұрын
Thank you Neil always appreciated 👍👍
@upthereddevils
Жыл бұрын
Brilliant job on the cill,the last mk 5 golf I went to weld a 3 inch patch on the cill ends up being 2 foot long 🥲🥲
@YTDTETV
Жыл бұрын
Hey bud thank you appreciate that, yes I’ve seen so many welding jobs grow massively when cleaned off I was lucky on this one. The problem with so much stone chip is that when water gets in there it can’t go anywhere except cause more rust.
@gabe.harvey
5 ай бұрын
Love the vid super helpful
@timbird5494
Жыл бұрын
Cracking job mate 👏👍
@YTDTETV
Жыл бұрын
Hey Tim thank you mate appreciate that 👍
@davidladd2962
Жыл бұрын
Great work looks amazing
@YTDTETV
Жыл бұрын
Thanks David appreciate that mate 👍
@griffogriff9532
Жыл бұрын
Great videos, really helpful 👍
@YTDTETV
Жыл бұрын
Hey bud thank you really appreciate that 👍
@martinmackenzie5726
Жыл бұрын
Nice neat blend with the stone chip
@YTDTETV
Жыл бұрын
Hey Martin thank you, it can be tricky trying to recreate stonechip as manufacturers lay it on really nice and thick and getting a similar consistency from a shutz gun. Appreciate the comment 👍👍
@francishagen8508
Жыл бұрын
Finally Saturday, thanks 😊
@YTDTETV
Жыл бұрын
No worries francis thank you as always 👍
@vwtransportersandmotorcycl3729
10 ай бұрын
Top work as usual 👌
@YTDTETV
10 ай бұрын
Thank you mate 👍
@VW25
Жыл бұрын
I just found you, I'm so fucking glad there is people like you, man is a fucking endless well of knowledge fucking fantastic
@YTDTETV
Жыл бұрын
Hey bud sorry for the delay I’ve been away, I really appreciate your comment and glad you found the channel 👍👍
@VW25
Жыл бұрын
@DTE TV don't worry about replies, eventually there's too many. Content on mk5 golf is nowhere to be found, I got a 4motion BKD I'm trying to restore so anything mk5 related is gold dust
@YTDTETV
Жыл бұрын
@@VW25 thank you I try my best to reply to everyone, you take the time to message me so the least I can do is reply. Ooo a 4 motion one I’ve been thinking about getting one for track days as mine went like stink but just span up on the corners I can image the 4 motion would fly round.
@VW25
Жыл бұрын
@DTE TV I had disregarded the 4 motion as extra weight, extra drive train bull shite, all the above, but saw a project car with it and all the retrofitted parts I wanted and thought f it.
@alanhowarth1898
Жыл бұрын
Love the video again mate you are getting much better at the videos you are really good at paint work can't wait for you to paint the t5 going to look sick
@YTDTETV
Жыл бұрын
Thank you Alan really appreciate the feedback about the videos 👍 I’m looking forward to the T5 to.
@alanhowarth1898
Жыл бұрын
@@YTDTETV yeah mate would be able to fit a lot more fishing gear in it
@YTDTETV
Жыл бұрын
@@alanhowarth1898 haha loads more room for fishing gear 😎
@alanhowarth1898
Жыл бұрын
When is the next video coming up mate been awhile
@YTDTETV
Жыл бұрын
@@alanhowarth1898 hey Alan I am slightly behind I do apologise, I have all the bits to progress so I’ll be starting tomorrow 👍
@grantssmartrepairs
Жыл бұрын
great repair mate and great video 👊🏻👊🏻👊🏻👊🏻👊🏻👊🏻
@YTDTETV
Жыл бұрын
Thank you grant appreciate that mate 👍👍
@karter5351
Жыл бұрын
Nice job DT. I threw an old MGZR away when it needed a sill repair like that. Wish I'd run it down to you, you'd have sorted it in a jiffy
@YTDTETV
Жыл бұрын
Hey Karter thank you mate 👍 I’ve done loads of sills over the years, this one happily was just a small one.
@volvos60bloke
Жыл бұрын
this is fabulous!
@YTDTETV
Жыл бұрын
Thanks bud appreciate that 👍
@spiderdad00
Жыл бұрын
Great video nice job
@YTDTETV
Жыл бұрын
Hey Tim thank you mate appreciate that 👍
@christinamacintyre9972
9 ай бұрын
Champion work
@YTDTETV
9 ай бұрын
Thank you 🙏
@ragnarironspear1791
Жыл бұрын
Nicely done 👍🏻
@YTDTETV
Жыл бұрын
Thank you mate appreciate that 👍👍
@johnc.fonseca8961
11 ай бұрын
Great work.
@YTDTETV
11 ай бұрын
Thajk you John appreciate that 👍
@anthonyhoran2543
Жыл бұрын
Love the attention to detail in getting the stone chip lines in. I see a Mazda bongo in the background, is that one up for a series on
@YTDTETV
Жыл бұрын
Hi Anthony thanks for the comment appreciate that 👍 that’s my Nissan elgrand, very similar but the jap version. If there’s enough want for it I’d do a series on it I love that bus.
@chrispink72
Ай бұрын
Nice repair that mate, do you know if when you take the rear arch cover off a caddy, is there any space to get something to push out a dent near rear lights ?
@MrOrbitzHD
Жыл бұрын
great video
@YTDTETV
Жыл бұрын
Thank you mate appreciate that 👍👍
@sidpf1972
Жыл бұрын
Top job pal Your missus must give you some grief,with the hours you put in 😂
@YTDTETV
Жыл бұрын
Hey bud thank you always appreciated 👍, the mrs is super she has everything she asks or needs for and I’m always there at the drop of a hat but.. since the boy had to leave I have to do my own thing and try to be happy and that for me is playing with cars sort of keeps me sane.
@sidpf1972
Жыл бұрын
@@YTDTETV top man, even though we have never met , i know you are a top guy Keep up what ever keeps you sane All the best 👍
@YTDTETV
Жыл бұрын
@@sidpf1972 it’s top comments like yours that keep me going so thank you for supporting I much appreciate it 🙏
@georgecatalinnicuta8559
2 ай бұрын
You repair like you do it for your own car. I have to do this on my car, but it would have an additional problem. The thresholds are blocked, they were hit in the middle and are blocked in such a way that the threshold lightly touched the bottom of the door and this scratched the paint on the threshold a little. The rust is tiny and is located exactly at the end of the threshold. Do you think that the clogged part of the threshold can be repaired and brought to the front?
@user-hq6ud2om1z
7 ай бұрын
Proper job
@YTDTETV
7 ай бұрын
Thanks bud 👍
@mrwhite3094
Жыл бұрын
Looks great m8
@YTDTETV
Жыл бұрын
Thank you mate appreciate that 👍
@mrwhite3094
Жыл бұрын
@@YTDTETV still got that problem of climbing adl on my bkd touran
@YTDTETV
Жыл бұрын
@@mrwhite3094 when was the last time the fuel filter was changed? I wonder if the injector seals are slightly leaking. It will be really black inside the fuel filter if so.
@mrwhite3094
Жыл бұрын
@@YTDTETV cheers mate il have a look 👍 👌
@mrwhite3094
Жыл бұрын
@@YTDTETV hello mate changed my fuel filter and its still ideing high m8
@MalteseMafia
Жыл бұрын
Great video 👍 came out perfect. Great for those just starting out on bodywork. Did you see those Plasma Cutters in Lidl recently, apparently work very well.
@YTDTETV
Жыл бұрын
Hey Phillip thank you as always sir 👍 plasma cutters in LIdl, no way I am going tomorrow I’ve always wanted one but normally loads of money.
@MalteseMafia
Жыл бұрын
@@YTDTETV they ain't there no more 🤣 was a few months back. A guy on KZitem uses one, JW Fab, does some nice work with it. Check him out. 👍
@MalteseMafia
Жыл бұрын
kzitem.info/news/bejne/qZelsZecg6p-n20
@StevenGodfrey3956
Жыл бұрын
Firstly Nathan just want to say I love your videos and you are very knowledgeable. I'm subscribed ! 😊 I just wanted to ask you if you think it would be a big job to convert my 07 plate mk5 gti to a bkd 140 bhp diesel . I have a donor gt tdi for the conversion. Also Is this something you would be interested in doing ?
@YTDTETV
Жыл бұрын
Hey Steven so sorry for the delay, I really appreciate your comment and glad you enjoy the channel. Yes a BKD would go straight in there would just be a case of fitting the engine loom in with it. It’s not something I could take on at the moment but appreciate the offer 👍👍
@tylercieszenski9624
Ай бұрын
Anyone know what to do when this section rusts away? I know I can weld a new uniside on but really would rather not
@guy4469
Жыл бұрын
Its unbeleivable how many garages have stopped welding cars i needed 2 plates at the rear off my sills at jacking points on my Bmw E38, I rang 7 garages untill i found one willing to doo the job 2x plates cost me £250 ,a lot of the other garages said it time consuming and not cost affective thats why they stopped.
@YTDTETV
Жыл бұрын
Hey guy, I think it’s the same everywhere as most garages round here don’t do it either, I know it’s not the nicest of jobs but it does pay well.
@brianstorm4806
Жыл бұрын
A lot of garages just want to plug diagnostics machine in and change a sensor or knock out services. They dont actually have the ingenuity to do this sort of thing
@bentaylor774
Жыл бұрын
Cracking video Nathan sorry about your son
@YTDTETV
Жыл бұрын
Hey Ben thank you mate appreciate that, also thank you 🙏 was a few years ago now I’m still upright and breathing 👍
@bentaylor774
Жыл бұрын
Keep doing wot you doing mate love you chanel
@YTDTETV
Жыл бұрын
@@bentaylor774 thank you Ben 👍
@Hendrie1975
11 ай бұрын
Nice work,can i ask what type stoneship you use i am looking around to find the same with texture
@YTDTETV
11 ай бұрын
Hi bud thank you, if you have a machine mart near you they sell a stone chip and the bottle goes on a little gun thing. You can also buy it from eBay, stone chip and the gun comes as a kit 👍
@Hendrie1975
11 ай бұрын
@@YTDTETV thanks for the info
@brianstorm4806
Жыл бұрын
Nice job that. I think back to some of the patches I had done on old escorts, fiestas and novas back in the day or welding I have seen on sills and floor pans - looked like patching up the hole in the side of the titanic using old RSJ’s and Road plates LOL. Your repair on that is invisible and it will last. So who was the cake maker? Pav?
@YTDTETV
Жыл бұрын
Hey B-RY thank you mate 👍 yes I’ve seen some awful plates just lashed over the top to. Yes pavo used to be a cake maker, I didn’t believe it at first but yep OL cake baker.
@EricaFiore
11 ай бұрын
Do you disconnect the battery alternator?. Just bought 05 golf needs one sill worked on same place as your golf.
@YTDTETV
11 ай бұрын
Hey bud they say your Ment to disconnect the battery when welding but I never have and never had a problem
@jackjames567
Жыл бұрын
Ahyeee!
@YTDTETV
Жыл бұрын
Thanks Jack 👍
@markrusson9817
Жыл бұрын
Fella random but I'm fairly new to the industry and was wondering where you buy your paint from? Thanks
@YTDTETV
Жыл бұрын
Hi bud so I get my paint from a friend of mine, you can get paint made up to your paint code from Halfords 👍
@farginicehole513
10 ай бұрын
Is that round rubber cover on the floor in lower right corner of the video at 2:18?
@YTDTETV
10 ай бұрын
It is well spotted 👍
@farginicehole513
10 ай бұрын
@@YTDTETV Cheers!
@jimmer1976
Жыл бұрын
Bit weird how some rot and some don’t, I had a Tdi 4motion on 200k and it was like a new car underneath yet I’ve seen other with less miles that are rotten.
@YTDTETV
Жыл бұрын
Hey bud you are so right some stay absolutely mint and some rust. I wonder if some shells where made in a different place or some where made with a different metal.
@ratgreen
Жыл бұрын
Nice repair. I'm doing a load of sill repair on my elgrand currently. Small rust section turned into the entire rear quarter and sill needed cutting out. Shaping the metal with basic tools takes hours. Is that an elgrand in the background at the end of the video? Also what cavity wax is that? Did it come with the 360 degree nozzle?
@YTDTETV
Жыл бұрын
Hi bud thank you 👍 yes it’s an elgrand 😊 3.2d e50. Oh man rust does grow sometimes and yes your right shaping the metal does take some time. My elgrand needs a few patches here and there to, I did look for repair panels but with no luck. I can remember the brand name but yes it had a 360 nozzle, I’ll check brand name tomorrow. Thanks for the comment appreciate that 👍
@ratgreen
Жыл бұрын
@@YTDTETV yeh mines a e50 3.2 too same color too. yeh me neither. Supposedly bongo sills are somewhat similar but I didn't wanna risk it and I already bought a big sheet of 1mm steel to make my own patches anyway. I've been recording most of it so plan to make a video one day. Thanks for looking, I was just gonna spray the inside of the sills with motor oil, as I've already got a 360 nozzle I put on a garden pump sprayer. What's the story on the elgrand I ain't seen any videos about it on your channel.
@YTDTETV
Жыл бұрын
@@ratgreen the 3.2 is the best engine, I’ve seen 2 of the 3.0 ones and they where both broke. I didn’t know that about bongo panels being similar 👍. Ye why not make a video, is good for history of a vehicle and keepsake. I had a Tranist connect and I accidentally spilt loads of oil in the back and I had oil dripping out the sills for weeks after but it never went rusty so it does work 👍. I have mentioned it in one of the early videos but I havnt made a video on it, I will when I weld it up 👍
@4ndy65
Жыл бұрын
Great attention to detail and a well prepped job Finish looks very clean and smooth Im about to tackle the same job. Someone else will weld What did you use to clean out the inside of the sill
@YTDTETV
Жыл бұрын
Hi Andy sorry for the delay, appreciate the comment. I used an air blower to get all the loose rust out then I brushed in some kurust 👍
@4ndy1965
Жыл бұрын
@@YTDTETV Nice tip Thank you😉
@brianknight4595
Жыл бұрын
Hi Nathan ! I am sure you will know but just to let you know if you don’t T5 SEAT ARM RESTS CAN BE FITTED TO GOLF SEATS cheers BRIAN !
@YTDTETV
Жыл бұрын
Hey Brian I didn’t know that 👍 I will be using that thank you
@louisebmedia
5 ай бұрын
How much would you charge if i have a small section like that on my mk6 golf?
@YTDTETV
5 ай бұрын
Hi bud I don’t have any spare time at the moment sorry
@elloellogamingpeahen
Жыл бұрын
hahaa legend thats good enough for the girls we date ;p love the videos love the weilding my mate has a 2008 1.9 gt with 242k on it still going strong love theese german cars man :)
@YTDTETV
Жыл бұрын
Haha I love that sayin and Derek from VGG is a top guy, oh man the vag cars from this era are so well built a lot better than the newer stuff. Appreciate the comment thank you 👍👍
@elloellogamingpeahen
Жыл бұрын
@@YTDTETV hell yeah bro just dont taste the oil like he dose lol :) looking forward to the engine taredown on next video
@YTDTETV
Жыл бұрын
@@elloellogamingpeahen i havnt done it yet but I’m curious after seeing him do it so many times 😂. T5 video is next I’m looking forward to getting the engine out to 👍
@jmom687
Жыл бұрын
How much should full sill replacement cost both sides of that model ?
@YTDTETV
Жыл бұрын
Hi bud I done both full sills on a mk5 golf 2 years ago and it was £300 a side so £600 in total.
@midnightrider6985
Жыл бұрын
Great job 👏 👍 Quick question do you have to disconnect battery as I still have to wield spare wheel nut back on ..?
@YTDTETV
Жыл бұрын
Hey bud you are Ment to disconnect the battery when welding but I literally never have and never had a problem. Thank you 👍👍
@midnightrider6985
Жыл бұрын
@@YTDTETV Cheers Lad 👍 Looking forward to seeing what went wrong with the transporter engine 😀
@YTDTETV
Жыл бұрын
@@midnightrider6985 no worries yes me to, a few people have mentioned water pumps. Soon as the engine is sat on the floor I’ll be tearing straight into it 👍
@midnightrider6985
Жыл бұрын
Hi Nathan just was checking to see if any new videos or updates hope all is well ?
@YTDTETV
Жыл бұрын
@@midnightrider6985 hey bud had a few weeks off but T5 is in the workshop and I’m ready to go. Sorry for the delay thanks for checking in appreciate that 👍
@garygary100
Жыл бұрын
What stone chip you use mate
@YTDTETV
Жыл бұрын
Hey Gary just a basic stone chip from machine mart 👍
@peerless67
Жыл бұрын
Ah yeah
@YTDTETV
Жыл бұрын
Thank you sir 👍👍
@t5jerry
Жыл бұрын
whereabouts are you based mate, i want some work done on me skoda superb and need someone who does it properly .
@YTDTETV
Жыл бұрын
Hey Jerry I’m in deal in Kent 👍
@t5jerry
Жыл бұрын
@@YTDTETV shame, too far away, never mind mate.
@ShamTrucker
Жыл бұрын
🎉❤
@YTDTETV
Жыл бұрын
Ah ye 👍👍
@ShamTrucker
Жыл бұрын
We want more, When do we want it, now , ❤😂
@YTDTETV
Жыл бұрын
Hey bro… one delay after another my end. I like to have all the bits to complete a job/video. Nearly there sorry mate.
@ShamTrucker
Жыл бұрын
@@YTDTETV all good can’t wait for the next one, wasn’t moaning just in high spirits for the next video. Can’t wait 😜
@t5jerry
Жыл бұрын
Whoops, sorry LUCAS, not Lewis 🫢🫢🫢
@YTDTETV
Жыл бұрын
No worries bud 👍👍
@Auxbeam
Жыл бұрын
Hi Do you receive my last email:)
@YTDTETV
Жыл бұрын
Hi there I’m so sorry I’ve been away from the workshop, I’ll check emails in the morning and get straight back to you, thank you 👍
@Auxbeam
Жыл бұрын
@@YTDTETV Sure No problem! Looking forward to hear from you mate!
@Choober65
Жыл бұрын
Bloody VW ALWAYS rot at that point, front wheel arches and under the back of the front wings.
@YTDTETV
Жыл бұрын
Hey bud sorry for the delay, your so right that’s the 2 main spots front wings and rear sills, strange that because the rest of the motors normally stay good.
@Choober65
Жыл бұрын
@@YTDTETV Just replacing the WHOLE sill on a 2007 Jetta. There is a gap at the bottom transition of the sill. Mud collects there and it rots. I've bought a new sill skin, but I'm fabricating the ends myself. Galv primer, then etch primer, epoxy primer then a coat of "Epoxy 121" from RustBuster. That stuff sets diamond hard, but stays flexible. Do all of that and it will NEVER rot again. One more tip, buy some 36% Hydrochloric Acid and paint it on the "clean metal" BEFORE you start work. WEAR A MASK. If it turns yellow, it is killing intergranular rust (rust which is already IN the metal that you can't see). Rinse, dry, repeat until it doesnt turn yellow anymore, then rinse well, dry and paint with "Zinga". Do NOT paint over the Zinga immediately, spray some water on it and leave it for a few days until it turns dary grey, then it is "weathered". I live 20 feet from the sea and EVERYTHING rots, but I've had a piece of steel outside for 5 years which has been treated like this and endured salt spray, rain, hail...NO RUST! PLEASE can you do a vid on how you rolled that edge? I'm scratching my head trying to NOT destroy the panels I buy. Thanks Brother.
@paulbutler6588
Жыл бұрын
Mk5 golfs are rust buckets
@YTDTETV
Жыл бұрын
Some of them are 👍 some stay really clean.
@shh9341
Жыл бұрын
I wish I was your mate so you could do my sills think mine have gone too far tho unfortunately 🥲
@YTDTETV
Жыл бұрын
Hey bud sorry to hear that, I done a grey one and they gone all the way along.
Пікірлер: 196