This description doesn’t come up in the autozone search, where can I get it
@jakekingsley3082
9 ай бұрын
@@1977pancakefrom the dealership bro don’t cheap out on extremely important and intricate parts like this and don’t forget to do oil changes at 5k instead of 10k miles!
@MrMajorPK1
9 ай бұрын
How did you determine this to be your issue? My passat was driving fine then randomly starts to sputterm im going to run the reader on it. But i think this could be my issue as wellm
@treway8531
9 ай бұрын
Can you make a video of how to change it out because my care is doing the same thing
@azul8811
6 ай бұрын
@@jakekingsley3082 What problem is there in following the recommended 10,000 mi interval for oil changes?
@sophiatekautz2858
4 ай бұрын
VW Passat would misfire on and off for months. Engine and RMP would rev/ car would bounce. Got to the point it would just randomly die while at a stop light. VW mechanics and another shop couldn’t trace the engine code that randomly comes on and off. Spent over $1000 trying to fix this. So far this is working! Thank you!
@ChillyChav
Ай бұрын
Going through this right now. VW told me to replace the whole timing and camshaft. Are your problems fixed?
@camiocain5075
26 күн бұрын
can we be honest that VW mechanics are actually brain dead most of the time and will drown your money while making you feel crazy and THEN fix it later. i can’t be the only one dealing with this issue
@djhdz3928
9 күн бұрын
What code was it throwing?
@jmdesales
2 ай бұрын
they tend to misfire when cold, the pin gets stuck with oil slug, as the slug in the magnet warms it works normal. Shot parts cleaner straw through the small holes. The pin will free fall when cleaned no need to buy a new one.
@Murdered0ut150
27 күн бұрын
I just did exactly that and works like a charm 👍🏻👍🏻👍🏻
@Really658
Жыл бұрын
Thank you for the video. It's so simple when you know what you have to do.
@richard1835
Жыл бұрын
Valve timing is critical.
@nicolai2423
2 ай бұрын
This fixed my misfire problem. Great tip!
@rayp.454
Жыл бұрын
Hi OZ! Great tip. Thanks!
@Raylude5
Жыл бұрын
I had one, about a month back, on a Passat that I replaced same part on. It would intermittently run rough. The plunger seemed to work ok when you would flip it over..must of had a week plunger or solenoid. The thing set like 10 codes all from that one issue lol. Lean codes, misfire codes, timing codes, fuel pressure codes..crazy that one part could set all that. Knowing what data pids to look at helped a ton though. Good find 👍
@yanbaihuzxzxzx
Жыл бұрын
Did you change the timing spindle as well. I would if you haven't. Not to hard to change.
@Raylude5
Жыл бұрын
@@yanbaihuzxzxzx no I didn't replace it. To be honest I dont really work on many Euros and at the time wasn't sure if there were any special tools to remove it. I didn't want to take a chance and damage it trying to remove it. It wasn't turning out easily so didn't want to chance it. But yes I would agree as its good measure to change it out as preventitive.
@yanbaihuzxzxzx
Жыл бұрын
@@Raylude5 it can cause alot of misfiring, I changed all this, bought this passat of mine from a used dealership had timing chains and covers that had to be replaced. Magnet and spark plugs well after all that shit, car was still running rough. I said this 140 part was the last thing, replaced it and bam the car ran good ever since. The oil is the big factor in these cars. I wouldn't go past 5k without a oil change for these cars
@Raylude5
Жыл бұрын
@@yanbaihuzxzxzx Couldn't agree more with your comment about oil being a big factor. Will keep the spool in mind on the next one. I got lucky mine was just a magnet issue 🙂
@1977pancake
10 ай бұрын
Where did you get the part?
@shawnqk
2 ай бұрын
The dealer tried to charge me $650 to replace this. I did it myself with an amazon part, works like a charm!
@PacooGuadarrama
9 ай бұрын
Mine was misfiring and changed that part, it solved the problem
@gmann569
5 ай бұрын
What tools did you use to remove it ?
@art-ip4ue
5 ай бұрын
Was it on one cylinder or all misfire cuz mine just saying cylinder 2 misfire I change plug and coil
@art-ip4ue
4 ай бұрын
????.
@diegolinan-guzman9632
3 ай бұрын
I have misfires an all cylinders, did changing this part fix it??
@threadtapwhisperer5136
3 ай бұрын
@@gmann569T30 torx, I hear. Havent gotten to the hey bud project im supposed to be doin this on for a friend of mine. So, take that socket size with a deer season size salt chunk. 😂 If I get to doing the work this weekend, ill try to cmon back and confirm for ya.
@jojohnny911
6 ай бұрын
We are thank you for the info. God bless you!
@tonygarrett3026
6 ай бұрын
You saved my bacon. Appreciate you!
@unclemarksdiyauto
Жыл бұрын
super tip! Thanks!
@WorthlessNickores
4 ай бұрын
My Passat is 2004 1.8T 4Motion with 5 speed manual. I LOVE muh car.
@hectorfcenteno
2 күн бұрын
Thank you Bro!
@Eduardo-vv6lm
8 ай бұрын
Parts you need if thats the case for 1.8 and 2.0 06L109259D 06L109257F.
@JosePerez-lk5lr
4 ай бұрын
The second part number is located where in the car bro?
@maidenmadness1
4 ай бұрын
@@JosePerez-lk5lr it's behind the magnet he pulled off, the magnet fits over it and controls it.
@yanbaihuzxzxzx
Жыл бұрын
Lol if youre going to replace the magnet you might as well replace the camshaft sensor snd value spindle, the spindle is in where the magnet goes, you can see it where the magnet is removed. If your going to remove the magnet might as well replace that lil bastard as well. Also for these engines, change your oil regularly, 5w -40 european oil.
@lostheartmega5388
11 ай бұрын
Thanks do you prefer the Mobil 1 or vavoline?
@yanbaihuzxzxzx
11 ай бұрын
@@lostheartmega5388 if money isn't a problem royal purple
@yanbaihuzxzxzx
11 ай бұрын
@@lostheartmega5388 mobile 1 is OK not great but full synthetic is the only way to go
@lostheartmega5388
11 ай бұрын
@@yanbaihuzxzxzxthanks I use Mobil 1 all the time but I put 87 in it and it started misfiring bad
@yanbaihuzxzxzx
11 ай бұрын
@@lostheartmega5388 going to need to clean the intake valves, I use 93 expensive but gives the car what it needs fuel wise. Cleaning intake valves is next. 1500 to do it at my neck of the woods. Walnut blasting
@MrMoneygreen27
2 ай бұрын
God bless you 🙏
@josephBebawy
9 ай бұрын
Thank you brother ❤❤
@jodyclaudia4394
6 ай бұрын
Bro thank u so much your awesome I ordered part and like you said it was that ...Fixed....badass bro
@OzMechanics
6 ай бұрын
Sweeet glad to hear this helped out
@art-ip4ue
5 ай бұрын
Was it hard to put on or easy ?
@JesusMoreno-td5dd
4 ай бұрын
Easy
@sorasamaelac9082
14 күн бұрын
Damn, I gotta try this
@labrat6910
Жыл бұрын
Thanx bro
@ausencioalatorre915
8 ай бұрын
Where is your shop at I need some professional help
@Vision-MileHigh
7 ай бұрын
Bro you're dope!
@lilsavagegod
4 ай бұрын
Should there be oil in the magnetic adjuster
@ZackGone
2 ай бұрын
Hey that's why I love KZitem because my 2014 Volkswagen passat 1.8L
@Sehmbiparam
4 ай бұрын
You saved my money
@xgearheart8592
4 ай бұрын
Can this happen on a 2022 with 40k miles? There should be a recall fix if it can.
@rayiron
5 ай бұрын
Which one is work? Left side or right side?
@JoeyS5
2 ай бұрын
What’s PIDs were you looking at for this problem?
@crasher88
Жыл бұрын
is that the VW's way on controlling the cam phasers?
@OzMechanics
Жыл бұрын
Yes
@linuskristian
6 ай бұрын
I did the timing chain and hpfp on my vw passat 2006 2.0l FSI, and it's now showing no sign of starting it turns by the crank but doesn't ignite at all
@mandoc7
11 ай бұрын
Whats the name of the part? I have already replaced my ignition coil, my camshaft position sensor, and about to take it to the dealership (which they said it will charge me $500)
@taino3508
8 ай бұрын
Hello, I have the same problem, but coil 1 of the 2012 VW Passat 2.5L burns, and with various symptoms, it is obvious that what you show in the video is a 1.8L turbo, what do you understand it could be, thank you
@dinomasic
7 ай бұрын
Did you change the coil pack and plugs?
@michaelcallwood3919
5 ай бұрын
Thank you, you save me 1200 in dealer bullshit fees in my 2017 VW Passat and i was also able to change myself the part only cost me 55 bucks.
@art-ip4ue
5 ай бұрын
What code pop up was it p0302
@art-ip4ue
5 ай бұрын
@@JesusMoreno-td5dd I'm asking what codes pop up when that happen mine is misfire cylinder 2 change plug and coil still samething
@JesusMoreno-td5dd
5 ай бұрын
@@art-ip4ue well my codes was misfire multiple cylinders and MANY MORE.. BUT haven't been able to fix the Problem yet but I'm going to change that magnet solenoid anyway...I have Spend over 1500 on different mechanics and still they haven't found the Problem I only KNOW that every morning I started the car I leave it at over 2000rpms for at least 10 minutes and the car drives FINE
@JosePerez-lk5lr
5 ай бұрын
What’s the part number?
@art-ip4ue
5 ай бұрын
@@JesusMoreno-td5dd wow thats crazy well mechanic guy I told him about that timing magnet tap part he said it's only if misfire all cylinder to replace it
@daplayer42002
2 ай бұрын
What’s the part number for the 1.8 doe I just recently changed spark plugs coils and it ran fine for like 2 days and den it it started again mis fire cylinder 1 and 2 and still shaking
@azamcoolem5729
5 ай бұрын
does it require to clear code after installation?
@Rickochetti
7 ай бұрын
Too late bud, I got stranded on the highway and had to have her towed🥲
@darknexassasin2382
9 ай бұрын
Does this works for diesel too? Mine starts and off same second it hapens when engine is hot only.. sometimes wont start like 20x or even more ..
@JosePerez-lk5lr
5 ай бұрын
What’s the part number? Can’t find nothing for my vw Passat 2016 1.8
@timshady503
11 ай бұрын
Where can I find this in stores and what's it called need help? Please and thank you 🙏
@hellsk100
10 ай бұрын
If your in chicago you can also do local pickup for free which is nice
@Foreignwrists
9 ай бұрын
Where can I find this part?
@parzival8566
6 ай бұрын
Does it neeeds any calibration ? Can i replace it myself ?
@art-ip4ue
5 ай бұрын
????
@thebigbosss1000
4 ай бұрын
I own a 2012 VW cc sport and for some reason my coolant level it’s below the minimum but I had filled it up to max few months ago what could the problem be ?
@maus_drummer
Ай бұрын
I have a tiguan that keeps doing something similar.. Could that apply to my car as well? Tiguan 2021 se R line.. Help please
@milan724726
7 ай бұрын
I have 1.4 tsi ecofuel 2009 and I have this problem.. can this be the problem in my case?
@MirzaBaig-pp7qc
3 ай бұрын
My Passat b8 during generate burn engine oil . Machanic check that and he fix turbo seal . But still I can smell of smoke inside car and after one week my car oil level goes down . I don’t no this oil goes in dpf or from somewhere else .
@Phillykid99
5 ай бұрын
Gd lookingggggggggg😮😮😮😮😮😮😮😊😊😊😊😊
@hellsk100
10 ай бұрын
Forgot to mention that the bolts are stainless.... sooo dont drop 😂
@ommytzu4261
7 ай бұрын
I have vw passat I changed it but it still misses, if I disconnect it the miss goes away...can help me please
@art-ip4ue
5 ай бұрын
Did you find out the problem
@art-ip4ue
5 ай бұрын
??
@evilrck
5 ай бұрын
Hi what did you look at to confirm this was the issue? Is there some live data I should look at or just change it and see?. My vw looses power when acceleration and gear changes. I am thinking that when going to a higher speed the ecm wants to change timing and it fails to do so.
@herimarydejesus3276
11 ай бұрын
What are the size of the bolts?
@j.marz1
8 ай бұрын
T30 - Torx
@albertomariojorge9007
14 күн бұрын
It is on passat only
@channeltv6595
Жыл бұрын
What’s the part called
@yanbaihuzxzxzx
Жыл бұрын
Magnet
@CROFTY71
Жыл бұрын
I'm not sure what it's called. But I don't think you walk into the auto parts and tell them I've got a Volkswagen model xxxxxxx I need a magnet.
@yanbaihuzxzxzx
Жыл бұрын
@@CROFTY71 if you walk into a Volkswagen dealership they will. Cuz I just done it. They replace these quite often. Some kid working at a advance auto making 15 a hour won't know. Solenoid magnet, or magnet don't know what else to call it the avg mechanic will know.
@ulisesgonzales1281
Ай бұрын
I have a vw Passat 2017 and I have change the spears plug coils pcv valve and still shaking I don’t know what to do next what would you recommend
@leximagnon9686
Ай бұрын
Have you figured out the problem? Mine is doing the same thing. I’m going to replace the magnet and clean the solenoid.
@byronarriola4304
7 ай бұрын
Are those used in 2000 Passat 1.8L? Cause I've never seen it on my ride 👀
@sir.lithium81
2 ай бұрын
Nope completely different engines
@loj70
Жыл бұрын
Hi. Sir Which data PID you look efter ?
@OzMechanics
Жыл бұрын
Look at actual and desired cam angle
@loj70
Жыл бұрын
@@OzMechanics Thank you sir.
@chrissullivan2626
10 ай бұрын
Could this cause low oil pressure intermittently? Having a low oil pressure issue only on takeoff and at 2k rpm. Not trying to do a balance shaft let me know please
@46Bax
6 ай бұрын
what was the cause of the low oil pressure? it's been 3 months, surely you must've found out by now?
@pontiacricer
Жыл бұрын
Is there a way to test it without a scan tool?
@OzMechanics
Жыл бұрын
That would be hard, because you need data
@pontiacricer
Жыл бұрын
@@OzMechanics ok I thought so.. thanks anyway!
@jpmartinez6608
6 ай бұрын
@@OzMechanics What data gave away the problem? idk what any of the live data means.
@thurman0035
11 ай бұрын
Would this give a P0016 code?
@gabehernandez4255
Ай бұрын
Did you find out?
@Vision-MileHigh
7 ай бұрын
You forgot to mention how much the part will cost
@FZERO20
5 ай бұрын
Not expensive at all. Febi sells an aftermarket version which he probably had and the vvt actuator is well priced too
@mmk958
7 ай бұрын
Hello, I have a passat b6 1.6 FSI with error codes 01314, 0310b & p3089. Changed everything and the car still in limp mode with ESP light On. Could this part be the cause of my issues?
@ivanvega2821
8 ай бұрын
Could this camshaft adjuster magnet cause a P0341 DTC? I’m on the struggle bus to figure out what’s wrong with my 2009 Tiguan 😛
@cali2468
7 ай бұрын
Yes it can. A bad VVT solenoid or cam bridge screen can cause P0341 as well as P0011 along with misfire codes on all cylinders.
@ivanvega2821
7 ай бұрын
@@cali2468if not fixed, could it cause long term damage? My vehicle has an engine light but it behaves perfectly fine. No misfires or other symptoms. Thank you for answering my question!
@pauljoey7977
Жыл бұрын
No scantool?
@OzMechanics
Жыл бұрын
It’s a 60 sec video I try to put as much as I can in the small amount of time I have
@angeladarnell1636
4 ай бұрын
I have a 2014 Volkswagen Passat 1.8t Wolfsburg edition. Its in chronic limp mode. I've changed map sensor, oxygen sensor, all plugs, and coils. And still limp! Idk what else to do! Can you help with some suggestions?!?
@artmusic6025
11 күн бұрын
Did you solve the problem? If yes..how did you do it?
@stevenepstein6454
6 ай бұрын
im cleaning mine. im spraying through the small holes next to the pin. oil keeps coming out and it gets cleaner and cleaner. the pin now acts as if it was new. we'll see...
@christopherlewis6270
5 ай бұрын
Did it work?
@stevenepstein6454
5 ай бұрын
@@christopherlewis6270 no. But, my spark plugs were black and burned. I changed those and cylinders 3 and 4 new spark plugs messed up already. Misfires are still happening. I bought new coils, spark plugs, camshaft magnet, seal gasket for that. Will work on that Friday. Maybe it's not the camshaft magnet.
@art-ip4ue
5 ай бұрын
@@stevenepstein6454 did it work homie
@diegolinan-guzman9632
3 ай бұрын
@@stevenepstein6454any updates?? I have a Tiguan 2011 and I’ve replaced the spark plugs, coils, and PCV and I still have misfires in all cylinders along with rough idle and fuel too lean. Did changing the camshaft adjuster magnet help at all???
@jasonr6705
7 ай бұрын
By any chance do you remember the codes thanks?
@art-ip4ue
5 ай бұрын
????
@turbo2greedy
8 ай бұрын
Does this cause the oil pressure light to turn on ?
@OzMechanics
8 ай бұрын
It doesn’t
@turbo2greedy
8 ай бұрын
My magnet doesn’t take as long to fall as yours in the video but it’s inconsistent sometimes faster sometimes more sluggish does it mean the same that it’s bad?
@dinomasic
8 ай бұрын
Hey Oz, I got a question. So on my car I replaced all the spark plugs and coil packs and it’s reading cylinder 2 misfire. Therefore it’s on and off that the misfire occurs then stops. Therefore would it be the cam shaft magnet since I as well replaced the cam shaft intake sensor too.
@OfficialYoungDiz
8 ай бұрын
It can also be an injector gon bad or built up carbon on your intake valves.
@dinomasic
8 ай бұрын
@@OfficialYoungDiz thank you!
@dinomasic
7 ай бұрын
@@OfficialYoungDiz update: i had got my timing chain done and now it’s off to change the vvt today.
@art-ip4ue
5 ай бұрын
So what was the issues I replace coil 2 and spark plug and engine light comes on and traction control light
@dinomasic
5 ай бұрын
@@art-ip4ue I got an update for you, so I had done all the work on mine, replaced all the coil packs and spark plugs, cam shaft magnet solenoid with timing chain and it sorted out all the problems related to it. I had about 237k kms about 180k miles. Therefore regarding to your TCS, it is on because your bearing gone bad, and with it your sensor too. Though if you tell me your mileage i can give you a better answer.
@kaleb1494
2 күн бұрын
I have a diesel
@nickayivor8432
Жыл бұрын
👍 My Mentor Oz Mechanics QUICK-WITTED Oz Mechanics Take care and have a great evening with all your family around you QUICK-WITTED Oz Mechanics From Nick Ayivor from London England UK 🇬🇧 ⏰️ 18:29pm
Пікірлер: 163