You've done a really good job, massive well done. My T4 had to have a mass of welding a few months ago. You'll have saved so much by doing it yourself
@MrWill1986
3 жыл бұрын
Good job dude. About to weld up a few arch holes on my own t4 👍
@pdubs7831
3 жыл бұрын
Good to hear another T4 being looked after, getting pretty rare to see them these days 👍
@mmmmmmmmmmmmmmm420
Жыл бұрын
Well done and well presented.
@colinanslow3897
8 ай бұрын
Well done on your work! 😍
@als_rc
3 жыл бұрын
Hi Paul, had to sub! I have 2002 T4. Totally awesome that your saving Donkey from the scrap heap. Your doing a sterling job and I know I'll be referring to the these vids in not so long (sad face) to keep mine on the road and the adventures coming! All the Best.
@pdubs7831
3 жыл бұрын
Thank you, hope the videos come in helpful
@haskyb9184
3 жыл бұрын
great upload. Need to do the arch on my van. It’s only done 100k and I’m hoping the extent of the rust is only superficial and not as extensive as yours - don’t fancy stripping the camping interior out! 😭 although having watched this I’m a bit more sceptical about how extensive the repair will be. Thanks for sharing
@pdubs7831
3 жыл бұрын
100k isn’t much, how old is it?
@glenmayepete
2 жыл бұрын
Good job
@stinacdutohlav6737
6 ай бұрын
Příšerná práce
@jerryevans6320
5 ай бұрын
Great video, how did you join the wheel arch to the new panel?
@chopperhehehe
3 жыл бұрын
Well done for first time .but you should seam weld arches and the inside arch cut bits not just filler I hope you glass fibered afore you put cataloy on Like I said nice job for first time 👍👍👍😜🏴🦕🙂🤞✌
@colinanslow3897
8 ай бұрын
Hey I have some issues on my t4 and possibly looking for some advice on welding? I'm looking at doing rear inner arch same place and susspension mounts?
@stevemcgowan3017
2 жыл бұрын
So what welder do you use Paul.I did have one go at welding the stick kept sticking,it was an old 2nd hand welder.my 1999 t4 gets used daily on 306000 mile.I’ve fibreglasses little holes so far but will probably need to weld in future
@TrueHunters
3 жыл бұрын
Mein t4 ist 27 Jahre und hat kein Loch Fluid Film 🤙 es ist so einfach. Wie geht ihr mit euren cars um 🙈🤷♂️
@iznogudsurfer5911
3 жыл бұрын
Dann geh in den Keller und freu Dich. 90% der T4 Fahrer sind nicht die Erstbesitzer geschweige denn Zweit oder Drittbesitzer...
@TrueHunters
3 жыл бұрын
@@iznogudsurfer5911 Doch ich schon dritter 🤣🤷♂️ geht doch, und trotzdem voller Wachs
@iznogudsurfer5911
3 жыл бұрын
@@TrueHunters na dann ab in den Keller und freuen
@nehaber9544
3 жыл бұрын
👏👏👏
@pdubs7831
3 жыл бұрын
Thank you 😀
@markspratt9783
2 жыл бұрын
Great vid, need to do all 4 arches on my 2003 T4. Concerned now it'll be a bigger job than I expected! Where did you get your panels from?
@pdubs7831
2 жыл бұрын
If you prepare that the job will be twice what you expect then you’ll be somewhere close. Parts were all off eBay. Sellers names were “epparts” , “just_Kampers” , “quality-performance-parts”
@markspratt9783
2 жыл бұрын
@@pdubs7831 Thank you, sounds like good advice. 🙂
@RicksAquariumsuk
3 жыл бұрын
Hi mate I welded in my driver's rear arch today and noticed the inner arch is about 1 inch away from the outer panel did you come across this 👍
@pdubs7831
3 жыл бұрын
No the two should obviously been joined but I had massive gaps in the areas where the inner had rotten away.
Пікірлер: 27