Cracking job Nathan and a thank for another top video. No one looking at your T5 would ever believe it has done 280000+ miles. You've performed wonders and hats off to you mate 👌👍.
@plumpii7177
2 ай бұрын
My T5 came on old kuhmo and hankooks, plenty of road noise and pulled over the road... t5s are tyre sensitive... im cheap, i run standard steels, and eBay is always flooded with brand new steels with new tyres from all the new vans getting alloys.. first set with 4 new hankooks was £100, last set was £240 delivered with bridgestones on brand new rims.. fit more alloys i say, more deals for me.. 😎😎 With my matching new tyres, its always runs straight and true..
@Harty.1
2 ай бұрын
Well done Nathan . Your nearly the then bud with all the stuff we don’t like paying for , your be back on the mods we don’t mind paint for soon , the nice bits , no oily bits involved . Be glad when I get to that stage , keeps it up bud ❤
@MalteseMafia
2 ай бұрын
Great video 👍 no need for the shout outs my pleasure getting you the impact wrench. Ain't the same without the Skip Bangers. 😞
@Stillbusy105
10 күн бұрын
EBay Vw bearing puller is 45 quid on eBay & done 2 of my rears with this tool already
@clivewebster6576
2 ай бұрын
Nice one Nathan, literally about to do my front T5 bearings, so great timing. Hope to see you at the Caddy meet tom. Cheers Clive (Remapit)
@Weirdwebbie58
2 ай бұрын
Cracking video,you always make me chuckle 🤭 don’t stop waffling it adds to the entertainment,Ah yeah 🤙🏻
@ragnarironspear1791
2 ай бұрын
The van is looking feckin awesome 👍🏻
@YTDTETV
2 ай бұрын
Thanks Ragnar mate always appreciate your input 🙏👍
@algypan
2 ай бұрын
Love your videos and the enthusiasm. You have helped me do work on my T5 as a basic diy'er, so thank you! Where do you recommend for the tracking? I'm in Thanet area 🤙🤙
@ianwilcoxson1579
2 ай бұрын
Great video, I was waiting for you to spot the dust shield, we’ve all been there 😂
@jimmywilson6388
2 ай бұрын
Hi Nathan, Excellent channel. I have a 2008 1.9 T5. Converted it 13 years ago and still working on it as it's showing some rust round the edges. Your videos are giving me the inspiration to keep at it. Btw, what's your take on supermarket diesel especially from the big M one? Some U-tubers are telling some horror stories....e,g. Emergency Redex transfusions! JW
@marcb5328
2 ай бұрын
Nathan spot on as always , exhaust video will be a good one 👍
@Marvelwear
2 ай бұрын
Really good video, had to replace both my front hubs as rotted together to fit a vanslam kit ,had new bearings fitted 😊,anyway keep it up ,mines blown main fuel rail urgh.
@davidstocking1622
2 ай бұрын
Great job Nath. You do make it look easy and I know, it's not doing those bearings.... mint using the press... the special tool works without taking everything apart. I didn't have a press, so I bought the tool.... won't need it for another 100,0000+ miles though😂 looking forward to the worst mod
@YTDTETV
2 ай бұрын
Hey David thank you mate 👍 anything is easy once you’ve done it a few times, like I mention in the video if someone is tackling it for the first time there’s won’t come apart as easy as mine but it’s not to difficult 👍. I did look at the tools on eBay but I’ve always used a press so just went with it. Thanks bud
@archiebaldock5488
2 ай бұрын
As always another cracking job Nathan 👏👍👌
@vwtransportersandmotorcycl3729
2 ай бұрын
Top job mate, the T5 will be like a new van soon! Gutted you ain’t doing the intro dance though 😂. How do we get hold of a DTE sticker?
@wandango5913
2 ай бұрын
Great video Nathan, have you got a close up pic of the modified M10 bolt that you use to split the hub from the shock please, I’ve bought the ‘proper’ ones on the 1/2 drive socket and they are rubbish, thanks
@RichardStefanits
2 ай бұрын
I'll do the rears on mine soon. I'll get the tool though, I don't have any friends with massive press nearby, and apparently the part of the tool that gets between the bearing and the mount surface is needed anyway. I have a CR 2.0 TDI and it does not have a back silencer and the exhaust system is stock, it only has the middle box. Even if I remove the middle one, the exhaust sounds the same. Maybe the turbo and the DPF in mine is enough to make it very quiet.
@christinamacintyre9972
2 ай бұрын
Great video Nathan
@user-fb5nb4vo3y
2 ай бұрын
Your in Kent Nathan sprayed my van, great video
@mikesloper2000
2 ай бұрын
The special tool to remove the bearing is like £40 on ebay.
@YTDTETV
2 ай бұрын
Hey Mike I looked after mentioning and your right they are cheap 👍
@forddoctorforddoctor5918
2 ай бұрын
🤞🏻🤞🏻front to back works🤞🏻🤞🏻
@washshine3045
2 ай бұрын
Bit more love on the v dub
@YTDTETV
2 ай бұрын
Ah yeah thanks mate 👍
@darranbond3448
2 ай бұрын
good man love the pup not 2 good at min
@smurfi99
2 ай бұрын
Nath great work!! My ball joints are knocking have you changed yours? What make have you fitted please. Interesting to see and hear the exhaust next time round.
@YTDTETV
2 ай бұрын
Hi bud thank you appreciate that 👍 I havnt replaced mine yet they are still tight. I have seen a lot of people use MAHLE balljoints and say they are good. I’ve seen them on eBay 👍
@billsheehy1660
2 ай бұрын
More great content, Thank You
@YTDTETV
2 ай бұрын
Thanks bill mate 🙏👍
@simonmbaker
2 ай бұрын
Lets go....💪🤙ah yeah
@YTDTETV
2 ай бұрын
Thanks simon 👍
@ak-mo9vo
2 ай бұрын
Looking sweet 🤙
@francishagen8508
2 ай бұрын
Takk!
@YTDTETV
2 ай бұрын
Thank you Francis ❤️👍
@johnshaw4140
2 ай бұрын
Do love a transporter but wish I had an old LT from the 80's , hey ho . I straight piped my Chevy G30 , don't half make a nice rumble now , Ah Yeah
@YTDTETV
2 ай бұрын
Hey John my mate had a LT Vw van and he said it absolutely ripped for a van, very nice 👌 👍
@petehancock1057
2 ай бұрын
Quality video how to do it properly. I bought the tool got out the bearing out and replaced, knackered the tool and sent it back for a full refund. What sort of press would us diyers need to avoid the poor quality tool. I think your mates are a bit better geared up than mine 😂😂
@jimstar7692
2 ай бұрын
Can you not sound deaden the front arch’s if you have any left over from the interior, if it’s just tyre noise you can hear
@YTDTETV
2 ай бұрын
Hey jimbo that’s a very good idea I do still have some I shal do that mate 🙏👍👍
@peerless67
2 ай бұрын
Ah yeah
@scottsvxr
2 ай бұрын
😎👍👌
@ChrisJohnson-us7ii
2 ай бұрын
Seems quiet on the video, Have you checked door seals and doors are aligned?
@YTDTETV
2 ай бұрын
Thanks for the feedback Chris, it does need new door seals so I do need to fit some new ones 👍
@glenkellaway4664
2 ай бұрын
What engine and gearbox in that touran nath
@YTDTETV
2 ай бұрын
Hey glen it’s a 1.9 TDI BJB and a 6 speed 👍
@glenkellaway4664
2 ай бұрын
@@YTDTETV u selling
@Lewis-jj4kh
2 ай бұрын
Just tipex the subframe before taking off ahh yeah👌
@YTDTETV
2 ай бұрын
I thought of using spray paint somewhere but didn’t think of tipex will remember that thanks mate 👍
@Lewis-jj4kh
2 ай бұрын
Fairplay mate you have 2 awesome vans there great content buddy👍
@kellytaylor3134
2 ай бұрын
Ha i use those exhaust hangers for the exact same thing great minds think alike see 😅
@YTDTETV
2 ай бұрын
Ah that’s brilliant 👍 I normally have loads but when I need them I could t find any. They have many uses 😊
@kellytaylor3134
2 ай бұрын
@YTDTETV I hang them on the wall near my torches so I know where they are 😉
Пікірлер: 60