Great video from people who ACTUALLY KNOW what they are talking about!
@slojam100
2 жыл бұрын
Josh fitted my B14's last December Absolute Brilliant. Thanks THQ 👌
@THQAutomotive
2 жыл бұрын
Glad you're pleased with them. Thanks for your comment 😊
@jameshosking9233
Жыл бұрын
Had a lightbulb moment on tyres watching this. Running 275’s was a fail on my part. Will be switching to 265’s - this will hopefully solve the slight ‘rub’ I’m experiencing on a B14 Komfort set-up on full front steering lock, or when bottoming out on a compression on the road (again in the front). Also need to check if the longer drop links were fitted on my 6.1. I learned a lot watching this - thanks chaps.
@THQAutomotive
Жыл бұрын
Glad to be able to help :)
@MrC2958
Жыл бұрын
Was going to call you actually about a knocking noise. Brought my T6.1 2023 California down to you earlier this year for suspension and wheels. Its developed slight knock on the left side. I'll get the dealer to check the drop links
@kristiancdf
2 жыл бұрын
Thanks. Gives me so ideas as to why I’m getting knocks on my front end having refitted my struts. 👍🏻
@THQAutomotive
2 жыл бұрын
Glad to help, that exactly why we did this video :)
@00pturnerj
Жыл бұрын
Glad I watched this. Replacing a set of leaking KWs on my T5.1. Ordered a set of B14 komfort lows and wasn’t aware of the need for the dust covers! They didn’t come with so have just ordered a set.
@THQAutomotive
Жыл бұрын
Yes they're very important
@peterwilding9744
2 жыл бұрын
Yet again a very good video showing how to fit suspension And some of the faults You can come up against 👍👍👍👍👍👍👌👌👌👌👌
@THQAutomotive
2 жыл бұрын
Thanks Peter 😊
@andygta
2 жыл бұрын
Great video chaps. Had no idea about having the spring text facing forward!
@THQAutomotive
2 жыл бұрын
Glad it was useful.
@mkerr8790
Жыл бұрын
@@THQAutomotive Question: Spring Text facing forward on front & rear springs??
@THQAutomotive
Жыл бұрын
@@mkerr8790 Fronts. More facing out than forward :)
@mkerr8790
Жыл бұрын
Thanks guys And regarding the rear springs… which way should the text face??
@THQAutomotive
Жыл бұрын
It can only fit one way because of the shape. It'll make sense when you are fitting them
@twig3288
7 ай бұрын
Why would anyone lower their ground clearance bearing in mind the condition of British roads, with speed bumps, potholes and flooding?
@THQAutomotive
7 ай бұрын
Because they are so much more comfortable when lowered correctly.
@vitobelas3699
Ай бұрын
It looks better. Why people still questioning it?
@babelonchabalala1690
9 ай бұрын
Had a T5 with a knocking sound when turning the steering ...... Noticed under the wipers that the shock wasn't centered in the gap and knocked against the chassis...... Turned out to be a worn stabilizer link that caused the shock absorber not to stay centered while turning the steering wheel .....unfortunately the T5 does not have nuts on top like normal cars that holds the shock in place
@keanMechanic
Жыл бұрын
And don’t forget to follow the manufacturer instructions and renew ALL FIXINGS.
@468cotter
Жыл бұрын
Great help, thank you.
@THQAutomotive
Жыл бұрын
Glad to help 😊
@mikenefkens6626
Жыл бұрын
Thanks guys! Recently fitted the twin adjust low kit and have a knocking on the rear, new spring seats from you guys fitted. Bump stops cut down, spring seated correctly. Seems like maybe knocking from adjuster? I heard the spot welds can rattle against the collar. Not sure what else to look for.
@Penberth1
8 ай бұрын
Great vid for teaching the likes of myself about Transporter suspension! My 2011 T32 has developed a knocking on front driver side as of late - new d bushes on anti-roll bar, new track rod end, checked the top nut and tension OK.... but alas she still knocks when steering! Looking in wheel arch today with the other half steering I can see towards top of shock assembly it's not a smooth motion, it's a jump jump jump creating the knocking. Well out of my realm so it's off to the garage - but would you hazard a guess at what's up? Bit of corrosion in there but passed MOT like it in December.
@THQAutomotive
8 ай бұрын
So hard to say. What suspension are you on? If it's coilovers, the first thing I'd check is if the install fitted the OEM top nut. One of the solow approved installs would be able to diagnose it I'm sure. solowsuspension.com/solow-installer-network/
@slinkyboy777
2 жыл бұрын
Great video can you do a video on getting them safely up on a trolley jack. Had a look and can’t see much details on that as most people don’t have access to a ramp and these vans are heavy. Thanks
@THQAutomotive
2 жыл бұрын
We'll try and add that to a coming video
@colinhill6287
10 ай бұрын
Can I ask why the spring would be knocking if the writing isn’t facing forward?
@Georgegallowa7
3 ай бұрын
Great info bud,
@THQAutomotive
3 ай бұрын
Glad to help :)
@Georgegallowa7
3 ай бұрын
Can you lads do a job for my 2006 t5 130, all front bushes and rods re new and drive shafts and steering knuckle if needed. Iv got play and front knocking Cheers
@THQAutomotive
3 ай бұрын
@@Georgegallowa7 we don't do customer work sorry. We're fully development and distribution now
@s1_vbe
11 ай бұрын
Just bought the full so-low LOW kit etc with all the trimmings.. Are all ur installers around the country trained with the knowledge that u just all explained. I am going to take it to a&t motors in newbury. Thanks again
@THQAutomotive
11 ай бұрын
Hello.Yes all our installers have had to come to us for training before getting approved.
@s1_vbe
11 ай бұрын
@TransporterHQ thank you and cant wait for the delivery to turn up. Its not the airride I wanted but money is tight so go for the next best thing
@THQAutomotive
11 ай бұрын
100% :) @@s1_vbe
@melekbas4390
Ай бұрын
This guy is the yoda of Transporter suspension! 👍🏼✅
@lasersailing2k8
Жыл бұрын
Wish i was closer to you as have all sorts of knocking on the front end which is very frustrating…….. :(
@THQAutomotive
Жыл бұрын
maybe you could show this video to your local garage.
@colinhill6287
10 ай бұрын
Hi, bit late to the chat, but can you help. I noticed the numbers on the front springs, my komforts have 6/21 as the top number, what relevance is this please?
@s-om6962
Жыл бұрын
Ive a 2005 t5.4 mo...whats the cheapest 50mm.lift..EVERYTHING i need to do it..ie diff spacers...etc...anything else i need ?..eg.longer brake hoses? Have you a full video on this job please. Cheers..
@peterodriguez4642
Жыл бұрын
Top tech no frills info...
@THQAutomotive
Жыл бұрын
Glad it helps
@PatrickKoenig-lp2oz
3 ай бұрын
I’ve got a t6.1 4motion.. rides great on b14. Just fitted the rear poweflex bushes and putting it back together the rear left axle seems to be “stuck” hanging down.. it seems to have come out of the cv on the hub side no idea how get it back in.. don’t really want to open the boot 🤷🏼♂️🤦🏻♂️ anyone got any ideas lol
@binnydlean
Ай бұрын
The description of your video implies you’ll be discussing noises etc so we know what noise indicates what’s broken etc but there’s none of that in this video. You even say the same thing in the outro. It’s super helpful with insiders tips for what to do when fitting new coilovers etc but it’s not useful at all for fault diagnosing which I thought was the whole point to the video? 🤷🏻♂️
@THQAutomotive
Ай бұрын
Sorry, I can't really help you diagnose a noise. As long as you follow all these steps, you shouldn't have any.
@MarkIRE1
4 күн бұрын
If you have to go to KZitem to figure out how to find a knock in a car, you should be no where near it! 😂😂
@binnydlean
4 күн бұрын
@@MarkIRE1 Another d*** head keyboard warrior with nothing better to do. My comment was valid. The video implies fault diagnostic and there wasn’t any. Rather than spending hours looking for something that this video might have pointed me in the direction of straight away I thought this was a good place to start. But I’m glad you shared your thoughts, I was dying to know was you personally had to say. W**ker.
@iam_anderdingus
2 жыл бұрын
Helpful video - thanks. Can I do the rear spring adjuster delete on my STX coilovers? If so do you sell them and which one do I need please?
@THQAutomotive
2 жыл бұрын
Yes although I didn't know the internal dimension of the ST springs. The B14 adjuster delete on our website is the narrowest. That will be most likely be the best fit.
@mashlikethepotato
2 жыл бұрын
I cut the rear bump stop housing down as pointed out. I removed the rubber first which simply pushes into the housing. However, the housing (tube) was sleeved and seemed to be held by wax...?! After shortening the tube with a grinder, the sleeve wouldn't stay in place and therefore wouldn't hold the rubber bumper... This was 2 years ago now but I think I have explained it right. Any advice?
@mashlikethepotato
2 жыл бұрын
2007 T5 btw (Resist the lift 🤟)
@THQAutomotive
2 жыл бұрын
You don't need the rubber bumper. Just remove it.
@mashlikethepotato
2 жыл бұрын
@@THQAutomotive I grip filled the shit out of it 🤣
@THQAutomotive
2 жыл бұрын
@@mashlikethepotato 😂 💪
@MAXlMUS
Жыл бұрын
Nice vid guys. Do you have your service stations in europe? Or do you recommend anyone for this kind of suspension work? In particular: Poland, Germany. Thanks!
@THQAutomotive
Жыл бұрын
Speak to Stefan at a company called Felgen doc in Germany
@carlgrove7414
Жыл бұрын
Very useful video. Thanks. I have a set of 20” Navis twin 5’s. What size tyre would you recommend as the most comfortable tyre on a T28?
@KeviNissan
5 ай бұрын
Depending of the width of the rim. 8,5J need a smaller tyre than a 10J for example. For 8,5 is the recommendation between 235 and 255 so for the best is 245.
@alistairgrice660
2 жыл бұрын
May I ask what was the wheel and tyre size on the van on the hoist?
@vwjoshua
2 жыл бұрын
If your meaning the tyre size at the end of the video. That is a 235/55/17 general grabber, if my memory serves me right
@MrMilky1190
Жыл бұрын
Great video. I have 275 on my t6.1 on adjustable coil overs. When Reversing up a slight incline my transporter grinds to a sudden halt. If I go really slow I get no issue. I cannot see that the tyre has caught anything. It sounds like I’ve hit something but I haven’t. The front hasn’t ground out etc. Any ideas?
@THQAutomotive
Жыл бұрын
Are you getting warnings on the dash? It won't be tyres.
@TheMt9398
Жыл бұрын
Hello, thanks for your video. Can I ask please where you are located? I have a t6 which shakes and bumpy drive. best Mo
@THQAutomotive
Жыл бұрын
Google Transporter HQ and you'll see our full address :)
@susan5530
Жыл бұрын
Hi I replaced my rear broken lowering springs with stance + & adjusters. T5.1 now going over a small bump there's a hard knock. Been told there not compatible with standard shocks. Do you think this is the problem?
@THQAutomotive
Жыл бұрын
yes thats correct. the standard shock will be bottoming out.
@tonyormsby1409
Жыл бұрын
Ref: 'Bilstein B14 Komfort with Eibach Pro Lowering Springs' on a 6.1 California. Please can you advise how much threaded adjustment you get on the Rear Adjusters ~40mm or more? I think there is nearer ~ 70mm on the front, but it is the rear where it's needed as Californias are much heavier than standard Vans or Kombis and typically have ~40mm of rear sag! Bilstein quotes typical lowering of 30 - 50mm and others quote 50 - 70mm. Aware that the shorter spring accounts for ~ 30mm, although stiffer. Many thanks.
@tonyormsby1409
Жыл бұрын
Sorry, meant to add I wish to keep the max height at the rear (for extra load of a Camper and associated kit) and lower the front to level accordingly.
@THQAutomotive
Жыл бұрын
There isn't an exact calculation as all vehicles are different especially when loaded. We see vehicles a lot heavier then a Cali so they are ideal for those too. I'd genuinely set the rear 20mm higher then the front on the adjust to allow for weight. So set the rear at the highest and adjust the front down 20mm on the adjuster. It's trail and root though. You may need a few attempts to get it right. The front is easier to adjust so I'd set the rear high. You can then easily tweak the front
@tonyormsby1409
Жыл бұрын
@@THQAutomotive Thanks. Wondered if you could advise the exact amount of thread on the Rear adjusters, for the max setting?
@stoem
Жыл бұрын
Do you have to modify the LED brackets/sensors at all when going low to make sure the headlights are still correct or does it work at any ride height?
@THQAutomotive
Жыл бұрын
We've not no. I don't have any issues with my factory LED headlights and i roll really low on Solow Air suspension
@matthewlaw8268
Жыл бұрын
Will a 265/40 tyre fit on a 10j rim? I have staggered alloys on my van with 275/40 tyres fitted and was told 275 is as narrow as you should go on a 10j rim.
@THQAutomotive
Жыл бұрын
265/40 is fine on a 10 wide wheel. It'll just have more stretch. To give you an idea, I run a 255/35 on a 10.5 rear on my own van on air suspension.
@adrianquinn5535
2 жыл бұрын
Are the twin adjust projekt dampers the same as the b14s on a 4motion with the bushing offset? Have a set on the way from the shop in the Netherlands atm!
@THQAutomotive
2 жыл бұрын
No, only lift dampers are offset
@markmclean4897
Жыл бұрын
Got knocks thanks
@THQAutomotive
Жыл бұрын
Hope this helps
@gandhi1078
Жыл бұрын
Do you take the top rubber out on the rear spring? I’ve bought your updated lower rubber but still got an annoying creaking when I brake so thinking it’s the top rubber.
@THQAutomotive
Жыл бұрын
If you have adjustable suspension, yes you remove the top rubber plate. If you have just springs with no adjuster, you need a top rubber though. Some of our spring only sets come with a replacement to the EOM one.
@gandhi1078
Жыл бұрын
@@THQAutomotive great cheers for the reply. I’ve got coilovers, I might buy your adjuster delete 👍🏻
@chrisandlauraritchie7998
2 жыл бұрын
Are you able to get the bolts that go in the front hubs?
@vwjoshua
Жыл бұрын
If you contact a vw parts department at your local dealer they a purchasable or alternatively speak to TPS as they stock VW parts too
@maro255i
Ай бұрын
how much torque for droplinks nuts?
@THQAutomotive
Ай бұрын
60NM with a 45 degree tune afterwards
@maro255i
Ай бұрын
@@THQAutomotive is this enough with red loctite to not get knock sound from links? i have them knocking agter mounting VB air suspension
@THQAutomotive
Ай бұрын
@@maro255i That is the correct amount. I'm not familiar with VB air though I'm afraid.
@stephencharlton9823
2 жыл бұрын
Which wheels are they at 3:54?
@vwjoshua
Жыл бұрын
They are Black Rhino Arsenal 17x8
@HorsleyLandy88
10 ай бұрын
Why are you using a toy blowlamp ?
@THQAutomotive
9 ай бұрын
Because it does the job and we use it once in a blue moon.
Пікірлер: 96