Please tell me how do i fix that button on the lid when i manually lower the display it works fine the button under screen display but when i want to open the lid button does not react
@lifeworthwhile2523
2 жыл бұрын
It normally happens under two conditions. 1. You left your car under the heat of the sun for too long. 2. You installed/programmed/extended a software in the command screen to either accomodate more frequencies or play videos. The only remedy that works for me when this comes up again is that, ill turn it off, then I have to drive the car for atleast 5mins then switch it on again. If it persists, then restart (on/off) like 10times.
@darrenflett7373
Жыл бұрын
Mate, you're wrong.....if it's happening to you then your screen is at fault and is 100% on it's way out. It started off with me the same way that you are sseing,it will get progressivly worse to the point you see in the video. 2nd hand unit of ebay resolved mine,just match the numbers up and you wont need coding,straight swap. The screen has a timer and potentiometer to measure the distance between open and closed,something goes wrong on the screen board and messes the signal between the two. Most likey a part that costs a couple of quid but can you buy them separate,can you f***, typical mercedes. Anyway,mine works as normal now,just hope yours isnt heading thr same way buddy,goodluck
@douglasoliveira4716
7 ай бұрын
Qual modelo da w204 vem esse radio ?
@BC2FITTY
2 жыл бұрын
By any chance have you tried disconnecting the battery ? Or maybe something flew to the back and is stopping it I know Mercedes puts a lot of safety features to prevent damage
@darrenflett7373
2 жыл бұрын
Its none of those things
@augustodeoliveira5825
3 жыл бұрын
How do you fix it
@darrenflett7373
3 жыл бұрын
I have never fixed it,have you
@SuperCollince
3 жыл бұрын
Any help out here. I have the same problem
@darrenflett7373
3 жыл бұрын
Mine still is the same, did you fix yours
@Simonsenna67
Жыл бұрын
Hello Did you ever fix this??
@TV-gt5mp
Жыл бұрын
i find that!!!!!! cable cut
@mohamedsalem609
3 жыл бұрын
I have the same problem, Did you know how to fix it ?
@darrenflett7373
3 жыл бұрын
I never fixed it, did you ? Mine still not working
@darrenflett7373
3 жыл бұрын
Well ? Any fix
@kejsis
Жыл бұрын
Did anyone fix it? 🙂
@user-lq4dc3es8x
Жыл бұрын
How did u fix it bro?
@jujujaja3297
4 жыл бұрын
i’m also having the same problem. mine had this problem after a car wash.
@blacksam424
4 жыл бұрын
Did you figure out the problem?
@darrenflett7373
3 жыл бұрын
I didnt and still keen ro know how to. So many videos but no fix, youd think people would share
@blacksam424
3 жыл бұрын
@darren flett I pulled the monitor and held the unit in my hands. It worked fine. I put it back in and it did the same thing again. I’m going to pull it again this weekend if I have time and take a look at the harness.
@darrenflett7373
3 жыл бұрын
@@blacksam424 i have mine out so many times i just given up. Dont know how good you are with a volt meter but at the power plug at the rear of the display unit i have power going to earth, dont know if this is the cause or if its meant to be a switich earth. Mercedes STAR says "obstruction" but i know there is no obstruction as i've had it in bits. I thinking its high resistence due to a poorly seated connection or plug, maybe in the from SAM or canbus but im damned if i can find it
Пікірлер: 31