I installed a new on on my Mercedes but the light is still on. What can I do to clear it?? now the lights function normal now but no luck on dash light turning off. Any ideas??
@chouher222
3 ай бұрын
I replaced the sensor, but could not clear the sensor. I took my car to auto shop, the mechanic couldn’t detect it with his high tech OBD either. The message is still there and both left & right beams are still dead. All fuses are still good. I called another auto shop specialized in European cars, but they said they don’t have the tool for it. How did you clear it with your OBD? Did it detect the message error? I need help. I’m trying to avoid a trip to the dealership. Thank you.
@rubrub9609
12 күн бұрын
My dad has a 2013 SL 550 will this fix still work for it?
@jn11901
8 ай бұрын
I'm having trouble putting it back what little switch did you have to move?
@UrielArtsGarage
7 ай бұрын
There are clips on the sides you need to press
@rpascua5195
2 жыл бұрын
Did you have to calibrate it after replacement?
@UrielArtsGarage
2 жыл бұрын
it was just a plug and play!
@rpascua5195
2 жыл бұрын
Thanks
@UrielArtsGarage
2 жыл бұрын
@@rpascua5195 what you can do is wait a few hours and the ecu will reset when it goes into sleep mode after installing it
@cliftonbailey1331
Жыл бұрын
Everything works but still getting error message
@aligatorualigatoru7116
Жыл бұрын
@@cliftonbailey1331you must erase The code whit a obd or diagnostic valise
@DP-fw3dx
5 ай бұрын
Did you see him press OK to clear the msg? He was poised with his finger and cleared the msg as soon as it was displayed. The car does not throw a code for this problem. You have to go to the stealership to clear the msg.
@epibarron5290
Жыл бұрын
Does this also affect the turn signals not coming on. To turn they dont work but once i hit the hazards they all work.
@UrielArtsGarage
Жыл бұрын
you might want to check the fuse or any electrical wiring because that's most likely the case. both should not impact each-other unless there's something fishy is going on! cheers!
@epibarron5290
Жыл бұрын
@UrielArtsGarage thank you for replying, And I checked all the fuses, but will go back and double check. This started right after a heavy rain storm and the lights came on them selfs, the horn starting going off and windshield wipers turned on them self to. Disconnected battery till the storm went away. Then the auto lamp message came on
@UrielArtsGarage
Жыл бұрын
@@epibarron5290 sounds like water has definitely got into some electrics! I highly recommend taking it to trusted shop! I have a feeling that the comfort module which is located under the carpet has been compromised with water! if you have a sunroof i highly recommend getting the drains cleared as it's the number one cause for water getting into the cabin!
@scoop973
Жыл бұрын
Did your sunroof and dome lights stop working too?
@UrielArtsGarage
Жыл бұрын
check your fuses first! the comfort module is located under the carpet so I would highly check for any wetness in the driver side area! causes can be clogged sunroof drains! goodluck!
@scoop973
Жыл бұрын
@@UrielArtsGarage how do I program the part to my car?
@UrielArtsGarage
Жыл бұрын
@@scoop973 there are many guidelines on how to program the sunroof however if all of these parts went bad at the same time, you maybe facing a bigger electrical issue! make sure the comfort module is dry and is free from any corrosion before replacing all the parts that stopped working!
@trongtanle1879
6 ай бұрын
Hey i have mercedes w212 with fault code the output for standing light 1 has a malfunction the component is not configured. But when im turn on IG, dayrunning light work and turn off immediately after. Guy help me pls.
@onefishingfreak
8 ай бұрын
My buddy just changed his sensor but it still doesnt work and he still getting the warning on his dash
@UrielArtsGarage
7 ай бұрын
Did you erase the code from a scanner? You might have to do that
@diegomerino1679
10 ай бұрын
I got the 2008 is different model of sensor ?
@UrielArtsGarage
10 ай бұрын
All the same throughout the years the w204 was manufactured so from 2007-2014
@SpeedyDacoit
Жыл бұрын
For me it says I need to calibrate the sensor and only the auto wipers work, the lights stay on all the time
@UrielArtsGarage
Жыл бұрын
have you tried erasing the stored codes with a scanner? you can get a cheap one for $20 at walmart and return it after if you don't plan on keeping it!
@SpeedyDacoit
Жыл бұрын
@@UrielArtsGarageI do have a scanner that’s Bluetooth that didn’t seem to pick up any code for it. Although maybe the Walmart one would work. What year Mercedes is yours in the video? Just curious since mines a 2008
@UrielArtsGarage
Жыл бұрын
@@SpeedyDacoit mines an 08! mine doesn't show any error codes but erasing using the obd reader even without codes worked for me!
@SpeedyDacoit
Жыл бұрын
@@UrielArtsGarage oh okay, my original sensor doesn’t have any issues and it still functions but I think the sensor is way too sensitive(it turns on before most if not all cars on the road) and I have a feeling my sensor is going bad but I’m not fully sure, that’s why I wanted to try out a new sensor to see if it made a difference
@UrielArtsGarage
Жыл бұрын
@@SpeedyDacoit same here! mine is a tad bit sensitive as well but I've been leaving it as is until the error pops up again! goodluck!
@ThegreatBoso
Жыл бұрын
Thank you
@UrielArtsGarage
Жыл бұрын
Welcome!
@63majorka
Жыл бұрын
🙏🏻❤️
@ChristinaMaynard-w2m
28 күн бұрын
Hershel Turnpike
@stretch5832
8 ай бұрын
L O L just use that rag and cover up the daylight sensor right there in the middle of your dash
@UrielArtsGarage
8 ай бұрын
Big brain moves 😂😂 honestly I tried this a couple of times and it doesn’t work 😂
@michoacanohh2227
Жыл бұрын
09 c300. Left low beam is driving me nuts. It turns on and turns of and on every couple seconds. Untill it doesnt turn on at all. Auto lap function warning on. Check left low beam on. Left parking lamp on. Front right sidemarker lamp warning on also.
@UrielArtsGarage
Жыл бұрын
the safest bet would be to replace your auto lamp sensor and see how it goes first
@vrkelbycobra1452
10 ай бұрын
Mercedes is weird and annoying. I had that issue and i had to replace my wiring harness due to corrosion. My left turn signal on my headlights only works for 10 seconds then turns off. So it’s cuts off when it gets hot
Пікірлер: 49