flannel daddy and negative daddy both upload on the same day? Looks like the toilet is gonna be occupied for a while
@84NZ41
3 жыл бұрын
dude, i mixed them up and sat on the shitter during negative and wanked during flannel daddy... omg my life is upside down rn!
@michaelbirchall2247
3 жыл бұрын
Are you talking about Garand Thumb?
@84NZ41
3 жыл бұрын
@@michaelbirchall2247 yeah 😁
@generalcorrosive
3 жыл бұрын
Genuinely taking a shit as I watch this right now!
@isaacshively6705
3 жыл бұрын
The real flannel daddy is T.Rex
@DgR1716
3 жыл бұрын
Legendary content right there,and at 42 mins of it,merry f’in Christmas 🎄💪🏼
@R_EvolutionJB
3 жыл бұрын
My first legit aeg was a p90, I did not expect you to pull one out and shove that motor in there. I was happy, nostalgic, and overall just happy my fave aeg got some love
@A-G-F-
Жыл бұрын
Things i have learned from watching resourceful, good techs is that: - R-Hop almost never works - Expensive hop up units and barrels almost always are snake oil and the stock ones perform better
@fjjwfp7819
5 ай бұрын
Always wondered why anyone considers using a random piece of rubber they found somewhere and glueing it to their barrel would perform any better than a real hop rubber designed and engineered to produce consistent friction properties across a range of temperatures and velocities
@TheRealDealAirsoft
3 жыл бұрын
Yo negative airsoft I genuinely watch your videos for entertainment when I’m not looking for tech videos. Like when I’m eating cereal you already know I’m watching negative
@sike3000
3 жыл бұрын
a 42 minute video! Barry get the lube!
@killamac10100
3 жыл бұрын
American negative airsoft sounded amazing! A whole episode like that would probably fuck your throat though. It was still a great impression!!!
@maverickentity9341
3 жыл бұрын
Two part comment, mostly my own personal rants but this vid gives me an outlet for it. I agree on how insane the prices for externals versus what you get on the inside are for most of our "vaunted" brands in the community. Take LCT for example. I have a RPK by them, and it has been a lemon since I got it years ago. Stripped Allen screws holding the barrel by default, Allen screws all over the gearbox shell (most which have stripped over the times I've had it apart). The nozzle does nothing for airseal, yet LCT got it in their minds to make it longer than aftermarket ak short nozzles but also shorter than the long nozzles. Few folks say "you just gotta shave the tappet plate with a short one or grind down the nozzle" but that should not be the case for such an expensive replica. One should be able to use aftermarket parts without fear of proprietary issues for models that take your standard v2 or v3. Meanwhile my decade old dboys gearbox shells and bodies, my newer Cyma 40d ak105 all take everything just fine. Onto the p90 and motor testing bit. Have to say, as someone who wasted far too much money rebuilding a tm p90's gearbox from the grave, giving it a mtrigger with a gate nanohard mosfet, my usual 12 or 13:1 gears and zci 22 tpa high torque motor combo, etc., that motor you put in alone made that chicom p90 sound better with the trigger than all my effort combined. Does not help that my work was in vain because for some god forsaken reason I cannot get the trigger to function properly no matter what I do. I have gotten to the point where I just do not care for new releases or to even buy another replica. I am so sick of internals not being passable or rectifiable by my hands alone. If a company out there started selling full external ak model kits without any allen screws, without any proprietary bullshit, and without costing a kidney, I would be their happiest customer.
@uazfoursixnine
3 жыл бұрын
Damn; the G28 has some really bad internals. But the motor is something else. Like you said; an exelent option if you want to upgrade the performance by swapping only one part. Great video... and a happy, productive and fun new year!
@TheRealDealAirsoft
3 жыл бұрын
God bless you for taking that job with that gearbox
@khost9442
3 жыл бұрын
Another wonderful video. Can't wait for part 3.
@hawaiiairsoft8087
3 жыл бұрын
Aloha Negative Airsoft, great morals! Love your videos. 🌴😎🤙
@setsuna200
3 жыл бұрын
Love the rail covers on the Knights armament ar.
@zack8690
3 жыл бұрын
finally another video! and its a longer 1 too! good shit
@c_m.f8164
3 жыл бұрын
I like you're m4 it looks nice and clean with the knights armament rail.
@tradesmith_yt
3 жыл бұрын
The fact he didn’t have you paint match that upper hurts my heart bucko!
@mRnIcO-ro7nw
3 жыл бұрын
Underrated channel
@Draken428
3 жыл бұрын
Hell yea man, bodycount kicks ass
@DonCarlione973
5 ай бұрын
Lmao, yo this guy is funny AF! I Love how brutally honest he is. And that "la la la la" miniclip for the motor testing had me rolling! 😂 His choice of music is perfect for this type of shit too 🤙🏼
@IratusSerpentus
3 жыл бұрын
That scream is the best thing to ever happen on this channel
@enidpuceflange
3 жыл бұрын
Love the look of that G28, I like my sh*t to come in different shades of doo-doo
@sethmorton6372
3 жыл бұрын
Been waiting for this
@wishdeus
3 жыл бұрын
Damn that motor is smarter than a vfc MOSFET
@mynx_uk
3 жыл бұрын
fantastic. and i cannot believe i am saying this, but i need to get hold of an L1A1, wit, its not for airsoft, its for historical reenactment. have an epic new year.
@angelretribution
3 жыл бұрын
Love your videos 👍 question for you- what do you think is the best widely available smg currently? I want something with good externals and decent Internals so I can upgrade it without dealing with the bs 😂
@jackrodriguez438
3 жыл бұрын
That motor is insane, it made standard cheapos sound like DOG'S, i bet its better than most and will last longer too
@matthewirvine1361
3 жыл бұрын
Having never seen one if your videos, I don't know whether to laugh or cry. I don't think I've ever heard someone sound so angry in the first 5 minutes of a video
@WolfMan-nf4lv
3 жыл бұрын
@33:37 “hoo-hoo-hoo-hoooooo! Fuck me, said tigger” legendary 😂🙏🏻🙏🏻🙏🏻🙏🏻
@isaacshively6705
3 жыл бұрын
For those wondering the Warhead motors are gonna be $130 US and they have a retailer in Silicon Valley California
@whitmills6691
3 жыл бұрын
Also one of them is a FUCKING 48K!!!! If it’s torquey enough I’ll throw one in my 10:1 DSG and have a ~150 RPS gun
@alz9326
3 жыл бұрын
@@whitmills6691 uh no full auto in buildings maybe?
@whitmills6691
3 жыл бұрын
@@alz9326 don’t worry, full auto is reserved for rentals only
@alz9326
3 жыл бұрын
@@whitmills6691 ih yeah fs fs
@rogerborg
3 жыл бұрын
Jesus, stress testing that P90 could have ended in disaster if any of the magic smoke had got in your wine. Oh, and the perfect "mortor" (sic) to go with one of those budget Galaxy-rebranded MP5Ks is a budget Big Dragon M140 High Torque, which cost me all of $28.67 delivered to the UK from AliExpress. Still got that wank V3 trigger, but otherwise so much fun in CQB, as a sniper-sidearm, or even a woodland primary, although in that last case you HAVE to dual wield them.
@jimbojimb360
3 жыл бұрын
RIP ASG Lipo. We barely knew thee.
@davidking6594
3 жыл бұрын
“Dump valve wanker” 😂😂😂😂 stitches
@Koscum
3 жыл бұрын
@Negative Airsoft: Have you considered using variable length nozzle on that HK 417 and fine-tuning it to avoid possible airseal issues between the nozzle and the hop-up rubber? Yeah, I know that variable length nozzles are considered as heresy by some, but I've had one lemon where I had to use 21.45 to get decent seal (it would perform like on both 21.4 and 21.5), so having one on standby just to get things to run properly was pretty useful.. Back on the topic of brushless motors, if you ever get the chance to test one out, would you care to do some kind of honest opinion comparison between Warhead and Option No. 1. I got one ONO last week and it's been performing quite well so far, but since importing airsoft gear is a bit..... difficult to say the least down here, I'd like hear someone else's thoughts about them before I can make reasonable recommendations to others.
@xtairsoft
3 жыл бұрын
Check out Warheads FB page, they are looking for a customer to compare with Option 1 or something like that
@jackpenn2956
3 жыл бұрын
I saw that Mp5 in the flesh. It's was fucking mental and cool as...
3 жыл бұрын
Blue polymer hop chamber looks like an SHS. Nicest chambers out there for less than 10€.
@xtairsoft
3 жыл бұрын
Has a molded nub on hop arm though :-(
3 жыл бұрын
@@xtairsoft That's an easy fix if you don't like the concave spacer. Not ideal, not a deal breaker either.
@castaway__7235
3 жыл бұрын
MEGA DRIVE ACID SPIT!! also why don't you like rhop? what option besides rhop is viable for you
@RealSaltygrease
3 жыл бұрын
16:07 nearly spat out my drink laughing here
@isaacshively6705
3 жыл бұрын
What do you know a broken tappet in a VFC, strange
@SiliconeSword
3 жыл бұрын
Have you tried a heavier piston? I have a very reputable friend who has a weighted piston in his DMRs and it boosts power with heavier BBs. I am not bullshitting you, the heavier piston reduces the power spike so less of it gets sprayed out of the hop unit. Also, is there a chance that the cylinder had a larger ID or some shit???
@nikloskoda3184
3 жыл бұрын
Have a 417 DMR with a retro arms v2.2 setup at 160m/s and maple Leaf works like a clock!
@kalm1531
3 жыл бұрын
Nice motor.
@minhthinhhuynhle9103
3 жыл бұрын
8:48 The tappet plate flag breaks because you release the Spring while the gearbox is in Phase 3 (Piston has moved to the further back & nozzle has been released) :)))
@messedupbro
3 жыл бұрын
i have a Q: how do it fare against the old systema magmum motor? massive thank you for your videos from sthlm sweden
@Josh-ev2xj
3 жыл бұрын
This man is the Gordon Ramsy of airsoft ngl
@haissake
3 жыл бұрын
I missed some good LMGs in these tests, it could be an awesome motor on a support gun, or maybe too wanker?
@zebadee277
3 жыл бұрын
well that gives me an idea for my P90
@epicslap387
3 жыл бұрын
Did you radius the gearbox? It will help reduce the risk of cracking the front of the gearbox
@romeowhiskey2759
3 жыл бұрын
Yes! the RCP90. Do you have one with that same colour scheme from Goldeneye?
@antthaknee4290
3 жыл бұрын
I have one of these and it was pretty shit in terms of power. Dropped an f2 in it and it’s amazing now.
@tizthegrizz9143
3 жыл бұрын
New g28 !! Hope it's cheaper than the vfc who is making it and will they be making a gbb version??
@JoeMaxFpv
3 жыл бұрын
There’s no way you will heat up a brushless motor without ant heavy load. I used to run heavy motors on drones on 6s lipos and never get hot unless pid tuning was too aggressive.
@kenba96
3 жыл бұрын
those motorsare realy interesting
@setsuna200
3 жыл бұрын
Go glad the US Army made the colors uniform for the M110A1. That mustard color is gone from the receiver. The M110A1 is a G28 with a mlok handguard with rail segments, a mlok bipod attachment, canted iron sights, a 1-8x short dot scope, and a qd suppressor. So basically everything you need. Only problem. Proprietary mags. This is why the Marine Corps and US Navy are still sticking with the SR25/MK11.
@leighaplin6127
3 жыл бұрын
looking forward to the short version tests. Get one in an AK74u.
@ShardHomeChem
3 жыл бұрын
May have said this in the video, but any idea when the motors are going public? Can’t find anything on the warhead website
@WailfulAMVCarp
3 жыл бұрын
Could you use micro switch with it and how fast is it not to be able to keep up with gate titan . The p90 test and results where shocking
@TheLobesrm
3 жыл бұрын
watchu think about ICS, overall
@someonesuperrandom4194
3 жыл бұрын
Just out of curiosity, what don’t you like about r hop?
@AnthonyGonzalez-lw1ek
3 жыл бұрын
When you pulled out my P90 ! How would you mod it , if you had not have had that motor
@ArchieKeen1
3 жыл бұрын
This Chinese factory you mentioned, is it double bell?, I believe you said it’s alright
@Urban-Fox-Airsoft
3 жыл бұрын
I just won one in a competition. Happy days 👍
@andrew7949
3 жыл бұрын
Maybe I'm just dumb and oblivious, but how is the torque measured with these motors and how does it relate to brushed motor TPA?
@spinxtercell
3 жыл бұрын
My XCR and Scar both had problems. But my Bronze 416 still hasn't had any problems yet. Probably my most reliable AEG, and I paid $250 for it. VFC can still be shit tho, just look at my Scar-L
@rossco9132
3 жыл бұрын
Can you check the dia. of the shaft support tower where it fits into the bottom hole in the gearbox, the ones I have are only 9mm and all other motors are 9.5mm and this makes the Warhead a very loose fit in the hole in the bottom of all my V2 gearboxes
@kwaaakity
3 жыл бұрын
might get one
@olliety
3 жыл бұрын
So are you saying that a fancy MOSFET with precocking etc is NOT compatible with one of these?
@jordancook5171
3 жыл бұрын
Doesn't retro arms make a gear box for this and the 417?
@cottonhill35
3 жыл бұрын
you should "test" it with 13.1 gears and a 11.1v itd sound wicked for a second or two
@mephiplays4637
3 жыл бұрын
I‘ve got a question to the warhead motor. I have a fairly stock Ares gearbox and I‘m using 3s Li-ions, will the standard version not blow up my gearbox?
@SupremacyDealer
3 жыл бұрын
It's been a wile since I heard the trololo song
@Lil_tweak
3 жыл бұрын
I fear no man but that thing it scares me
@davevoas4374
3 жыл бұрын
What are those rail covers on YOUR m4?
@someonesuperrandom4194
3 жыл бұрын
Vfc released a new avalon for 500. I’m ready for negative to tear into it.
@kevinstringer4276
3 жыл бұрын
Hi negative is there anytime you would recommend an r hop. I recently built a well type 96 fulled it up with action army parts and a lapped rhop’d barrel from red hornet. It fires ok not that I’m that experienced or have used it all that much. That being said my lad has a ssg24 and I think they are both pretty similar. I know rhop’s and novritsch ain’t your thing and you’re probably gunna call me a twat but then it’s nothing my wife doesn’t call me daily.
@boss-man4525
3 жыл бұрын
I had similar problem with my sr25
@perkyspewpews7302
3 жыл бұрын
*casually quaffing a nice red whilst burning out an AEG...*
@themeez1000
3 жыл бұрын
He's the Gordon Ramsay of airsoft.
@SharpShooter39
3 жыл бұрын
Ow god, hope the gearbox hold the power... mine broke after 500 shots. I have now a retro arms gearbox. 250mm 6.03 barrel. Stock hop chamber M150 spring 435fps (1.7 ish joule) on .2s hop of. Hop set for 0.4s it will joulecreep. Hop set and ith .4s it does 2.2 joule. I had 450fps with a cut m130 spring and 300mm 6.03 barrel. Dont have airseal problems like this one 🙈 love the externals. Fucking hate the stock internals...
@boom1925
2 жыл бұрын
You're like the Chef Ramsey of Airsoft.
@hampussundman5487
3 жыл бұрын
i just ordered 1 for 150 euros here in sweden i will come around march i will return when i get it
@henkjansma5529
3 жыл бұрын
What you think of krytac ?
@monsieurlunik5270
3 жыл бұрын
I'm putting this into my SVD !
@NegativeAirsoftTech
3 жыл бұрын
I'm going to be cutting one down & testing in an SVD... it's so fucking janky as standard.
@monsieurlunik5270
3 жыл бұрын
@@NegativeAirsoftTech especially the internal on the Cyma, but it’s better to destroy a cheap internal than an expensive Real Sword one
@AnthonyGonzalez-lw1ek
3 жыл бұрын
And to solve that trigger squish
@isaacshively6705
3 жыл бұрын
I've heard but don't know if it's true but I've heard longer barrels and full cylinders prefer wide bore barrels over tight bore and I only metion it because I know how wide bores work and it kind of makes sense, and I heard it from a tech at my local shop who's one of the people I trust for information on AEG's
@opairsoft8100
3 жыл бұрын
That’s completely misinformation. With longer barrels, you need more volume, with wide bores you are always losing volume. With 509+ mm barrels and full cylinders you are already very close to under voluming your gun (this is for aeg’s, gbbr/hpa can basically go to a barrel of infinity since no one really makes a barrel that would be so long that would be under voluming, along with the fact that it would be stupidly hard to play with)
@isaacshively6705
3 жыл бұрын
@@opairsoft8100 yeah but with a tight bore the bb is riding the top of the barrel which causes friction and slows the bb down and a wide bore is designed to have a cushion if air around the bb so it's not creating friction and the longer the barrel the more friction it creates
@opairsoft8100
3 жыл бұрын
@@isaacshively6705 the wide bore theory doesn’t really work since no matter what the bb rides the top of the barrel because of the hop up or lrb if it’s old school. Only time it would float would be with a none hop up/lrb barrel, but at that point range is horrific
@46templar
3 жыл бұрын
So would you buy them Luke as you wouldnt treat your rifs in that way and did you say the retail is £120
@lukejohnson9142
6 ай бұрын
I can’t believe that p90 survived
@warrenholmes3311
8 ай бұрын
As always... It's better to be pissed OFF than pissed ON -- errm so to speak!
@NegativeAirsoftTech
8 ай бұрын
R. Kelly didn't think so
@hyperslow556gungamer
3 жыл бұрын
What is the name of the sight mount on your upper?
@philtrysstrongman
3 жыл бұрын
Iv got no words other then when can I get one 😂
@pushtoexitracing5520
3 жыл бұрын
Gens ace battery to it see how she lives Seems cool tho
@darezi
3 жыл бұрын
Will we have an update soon on these new motors how they are performing?
@NegativeAirsoftTech
3 жыл бұрын
Yup, all the guns I'm working on currently are short shaft & Warhead haven't any short shaft to sample yet but as soon as I can find an excuse for a new warhead video, I'll do it.
@isaacshively6705
3 жыл бұрын
Was that a Smith & Wesson reciever on your rif with the Knights rail?
@NegativeAirsoftTech
3 жыл бұрын
Yup
@isaacshively6705
3 жыл бұрын
@@NegativeAirsoftTech beautiful piece
@deaconvelos8352
3 жыл бұрын
Both nice looking rifles, but your's is better Edit:. Points deducted from this 417? For the upper receiver and selector switch not matching the rest of the gun
@AidanMyne
3 жыл бұрын
Bell G28 when?
@Dollartreetactical
3 жыл бұрын
My brother bought a vfc mp5 a4 competition and the gears cracked the next day.
@whitmills6691
3 жыл бұрын
My friend got a VFC MK18, and after a year I opened it up and there was no damage on anything, a near perfect air seal and the only thing wrong with it was the shimming
@harvey1866
3 жыл бұрын
They should get Sam from KOA to test them haha
@JonZis2023
3 жыл бұрын
TRUE !
@hmg9194
7 ай бұрын
4:09 Shit on it all you want, but that electric gearbox QD removal is SLICK
@henrythebeast7277
3 жыл бұрын
What ratio of gears is that
@troyw5832
3 жыл бұрын
My Rc Dune buggies.....☺😊😀😁😂5 Smile's
@TheRealDealAirsoft
3 жыл бұрын
When ever schmucks come to me with “compression issues” Their shitty flat hop job always is the reason for their 100 FPS loss. And those things are designed to be worn out so why would you super glue one. I removed all r hops and flat hops even from my own shit a while ago. I use regular backings Prometheus purple is my go too
Пікірлер: 257