Oh FFS. That reminds me. I gotta get my 2006 TM MP5 A4 to you for a service. It's seen 10's of thousands of bb's through it. Love the MP5 range of guns. Great video as always. 👍
@ianaumy
2 жыл бұрын
I just ordered a warhead base 35k for my LCT, and hearing your opinion on them assures me that it was money well spent
@TheNinjaman97
2 жыл бұрын
Luke always brings helpful insight and knowledge. Hope all is well with you and hoping your business continues to thrive.
@whale259
2 жыл бұрын
The electrical tape was put in place perfectly to seep glue into the cylinder head for maximum air seal, it’s genius! Good stuff once again!! Appreciate all the information you provide
@cmarriott3835
2 жыл бұрын
Bum sausage
@afkafkafk
2 жыл бұрын
sum mausage
@MrGashforCash
2 жыл бұрын
I am going to call this man a legend, every time i see his Comment from now on ;)
@cmarriott3835
2 жыл бұрын
@@MrGashforCash Bum sausage
@afkafkafk
2 жыл бұрын
@@cmarriott3835 cum porridge
@opasan117
3 ай бұрын
Seagulls come inland after heavy rain as worms come to the surface
@midwestairtech
2 жыл бұрын
Ive found the same trigger creep issue in Specna Arms/Lancer Tactical (OEM appears to be the same, just different color plastics on the inside). 8/10 times I was able to correct the issue by modifying the trigger switch trolleys where they interact with the cutoff lever as they tend to have a lot of extra material hanging off the edges from poor molding.
@chrisestrada6513
2 жыл бұрын
I got the patches. They look great. Also I think it's adorable that you let your kid write the address on the envelope. 🤣🤣😜
@NegativeAirsoftTech
2 жыл бұрын
I knew I had to write it all handicapped or you'd feel insecure about not being able to read, at least you got somebody to read it to you.
@chrisestrada6513
2 жыл бұрын
🤣🤣🤣🤣🤣🤣🤣 I'm dead.
@rogerborg
2 жыл бұрын
It's sad that those JG adjustable spring guides haven't caught on, they're great for tuning between sites or compensating for Joule creep.
@ollegoop9
Жыл бұрын
g&g has similar ones
@TheRealDealAirsoft
2 жыл бұрын
Love your music choice mate I love old school nostalgic shit
@hitmanslayer3003
2 жыл бұрын
I have to say I only had issues with the option 1. Brushless motor. I would definitely avoid if possible.
@NegativeAirsoftTech
2 жыл бұрын
It was already in there
@hitmanslayer3003
2 жыл бұрын
@@NegativeAirsoftTech yeah I know just wanted to worn people not to buy them as an “upgrade”. Thanks for the great content as always.
@marinusdedreu3833
2 жыл бұрын
@@hitmanslayer3003 had great luck with mine. 12:1 short stroked 4 teeth running 44rps at 380fps. Jefftron Leviathan MOSFET, upgraded compression parts, madbull 6.03 barrel.
@hitmanslayer3003
2 жыл бұрын
@@marinusdedreu3833 was never a fan of Jefftron so I never tried it. I tried with multiple gate mosfets and just plain contacts and microswitch. None ever worked right.
@willsahraoui3758
2 жыл бұрын
Great video mate , and some lovely work 👍🏽
@Matt-md5yt
2 жыл бұрын
Glad you gotten to work on some Mp5s again my friend
@AdamHoy81
2 жыл бұрын
Top vid mate, keep up the great work 👍
@renumihai5263
2 жыл бұрын
love the vibe of this video !
@MrGoogle87
Жыл бұрын
Explain more… Motor has active breaking without mosfet?? If so, tbat is huge for me
2 жыл бұрын
Thank Thor for one piece MP5 bodies.
@cautiontap3
2 жыл бұрын
what's the difference in performance between the 20k and 45k motors? why would I want to choose a lower rpm? do they have more torque as opposed to the 45ks? new to motors
@NegativeAirsoftTech
2 жыл бұрын
Same as choosing high torque vs high speed.
@cautiontap3
2 жыл бұрын
@@NegativeAirsoftTech sweet, that's what I assumed. so a 20k would be akin to a high torque then?
@ccb150
2 жыл бұрын
hahaha i told you! Your motors man! ill get one soon if you put a happy face.
@neemyn407
2 жыл бұрын
We need a part where you show us the sound of them seagulls
@stu600cc
2 жыл бұрын
Love it. I want a Neg motor
@elrick471
2 жыл бұрын
What was that song at the end? Bloody loved it!
@Mrmhibbert
2 жыл бұрын
I have an ASG Infinity U-35000 motor in my KWA Ronin T6. Would this motor be an upgrade for ROF and snappiness?
@afkafkafk
2 жыл бұрын
Hey Luke what piston head should I get for a R85/G&G L85 gearbox? gonna replace a sheared piston with a 19 tooth plastic + metal one
@NegativeAirsoftTech
2 жыл бұрын
Decent aluminium
@afkafkafk
2 жыл бұрын
@@NegativeAirsoftTech cheers, single o ring?
@NegativeAirsoftTech
2 жыл бұрын
Single
@Inquatitis
2 жыл бұрын
I wish I could have you work on my rif.
@matthewirvine1361
2 жыл бұрын
Just looking at the warhead motors direct from them, for the sake of £26 black cnc or base motor? Price difference vs performance I'm leaning towards base. What do you reckon?
@TheCaffeineRacer
2 жыл бұрын
What’s the weblink to buy a motor have a JG MP5k that I hope will benifit
@KILLGAMERSCOOT4LIFE
2 жыл бұрын
Do you know anyone who makes steel receivers on MP5’s, I don’t want a proprietary ICS MP5
@NegativeAirsoftTech
2 жыл бұрын
Old vfc did, but the gun was trash. SRC also do still.
@KILLGAMERSCOOT4LIFE
2 жыл бұрын
@@NegativeAirsoftTech I thought you’d know, cheers mate
@hendrakurniawan1802
Жыл бұрын
SRC mate, use regular v2 gearbox
@hhcollective
2 жыл бұрын
Man I wish you worked on Scorpion Evos, I know it's not you're preference but I would have loved to have you work on mine and upgrade the shit out of it. That aside I'm in love with the mp5 and fairly new to Airsoft. Is there a particular one from a particular brand you'd recommend? Most of my local shops are pushing the TM one but hearing what you've said about TMs in the last just not sure what to do!
@BionicBurke
2 жыл бұрын
These base model Warhead motors, the spread in price between them and the black just isn't wide enough to justify not just getting the black. Unfortunate.
@lordirokvs.theworld1641
2 жыл бұрын
So just picked up a Cyma sr25. What motor would you suggest for a DMR build?
@hyperslow556gungamer
2 жыл бұрын
Wow, after watching this video I'm glad I got a CYMA CM.014H Platinum. Disassembly is stupid fucking simple. I think I'm going to drop a Warhead base 27k in.
@adamblythe3169
2 жыл бұрын
Hey Dude, sent you an email on Monday about a T6 not sure if you can help me? Keep up the great vids - Peace A
@julianking4531
Жыл бұрын
Omg you loctite your pinion, I’m probably being dumb by having it completely untightened
@Trooper1911
2 жыл бұрын
Any point in going with JGs when compared to the new Cyma 041s?
@MercutioUK2006
2 жыл бұрын
Interesting question, also interested in finding out.
@ioutpizzadthehut5823
2 жыл бұрын
is it possible to decock a warfet? Also you got me into teching, and im getting my first customer in a week
@darylobey8867
2 жыл бұрын
I learned alot from this channel it saved me buying 3 new guns were i spent a few 100 on parts for my 2 guns and fixing my buddys 2 guns :)
@mariosuper6095
2 жыл бұрын
So what is a better sd6 mp5 jg lr cyma for base?
@FelixstoweFoamForge
2 жыл бұрын
I'm a little confused (and no it's not the booze), I thought brushless motors required an ECS controller? Or is this some other type of brushless motor I've been unaware of?
@shatteredskies191
2 жыл бұрын
It’s built in to the motor, it’s pretty much got a whole microcontroller in there
@penecactus
2 жыл бұрын
In other videos you mentioned that you use ZCI barrels, so I bought some for my guns. I was looking for a hopup bucking (maple leaf super macaron or mr hop) and noticed that the ZCI barrels don't have a little groove going around it a few mm from the window, while the rubbers have the line on the inside. Have you found that the little rib prevents a good air seal? Should I try to make a groove on the barrel, sand down the rib in the bucking or just leave it alone?
@elijaah81
2 жыл бұрын
Just leave it alone. A little bit of silicone on the barrel and the rubber will slide right into place. Dont mind the extra rib
@penecactus
2 жыл бұрын
@@elijaah81 perfect, thanks for the help mate
@NK_Customs
2 жыл бұрын
That rib is specific to the "super" range of Maple Leaf buckings. It is ment for their own barrels (some other brands adapted it as well)
@Dangerouz123
2 жыл бұрын
Whats the size of the allen key that you used to tighten the grub screw on the pinion head?
@marinusdedreu3833
2 жыл бұрын
1.27mm says right on the side of the Allen key
@mpoT3CHY
2 жыл бұрын
Where are the short type Warhead motors? AK users gonna be upset 👀
@comrad3lectro
2 жыл бұрын
Where can I buy one of the negative warheads
@fiddyspencemealteam6208
2 жыл бұрын
I feel like there may have been a couple of subliminal messages hidden in this vid.🤪
@johnnyquest8333
2 жыл бұрын
What are your thoughts on the VSS by Cyma? Or any VSS for that matter.
@NegativeAirsoftTech
2 жыл бұрын
Like Lego made an AK.... absolutely awful looking
@fbeca
2 жыл бұрын
Can we request a video shimming mp5? That pinion to bevel …
@TheHawgy
Жыл бұрын
You can shim that part of it
@halfthebattle8913
2 жыл бұрын
Where can I buy one of your base motors?
@NegativeAirsoftTech
2 жыл бұрын
Gotsta have me build your gun...
@halfthebattle8913
2 жыл бұрын
@@NegativeAirsoftTech makes sense. Sadly I’m in the states so mailing all way to the UK would cost a pretty penny. Was wondering if you were selling any of them separate. At some point I’ll have to get something built by you. Better than most of these paid shill tubers. You give straight talk without marketing wank.
@ALEX-xd7ko
2 жыл бұрын
I want a patch really bad now so i can wear it while i destroy with my hpa . Lol
Пікірлер: 83