I been in construction almost 30 years now and also watched a bunch of new videos for net zero homes. Out of I'd guess 100 or so videos this is the first one I have seen that safety is taken sierious. I just wanted to say thank you to the company doing the install for doing it right and doing it safe!!!! Fall protection while unloading a truck is never seen . I'm glad to see everyone wants to go home alive at the end of the day.
@mcgch46e80
Жыл бұрын
There has to be some limit to these overburdening safety policies; unloading a truck? Come on!
@dannymurphy1779
3 жыл бұрын
700K views - Impressive! Nice closure blocks too. Seen all sorts bodged into those ends, even beer cans!
@owenyarnold4755
2 жыл бұрын
Does anyone know how the thermal performance of the insulation blocks compares to say 150mm PIR insulation that might normally be laid over a standard beam and block construction?
@marksweeney2698
3 жыл бұрын
Thanks Mike. Should have scoped comments first .
@samc5588
5 ай бұрын
Hi we are doing an installation of something very similar. What do you recommend we use to cut the top sheet ? It’s 150mm eps grey topsheet. Using a hand saw can get tiring and takes a lot of time if doing multiple floors.
@lesleywillis6177
6 ай бұрын
I don’t understand why the blocks fit inside the beams ( like block and beam) instead of butting up on top of the beams. This would provide insulation on top of the cold beam?
@JohnnyMotel99
5 ай бұрын
I have seen an example where the insulation was formed to cover the beam from the underside.
@marksweeney2698
3 жыл бұрын
How about vermin control?
@thedude4632
4 жыл бұрын
Ya gotta love a disco builder
@euvoce4644
3 жыл бұрын
Its concrete beam is reinforced or prestressed hardware
@luiz--edz8868
4 жыл бұрын
Muito Obrigado pela indicação da música. Muito Show essa música.
@pedromorales5951
4 жыл бұрын
Love it. if you don't need no scaffoldings for the floors a plus . I would love to see how the project finishes at the end
@ChampangeSuperNovaz
4 жыл бұрын
is noone going to talk about this Banger of a song playing in the background. gawd daym!
@dannymurphy1779
3 жыл бұрын
LOL - Choon!
@mmkm9554
3 жыл бұрын
Bardzo ciekawe i mądre
@ClankyRochet
4 жыл бұрын
My house was build in the 50 and I can't even drill the holes to hang a curtain pole without using SDS drill. Houses these day are being build using cheap material but the prices aren't stays high.
@sprtplt
4 жыл бұрын
The answer to the question no one, ever, asked.
@goldenskeptic6309
5 жыл бұрын
Do you also supply foul pipe hangers for the beams? I have a steel reinforced ring beam footing that sits on piles, the ground under the beams might fall away abit, so can't put foul pipes on the ground, they have to be suspended.
@TheMilbankGroup
4 жыл бұрын
Unfortunately we do not and have not heard of anyone opting for that method due to prestressed floors ‘bouncing’ and therefore the pipes/joints moving. If possible, we would suggest calling a groundworker for their opinion. Thanks.
@goldenskeptic6309
4 жыл бұрын
@@TheMilbankGroup I never mentioned anything about the floor "bouncing" I'm talking about the ground under the beams dropping, or falling away abit, therfore if the foul pipes are on the ground and not suspended, they will sink with the ground under the beams, and you will get back falls in your pipes. By the way, I build houses for a living, and it is pretty much standard practice now.
@olukayodesogeke3516
4 жыл бұрын
Can this be used for a second floor decking... Is this available internationally (West Africa
@TheMilbankGroup
4 жыл бұрын
Hi there. Unfortunately this is a ground floor solution only. We currently only supply to the UK. Thank you for the interest!
Hi Brian, Great question and yes! Our WarmFloor Pro system is compatible with underfloor heating - plastic pegs can simply be pushed into the EPS panels to hold underfloor heating pipes in-situ. I hope this helps? Team Milbank
@kledrcridle7972
4 жыл бұрын
And what about the land dirt that remains under the floor? I will have to put some small ventilators in order to change the air below? What will happen when a snake or mice start to enter beneath? I will have to ......feed them as pets in order not to chew my floor? Put concrete and make the floor on the concrete base
@MarkKelly-fm5vf
Жыл бұрын
The same flooring system in Taylor Wimpey's new build homes but a different brand is SHOCKING for the vibration when the washing machine is on full spin also to mention even when walking through rooms you can see the movement in the cupboards search Google and you will see the UK homeowner reviews soon as you move in they don't care they say it's within regs
@noraadrianadigiorno3463
4 жыл бұрын
Y si hay un incendio? La gente se suele quedar acostada en el suelo por recomendación para no aspirar monóxido de carbono.
@TheMilbankGroup
4 жыл бұрын
Hola Dra. Quím. Nora Di Giorno, gracias por tu pregunta! La breve respuesta es que nuestro sistema contiene un aditivo ignífugo para no presentar un peligro de incendio indebido cuando se instala correctamente. Suministramos WarmFloor Pro como solución térmica solo para plantas bajas. Luego, el piso debe terminarse con un acabado estructural de concreto aplicado sobre el producto. Si se produjera un incendio dentro del edificio, tendría que romper el revestimiento de hormigón antes de que alcanzara la lámina superior de EPS y los paneles de relleno, lo cual es poco probable. El único lugar donde está expuesto el EPS es en el vacío debajo del piso y el suelo, y aunque reconocemos que existe un pequeño riesgo de incendio en una subestructura, la probabilidad de que esta zona se encienda es extremadamente improbable. Sin embargo, en el improbable caso de que ocurriera un incendio en el vacío de la subestructura, el aditivo asegura que el producto se autoextinguirá tan pronto como se elimine la fuente del incendio. ¡Espero que esto ayude!
@noraadrianadigiorno3463
4 жыл бұрын
@@TheMilbankGroup Gracias por sacarme la duda . Están haciendo mi y quiero saber todo lo que pueda.
@carlstoakes6240
4 жыл бұрын
How does the cost of this system stack up against a traditional beam and concrete block solution?
@TheMilbankGroup
4 жыл бұрын
Hi Carl, great question! More often than not, our WarmFloor Pro system is actually less expensive than it’s standard concrete beam & block counterpart. At the time of writing, based on a 50m² area with max centres, using 150mm beams, both Ex-Works costs from Milbank Concrete Products are as follows: - Beam and Block (7.3N medium density), including slips: £1,040 - WarmFloor Pro, including beams, EPS infill blocks, EPS top sheet (75mm) and concrete closure blocks: £997 In this example, WarmFloor Pro is ~4% lower than an equivalent beam and block floor, while typically providing a U-value of no worse than 0.19W/m²K along with the additional benefit of being slightly quicker and easier to install! I hope that helps, but please feel free to contact us directly if you would like more information. You can do so by visiting our website www.milbank.co.uk Thank you, MCP Team.
@l3rigo
4 жыл бұрын
@@TheMilbankGroup I am constructing my house in Belgium and I would like to use warmfloor pro instead of Hollow-core slab. But do you know a company who use your warmfloor ? Impossible to find it... thank you
@TheMilbankGroup
4 жыл бұрын
@@l3rigo Hi Brieuc. Thank you for the comment. Unfortunately, we are not aware of anyone outside of the UK using this system, but wish you all the best in you search to find something suitable. Team Milbank
@mitchdehotte
3 жыл бұрын
@@l3rigo Brieux better use rector rectosen , this product offer a better isolation overall and the strength is also better due to the collabroation of the beam in the concrete plate
@handle1196
3 жыл бұрын
@@TheMilbankGroup im in the uk about to start a block and beam floor on a 2 storey brick built house. Your comparison above has the sections between the beams and then the insulation sat on top and is £40 cheaper. But doing it in concrete blocks would still require pir sheets on top wouldnt it making concrete blocks a lot more expensive, or have i missed something?
@michaelparke1459
3 жыл бұрын
We used to install this in our houses 30 years ago , until the rats eat through it!
@brianbassett4379
4 жыл бұрын
What about hydronic heating?
@TheMilbankGroup
4 жыл бұрын
Hi Brian, Great question and yes! Our WarmFloor Pro system is compatible with underfloor heating - plastic pegs can simply be pushed into the EPS panels to hold underfloor heating pipes in-situ. I hope this helps? Team Milbank
@tr2319
4 жыл бұрын
Oh my god the music. Talk about the products. Who the heck is your marketing lead. This is terrible.
@TheMilbankGroup
4 жыл бұрын
Hi TR, Thank you so much for taking the time to leave a comment with a constructive review, we are sorry that on this occasion you did not enjoy our music selection. Thanks again, Team Milbank
@sinasadeghi6745
4 жыл бұрын
Hello, are the ingredients only EPS or are they mixed with concrete?
@TheMilbankGroup
4 жыл бұрын
Hello Sina. The infill panels are made from EPS only. The beams that support the panels are made from reinforced precast concrete. I hope this helps.
@sinasadeghi6745
4 жыл бұрын
thank you very much , EPS is usually white. Why is your product gray? I find it interesting.@@TheMilbankGroup
@midgardlife
4 жыл бұрын
What about radon protection?
@TheStressD
4 жыл бұрын
Can this system be used for home extensions?
@TheMilbankGroup
4 жыл бұрын
Hi there, Indeed it can! WarmFloor Pro is ideal for any ground floor home extension, providing fantastic thermal properties to keep energy costs to a minimum. Thanks
@TheStressD
4 жыл бұрын
@@TheMilbankGroup Thanks, can you add underfloor heating and screed over without the top sheet, or should the top sheet be applied first and then underfloor heating?
@TheMilbankGroup
4 жыл бұрын
@@TheStressD You can indeed! WarmFloor Pro is completely compatible with underfloor heating, the pipes are simply held in with plastic pegs that are inserted into the EPS TopSheet. The system does require the TopSheet in all scenarios, therefore for underfloor heating; - Place beams - Add EPS infill blocks - Place TopSheet - Place underfloor heat pipes and fix to TopSheet. - Lay structural concrete topping & reinforcement. Hope this helps!
@ftruiemdmbkjg0typepscklg2
4 жыл бұрын
What is the max load ?
@blazrunjic6531
4 жыл бұрын
In my country is called "Voljak" system
@hbakep4278
4 жыл бұрын
In the netherlands this type is available with a higher insulation of lamda 0,033 equal to Rc 6,5.
@786otto
4 жыл бұрын
nice
@TheDMTLover
3 жыл бұрын
Is it recyclable ?
@archemahdi4586
4 жыл бұрын
Is this system fire-resistant?
@TheMilbankGroup
4 жыл бұрын
Hi Mahdi, thanks for your question! The brief answer is that our system does contain a fire-retardant additive so as not to present an undue fire hazard when installed correctly. We supply WarmFloor Pro as a thermal solution for ground floors only. The floor should then be finished with a structural concrete topping applied above the product. If a fire broke out within the building, it would have to breach the concrete topping before it would reach the EPS top sheet and infill panels, which is unlikely. The only place where the EPS is exposed is in the void below the floor and ground, and while we acknowledge there is a small risk of a sub-structure fire, the probability of this zone igniting is extremely unlikely. However, in the unlikely event that a fire did occur in the sub-structure void, the additive ensures that the product will self-extinguish as soon as the fire source is removed. I hope this helps!
@sugiantoandfamily
3 жыл бұрын
👍🏻👍🏻👍🏻👍🏻
@ГалымжанИсполганов
4 жыл бұрын
Что за технология? Что за материалы?
@TheMilbankGroup
4 жыл бұрын
Привет Галымжан, спасибо за ваш комментарий. В этой системе используются панели EPS, пенополистирол, в сочетании с сборными железобетонными балками. Верхний лист EPS затем помещается сверху, после чего заливается бетонное покрытие для отделки. Надеюсь, это поможет.
@ГалымжанИсполганов
4 жыл бұрын
Все спасибо! Буду знать! А на межэтажное перекрытие можно использовать?
@ek9772
3 жыл бұрын
EPS = expanded polystyrene foam
@d8niel77
4 жыл бұрын
Check out lite deck less heavy equipment needed and panels can be made up to 53 feet long
@michaelschneider-
4 жыл бұрын
@d8niel77 .. Agreed. .. The Lite Forms deck product is worth checking into. .. www.liteform.com/litedeck-srs .. Either or companies deck product, when coupled with a hydronic heat system the flooring/deck becomes a flywheel of heat. .. The acoustic properties of an insulated concrete deck/floor are the best of the best. ..
@Mg-wd6id
5 жыл бұрын
What type of blocks are these
@TheMilbankGroup
5 жыл бұрын
These are rigid insulation modules (EPS blocks) manufactured from lightweight closed-cell expanded polystyrene. If you would like to know more, there is loads of information on our website: www.milbank.co.uk/warmfloor-pro/
@connerrobinson4240
4 жыл бұрын
Better to remain silent and be thought a fool than to speak out and remove all doubt.
@euvoce4644
3 жыл бұрын
FACE WHAT WORLD YOU ARE
@cristianmuscia6350
4 жыл бұрын
Dealer Italy ?
@TheMilbankGroup
4 жыл бұрын
Hi Cristian. Unfortunately we only manufacture and supply within the United Kingdom.
@cristianmuscia6350
4 жыл бұрын
The Milbank Group Order and substitution in Italy ?
@willstyles4988
4 жыл бұрын
slow down your text animation, had to pause to read
@TheMilbankGroup
4 жыл бұрын
Thank you for your feedback, we will note this for the next video!
@РамильТатарин-о7з
4 жыл бұрын
5+
@mattybaddT.V
3 жыл бұрын
Just wasted 2:33 mins of my life
@blazrunjic6531
4 жыл бұрын
This is nothing new, prefabricated beams and pieces to fill the void in between beams
@johnbutterworth1369
3 жыл бұрын
3 mil
@ferretface8782
4 жыл бұрын
Everybody and their mother is peddling AirCrete nowadays. Different shapes, sizes, and made-up names... but still just AirCrete.
@TheMilbankGroup
4 жыл бұрын
Hi Ferret Face, Thanks for your comment. Just to clarify, WarmFloor Pro does not use AirCrete or anything similar. The panels are made from durable EPS (expanded polystyrene) and not cement. If you would like to find out more, feel free to visit our website. Thanks, Team Milbank.
@mustafadogan8249
4 жыл бұрын
U
@bubumic2971
4 жыл бұрын
That looks like if i step on it it goes to shit ...
@TheMilbankGroup
4 жыл бұрын
Hi Bubu, Thank you for taking the time to watch and leaving a comment. You are right, at this stage of the build the floor is not designed to be walked on. Once the EPS top sheet and concrete topping is applied the floor is completely structurally sound. Thanks, Team Milbank
@hendrattno1936
4 жыл бұрын
Indonesia kantor telp brp
@TheMilbankGroup
4 жыл бұрын
Halo. Sayangnya kami hanya menyediakan produk kami di Inggris.
@vitaliibrisim9122
3 жыл бұрын
А почему не метр утеплителя, да че мелочиться то...даеш два метра. Маркетологи хреновы.
@alimomali9753
2 жыл бұрын
Suitable place for rats
@jamiecann2485
3 жыл бұрын
More like crap floor
@mitchdehotte
3 жыл бұрын
Rector system rectosten is far way better ! Lol this product is a joke :)
Пікірлер: 98