2006 Toyota Matrix XRS 2ZZGE engine, got the car from a customer after they ran it over a center divider and did not want to put the money in to fixing the damage. Long story short, got the car back to driving condition in a couple of days, had a high sticking idle only when letting off the gas and coming to a stop. Took the upper and lower intake off, replaced all manifold gaskets, replaced all of the vac lines. Still same problem. Replaced the IAC with a Dorman part as the factory part is near 500 $. Problem persisted. Car was parked for a year after that due to other projects. Fast forward to last week. Got lucky and found a throttle body with a factory IAC for 250$. Took a chance and purchased it. Got the parts, cleaned every thing up, installed on the car, p505 clear and has not come back. Car idles at 750-800 rpm and runs great. It had an after market IAC when I got it. so it can be proven, over and over again, never use aftermarket parts on your Toyota
@projecxbuilds9580
2 жыл бұрын
Same damn issue I’m having. I’ve replaced the IACV with a eBay one and it did not fix the code. I replaced 3 different throttle bodies all from Pick a part cleaned them but never taken off the actual module due to special tool and still P0505. I think I’m going to order the special tool and clean the. OEM one and put it back on and see if that fixes my P0505 code.
@jamram9924
2 жыл бұрын
I service Toyotas/Lexus/Hondas. You can utilize certain parts from Denso and Aisin since they are OE providers to these Japanese manufacturers. However, there are certain electronic parts that only come from the manufacturer and directly available from the Japanese manufacturers. Definitely stay away from Chinese made knock off parts. Amazon and EBay are filled with this junk.
@jagtan13
2 жыл бұрын
Dorman is the plague of amazon! and many others lol it's hit or miss with 50% of what I've purchased from them.
@jamram9924
2 жыл бұрын
@@jagtan13 Dorman is good for small insignificant plastic things like power steering reservoir caps, clips for door panels and hard to find dipsticks. For everything else, go with a well known and reputable brand or OE.
@jagtan13
2 жыл бұрын
@@jamram9924 That's the funny thing, I've had dorman clips break sooo, yeah. Even the plastics they've been using have gone down in Quality. I've since been printing my own plastic parts out of esun PETG for clips and other mid temperature nick nacks, nothing directly under the sun. It's ridiculous.
@LAactor
2 жыл бұрын
@@jamram9924 I saw South Mian Auto use a Dorman rear hatch handle and it didn't even for and he had to modify it if he wanted to finish the job. So even "non significant parts" can still be trouble.
@billsimpson604
2 жыл бұрын
Dorman electronic replacement parts are known to have a high failure rate right out of the box. Much of their electronic parts are pure junk.
@tommypistols8104
2 жыл бұрын
Dorman is only good for interior or exterior trim fastener’s
@firebladex8586
2 жыл бұрын
@@tommypistols8104 I bought a Dorman inside door handle for my Corolla. The sturdiness is a far cry from the OEM but it works and hasn't broken yet.
@brianmason8400
2 жыл бұрын
Mr Bill Simpson, I couldn't have said it better myself. There have been times my employer ordered a Dorkman part for something, and I simply refused to install it. Bought a Dorkman tailgate handle for my 01Tundra, it was just the basic black plastic, broke the first time tried to use it. Turned an bought an OE Yota handle, still working great to this day.... that was about 5yrs ago. You could just feel the difference just holding them.
@bradshutler9356
2 жыл бұрын
This is a good example of why I only buy OEM Toyota parts for my 95 Tacoma. A 27 yr. old truck that I have never had any bad issues with.
@Esteban_Herrera
2 жыл бұрын
@Account NumberEight How long did the factory one last?
@lfuentes4098
2 жыл бұрын
Where do you get parts once they’re discontinued from Toyota? I have a 2001 Toyota Tacoma and can’t find a EVAP vapor pressure sensor at any Toyota parts store.
@Esteban_Herrera
2 жыл бұрын
@@lfuentes4098 What is the part number? VIN would help.
@joekresan8990
Жыл бұрын
@@lfuentes4098 I had a stubborn evap code on my 01 taco and read on some boards that a Lexus LS something part from the junk yard would work. I found one easy. Didn’t look the same but works like a charm, no problem.
@lfuentes4098
Жыл бұрын
@@joekresan8990 Cool thanks. Maybe next time. I found a used OEM and installed it. So far so good.
@keylkq6207
2 жыл бұрын
I have a 2005 corolla xrs 6 speed and had to search The world for a secondary air injection pump and valve. They don't make them anymore so basically only dealers have them in stock. Cost over $700 for both parts and car runs great. He is correct that only O.E.M. is the way to go. It took me searching the internet etc to locate the parts but luckily got them in time for inspection time. Great video
@somemedic
2 жыл бұрын
McGeorge Toyota is the best prices on genuine Toyota parts. They're a wholesaler and I order from them all the time
@johntheaccountant5594
2 жыл бұрын
Toyota own 20% of the shares of Denso and Denso manufactures genuine Toyota parts.
@Charlie_Crown
2 жыл бұрын
Great, you do realise that he didn't use an aftermarket Denso product though, he used a Dorman aftermarket part, completely different. Denso produce high quality products, Dorman is the absolute opposite, a high percentage are scrap straight out of the box
@paulodisano502
2 жыл бұрын
My cousin works for Denso in Guelph, Ontario, Canada. They make great part’s for Toyota vehicles. Cheers, Peter! 🇨🇦🇺🇸
@brianmason8400
2 жыл бұрын
Got a Denso eng air filter for my 01Tundra for $10 and a set of rubber "O-ring" style v/c gaskets both for my Tundra, not have been flawless. But yes, I'm about to buy a Denso "front pads and rotors" kit from Rock Auto as well. About 1/2 the money of parts stores....
@stephendibari5010
2 жыл бұрын
eBay and Amazon are full of counterfeit parts especially electronic parts including Spark Plugs and coil packs. Last year I ordered Denso plugs and ignition coil packs directly from Denso for my 2002 Lexus ES 300. Due to pandemic they only had 1 ignition coil pack in stock. Had to wait nearly 5 months for the remaining 5 coil packs to come in stock. Worth the wait.
@garyf2871
2 жыл бұрын
When I purchased a used camry, the coil packs failed. They were aftermarkets. Car had 172k miles. My mechanic said he trusts Toyota OEM coil packs with 100k on them than aftermarket coil packs.
@craigjorgensen4637
2 жыл бұрын
Not worth the wait if the car won’t run! Another reason people take a chance with aftermarket parts!
@emehlhar
2 жыл бұрын
I have had many problems with non OEM parts for my Toyotas. Even things as simple as a doorman bolt for a disc brake didn't fit right. I will only buy Toyota original parts from Toyota if they still make it.
@tommypistols8104
2 жыл бұрын
If you buy Denso, Aisin, NGK, GMB, akebono, nissin or other Japanese brands then you shouldn’t have any problems
@stevensevek6151
2 жыл бұрын
Dorman and Chinese made us the problem. There are aftermarket parts especially for brakes that are reliable like Akebono.
@nordicpride9708
2 жыл бұрын
Yeah good luck with that! All car manufacturers including Toyota are ceasing production of parts for cars over 10+ years
@Esteban_Herrera
2 жыл бұрын
@@nordicpride9708 I believe it. Their business is new car sales. They farm out as much as they can. They can't afford to pay employees what they can get parts for by going outside. What percentage of a Toyota is manufactured by Toyota? or any car manufacturer?
@Esteban_Herrera
2 жыл бұрын
Dorman is an OEM. Just saying.
@davidg5704
2 жыл бұрын
Finding out Ebay and Amazon sells counterfeit Toyota parts. Purchased parts brought them to dealer and were Chinese knockoff parts with Toyota labels. I go to the dealer from now on.
@Anon1mous
2 жыл бұрын
I never buy OEM parts on eBay unless it is from a verified dealer.
@fortis619
2 жыл бұрын
Even ngk plugs are being counterfeited , the Chinese are out of control
@captainamericaamerica8090
2 жыл бұрын
@@Anon1mous Napa PLATINUM PARTS WILL SAVE YOU LOTS OF 💰💰💰💰💰THEY ARE MADE TO EXACTING QUALITY! AND HAVE A LIFETIME REPLACEMENTS! FREE!
@stephenpidwell3427
2 жыл бұрын
Real problem here is the rip off price of OEM parts.
@arengif
Жыл бұрын
Hello Peter. I have the same engine in my 2005 Corolla and it currently idles over 1K RPM so I'll be rebuilding my IAC valve and just buy a new gasket. Amazon sells the 22270-0D040 part number from $20 to $80 but I don't want to risk the rework. Thanks for sharing all three videos on this issue. I wish you would have recorded the cleaning of the electric portion of the IAC valve, but I imagine that would have been a very long video. I admire your patience and as a result of this series, I am now a follower of yours.
@ElectoneGuy
2 жыл бұрын
There are lots of high-quality aftermarket parts. Sankei-555 suspension parts for example.
@nordicpride9708
2 жыл бұрын
Exactly! They make suspension parts for Toyota and made in Japan 🇯🇵
@Anon1mous
2 жыл бұрын
I had a similar QC issue on an aftermarket Honda motor mount. The screw holes did not line up!!! The OEM part was twice the price of the most expensive aftermarket equal.
@LAactor
2 жыл бұрын
Just as an option, I looked up this 1.8 liter baby on Rock A and they said 44.78 for the private label part #2H1388 and zoom in the second pic and see what you see. Two very familiar names starting with T and D. That means as they explained, "manufacturers make parts to be sold by others." Only difference is it might come in a plain white box or similar from the distributor who bought in bulk. I remember doing this one time with a closeout "Parts Master" inventory and it turned out to be a Wix, just different packaging.
@daijoubu4529
2 жыл бұрын
Nice catch, it says Denso on the WVE part
@pitchforkpeasant6219
Жыл бұрын
Good to know. Thx👍😁👍
@TheJeffro396
2 жыл бұрын
thanks to your videos i went with denso plugs, factory wires and denso coils for my truck. costs a little more but better to do it right once than have to do it again. also i found a split vacume hose and fixed it the way you showed. thanks again
@paulsullivan6392
2 жыл бұрын
While I agree OEM parts are best...$400 for an IAC but unavailable,......good grief. It is also true Dorman products are most often JUNK.
@gersonhay984
2 жыл бұрын
Great video. It's amazing how often that happens. 1 out of 10 aftermarket parts might work. But I'm not a gambling man.. OEM all the way. Thanks Peter...
@gersonhay984
2 жыл бұрын
2005 Toyota Tacoma Love my Toyota's All 3
@yactabay
2 жыл бұрын
I don't agree. Aftermarket parts have worked for me about 8 out of 10 times. The factory part works 10 out of 10 times. The problem is that those 2 out of 10 times that the AM part doesn't work, it kills you. You swear I won't do it again but I do. If the price is higher I won't risk it with am AM part. However, if a dealer part is $400 and a reputable brand is $150, I will take the chance with the A M part. Again, 8 out of 10 isn't bad. Where are you getting your AM parts? The flea market? Amazon and eBay no-name brands? Dorman? You just have to do your homework. Research brands
@jimb8842
2 жыл бұрын
@@yactabay Even if the aftermarket part works, they often only last a fraction of the time/mileage that the original part lasted.
@yactabay
2 жыл бұрын
@@jimb8842 You're right but I usually move on to another car before the part goes bad. Also that problem is not always. Many AM parts have never gone bad on me even with a car I've sold 7 years later. I usually buy older mice cars and sell it about 4 years later.
@pedrofernandez8729
2 жыл бұрын
Made the mistaking of getting an aftermarket MAF sensor, it just did not drive correctly. Also had issues with fake motor mounts.
@ASR3Aniversario
2 жыл бұрын
Hello and thanks for sharing these videos. In my experience as a customer, there are parts for a car that you shouldn't buy aftermarket and that are usually the parts that are next to the engine. Otherwise, suspension, braking, some kind of cushions are fine, but even there there is aftermarket and aftermarket.
@Palmer225
2 жыл бұрын
I’ve been burned by not only aftermarket parts, but also by counterfeit parts. Stamped Toyota and they were in a “Toyota/Lexus” box. Fake spark plugs wrecked havoc on my Tundra after 10k miles.
@nordicpride9708
2 жыл бұрын
Good reason to get Denso from a local auto parts dealer or the actual dealer. Only way to avoid the fakes
@02markcal
2 жыл бұрын
@@nordicpride9708 I agree, sometimes they equal the online price.
@SOLOOJESUCRISTO
2 жыл бұрын
Blessings Me too
@ytr8989
2 жыл бұрын
I agree 100% on buying OEM for your Toyota.
@mojavedesertsonorandesert9531
2 жыл бұрын
OEM is the only way to go! I found out the hard way some years back when I changed out my fan belt clutch in my 1988 Toyota 4×4 truck. 😒
@angelsandoval6493
2 жыл бұрын
Hi. A great video my friend. Spare parts chinese, korean and taiwan do not serve and malfunctions. Same problem in Venezuela.
@bliglum
2 жыл бұрын
So true, I had a 2002 Tacoma with a failed clutch master cylinder. I picked up a Discount auto parts replacement, went through all the trouble of replacement, and the NEW part functionality was ALMOST worse than the old used up part! And it LEAKED, fresh out of the box...
@thomaslam6821
2 жыл бұрын
It’s always BEST to get OEM parts if you could or repair the old ones is last resort! Good video! 👍👍👍
@SampsonGG
2 жыл бұрын
Bought a set of Dorman parking brake bell cranks for my 2001 Tundra. The arm wouldn't even properly fit inside the bracket that was INCLUDED with the part... I had to take an angle grinder to them before they were usable. Couldn't believe such a simple part could be so screwed up. Never buying anything Dorman ever again.
@45AMT
2 жыл бұрын
I bought a diesel truck which had Dorman vane position sensor and a vane actuator kept getting codes for both. replace with OEM no more problems.
@ErikSandstrom
2 жыл бұрын
Sadly, some cars like my 1985 Toyota Tercel wagon do not have the ability to purchase OEM parts on many occasions. It becomes a process of identifying what brands can be trusted.
@robertkeefer1552
2 жыл бұрын
I only use OEM parts for my RAV4. I want quality parts so it runs perfectly.
@miahsbrokengarage
2 жыл бұрын
First thing I did when I got my 4 runner is got to pick and pull and grab a bunch of spare parts like throttle body, iac, coils, etc...
@carolhillard4623
2 жыл бұрын
is there a small testing tool I can use to see if the part is good before I pull the part from the junkyard? Just want to get OEM parts too.
@miahsbrokengarage
2 жыл бұрын
@@carolhillard4623 it's hard to test on the lot so you'll have to trust visual inspection.
@glenfilby7637
Жыл бұрын
Thanks olmate for your info,there are no such thing as mistakes ,only miss takes lol😅😊❤
@frankponte4031
2 жыл бұрын
2008 Toyota Sienna van. I used Dorman parts on two occasions with disappointing results. 1. Replacement drivers door check failed within a week of installation. 2. Replacement plastic radiator filler neck retaining clip slot was deformed and clip could not be installed. Dorman parts are IMHO are not even close to OEM standards for material, engineering and fitment.
@adrian-xy7zt
2 жыл бұрын
Nothing to say except you are the best. I love your videos.
@LAactor
2 жыл бұрын
Don't worry Peter you had no choice but to fix it. A used junkyard part is better than a new dorman part. I have good luck from Standard Motor Products/Intermotor Corp, but that's just anecdotal. Anything better than dorman.
@TakeDeadAim
2 жыл бұрын
A friend of mine is an independent shop owner and tells customers straight away that he will NOT use aftermarket parts no matter the make. He will only use OEM regardless of price because of all the issues he's had with AM parts and returns. He's lost some business but he said he doesn't mind as he's plenty busy regardless. I just took my Solara to him for a timing belt and although an AM kit can be bought for about $120 he's installing the OEM kit for about $350 including the water pump. I don't mind as I know it'll last. Taking chances on some easy to replace part is one thing but something like a timing service is much different.
@daijoubu4529
2 жыл бұрын
ASIN kit is perfectly fine, all OE parts
@Pheckphul1
2 жыл бұрын
Toyota doesn't make the parts, they get them from Denso, NGK, etc. Same for their fluids, lubricants, and sealants. You just gotta be smart about the parts you buy, and from whom, and not have a 'Wal-Mart' mentality. Your buddy doesn't care, be just passes the cost onto the consumer. But, to some people, being able to buy the same part for half as much may mean the difference between making rent or not. Here's a non-Toyota example. '05 Acura TLX water pump, $218 from the dealer. Aisin part from Rock Auto, $68. Aisin part had "Acura" ground off of it as they're an OEM for Acura water pumps, and probably easier to make one part than to control for demand between aftermarket and dealer demand. An Aisin timing belt kit costs $250 for this vehicle with water pump, etc. Dealer kit is $650. The difficulty is having the knowledge and experience to know what aftermarket parts to trust. That $400 difference in the example above just happens to be the exact amount that 36% of Americans couldn't afford as an unexpected expense in 2020.
@peterperpetua2974
2 жыл бұрын
I have had numerus problems with Dorman parts, however sometimes that is all that is availadle.
@jamulrichbuzeze3049
2 жыл бұрын
Excellent work as always
@emc4685
Жыл бұрын
Thank you! I'm learning this the hard way, especially with the electronic parts... don't know what I was thinking putting cheapie Chinese parts in Japanese car. Probably why I'm still having my issues. No engine codes, so I'm forced to throw parts at it.
@HouseCallAutoRepair
2 жыл бұрын
Aftermarket electronics, electronically controlled parts, and electrical sensors, are hit or miss. Is the part analog, digital, PWM or duty cycle controlled? The aftermarket often answers this incorrectly. Thank you Peter!
@yactabay
2 жыл бұрын
Aisin makes Toyota transmissions and Toyota partly owns them. I got Aisin CVT trans fluid from RockAuto and worked perfectly. Aisin is not going to put their name on fluid that will damage their transmission 30,000 miles later and risk people thinking their trannys are bad. Aisin was 8 a quart for Toyota specific CVT fluid. The cheapest I could find the 4 liter dealership can was about $80. My closest Toyota dealer wanted $123 for the same can!!!!! Dorman is garbage for most items. I met a guy who replaced a window regulator with a Dorman unit and went bad after only a month. I will keep buying aftermarket because most times they work. Don't buy aftermarket on hard to install parts or parts that cannot be returned.
@trainstractorscarsandtruck7362
2 жыл бұрын
I would return the part, probably faulty out of the box anyway. With a higher grade scan tool there are some things that need to be taught again. I don't think with the year of the car this is one but sometimes these days you have to let the vehicle know you installed a new part.
@craigjorgensen4637
2 жыл бұрын
The question is, are the aftermarket parts inferior or has Toyota figured out how to make their cars reject any non OEM part? If they didn’t charge four times the price of OEM stuff maybe people wouldn’t be tempted to use them!
@nuniabiz7982
2 жыл бұрын
Right out of the box, the drilled holes didn’t fit the throttle body perfectly! Companies spend a lot of money on R&D…do you think they will open source to anyone that want to copy?
@craigjorgensen4637
2 жыл бұрын
@@nuniabiz7982 I understand and I agree….BUT…..when parts aren’t available and an aftermarket part is at a quarter of the price what would you do? I guess if a person had an extra car or could take the bus to work it wouldn’t be a problem. For others they wouldn’t have much of a choice!
@nuniabiz7982
2 жыл бұрын
@@craigjorgensen4637 I agree! I had to do that once or twice with my 2007 corolla.
@brianmason8400
2 жыл бұрын
I COMPLETELY understand that at times, situation pending, you may just have to go with what you can get when, or what's available. But, when possible, if you want quality and reliability, you gotta pay for it!
@Jeff_C_2112
2 жыл бұрын
Wonderful analysis and resolution Peter! Please keep up the excellent work!
@desi4lyfe379
2 жыл бұрын
It is probably the set voltage perimeters not aligning with the dorman part. The computer only know the voltage difference to differentiate between a malfunctioned part vs properly functionally part.
@robertcarter5491
2 жыл бұрын
Am a mercanic and have been using aftermarket parts for over 30years and never had a problem . Main dealer parts are a total rip off expecially nissan and Toyota
@Zomby_Woof
Жыл бұрын
It just depends on the part. Dorman is fine for things like window actuators. I'd have a hard time justifying a 4x higher price on that part. I would also have tried to restore the original part. That particular part I would have sent back for sure. It's not the kind of part where the user expects to have chase bolts holes to make it fit. I still would check the voltage levels being passed to the IAC valve to eliminate the ecu.
@captainamericaamerica8090
2 жыл бұрын
We've seen OE= original parts= when from a solid Co. Like Napa! Dorman! Gates! Donavan! Interstate battery!= match THE O.E= QUALITY= AT LESS THAN HALF THE COST!! THEY ALSO HAVE EXTENDED LIFE TIME REPLACEMENTS! SO IT'S GOT TO BE EXCELLENT! THEY STAND BEHIND THEM! ANYTHING TOYOTA WILL HAVE A HUGE MARK UP PRICE!
@luism3930
2 жыл бұрын
Great work Petr! Nice glasses. The other ones made you look older.
@trainstractorscarsandtruck7362
2 жыл бұрын
I use to have a 2009 Rav4. Monroe shocks from the factory lasted 9 years with no rust on the shock case. Bought Monroe replacement shocks. 1 year later the shocks cases were completely rusted. For some reason the OEM shocks had thicker gauge case on them. Asked Monroe for part number for the OEM and they would just tell me the number of the shock that only lasted a year.
@daijoubu4529
2 жыл бұрын
I think Monroe have more than one supplier, I had some Quick Struts with same part # and they had different springs fitted lol
@brianmason8400
2 жыл бұрын
My 01 Tundra, 175k-ish miles, bought some Monroe coil overs for the front. They didn't ride as well and where more bouncy than the (I thought) wore out OE KYBs that were on it.
@stendecstretcher5678
2 жыл бұрын
Eric the car guy has had similar problems with aftermarket parts.
@mitomr.twiceasnice4358
2 жыл бұрын
I always try not to get counterfeit Yota parts.
@TrollHunterxXx
2 жыл бұрын
Yota 4 lyfe
@n9wox
2 жыл бұрын
😅😅😅
@chongyi2000
Жыл бұрын
Another lesson learned. Thank you very much!
@apoc341
2 жыл бұрын
It’s hard to tell sometimes, as the counterfeits look just the same as the original. I guess if it’s to good to be true it probably is.
@Charlie_Crown
2 жыл бұрын
It's not pretending to be a genuine OEM part, that would make it a counterfeit, it's sold as an aftermarket part, produced with as many corners cut as they can find, especially quality control. The part wasn't counterfeit, it was poorly manufactured and very low quality, to the point it doesn't even fit, let alone work. I don't know how this company is still in business at this stage, such is their reputation
@guadalupecovarrubias3487
2 жыл бұрын
Yes ! Especially gaskets 👍🏽
@highlypolishedturd7947
2 жыл бұрын
I learned that the hard way with the thermostat O ring on my 03 Corolla. It immediately started dripping coolant.
@LAactor
2 жыл бұрын
I hear Fel Pro makes good gaskets though
@daijoubu4529
2 жыл бұрын
@@LAactor they also rebaged, some could be OE ones
@philliplopez8745
2 жыл бұрын
Could it be that you need to introduce the part to the ECU.
@2-old-Forthischet
2 жыл бұрын
Dorman product are very sketchy. I took a chance on a vacuum modulator (not Dorman) for my 2.7L Tacoma with a cheap aftermarket unit. It was easy to trouble shoot and easy to replace so took that chance. So far so good after a few years. I have used Dorman body parts before and they didn't last.
@TheJcrandazzo
2 жыл бұрын
You may have to do an Idle relearn on this vehicle part... Disconnect battery for 5 min or so.. Run idle up to 1500 then back again a few times.. This may solve the Dorman part problem???
@JF-xq6fr
2 жыл бұрын
Yep, just as with a new battery and the vehicle will die and folks think there is a problem...
@annettesurfer
8 ай бұрын
MEH, One defective part doesn't mean the entire brand is bad. And it's almost impossible to tell a genuine Toyota part from a fake. I recently bought a "genuine" Toyota MAF sensor and while the box said made in Japan, the Toyota/Denso part (22204-22010) matched the OEM but without the made in Japan claim. Actually the new sensor had a large "C" font on it, so maybe it meant copy, but it worked. A genuine Denso oxygen sensor (#234-4624) had the part # on the box and on the sealed bag but had #42240 and 12F10 on the part itself, which I found odd. Anyway, it appears the only thing the 2000 Echo doesn't like are the cheap aftermarket fuel injectors because it says: system too rich bank 1, and the idle is high. I don't see any vacuum leaks so I'll clean the IAP next. I just finished correcting a bunch of EVAP codes (P0440, P0441, P0446) by changing the two lines that run from the engine back to the charcoal canister since they were totally clogged. Bought a new Dorman canister as well. I should add that this Echo has been sitting in the yard for 17 years since it went off a dock, crashed through a thin sheet of ice and landed on all 4 wheels in about a foot of water. I guess with 4 young teens, it wasn’t nose heavy. I took the interior out to dry and deep clean, changed the ECU, and changed all the fluids but the trans had a clog so I finally got around to replacing it. Then I had to clean out the fuel tank, replace the fuel pump, replace the frozen alternator, the noisy air compressor, the frozen cooling fan(s), and the frozen blower motor. Apparently everything rusted internally. I mean I took everything apart, cleaned and lubed everything but ultimately everything needed replacement. I’m amazed how smooth and quiet that engine is.
@earth7551
2 жыл бұрын
Very true after market alternators, starters only lasted 2yrs or 12,000 miles
@JediSuPhu
2 жыл бұрын
Dorman is garbage. I had the same IAC valve problem in my Sienna. Took it off and drowned it in throttle body cleaner several times. Fixed the problem.
@DaveGringo
2 жыл бұрын
I have a '99 Camry for 21 years with 336k miles. For years I have put up with a rough idle because I couldn't figure out what was causing it. I replaced the original IAC at maybe 150k because the rubber gasket around it started leaking coolant so I bought a new IAC and gasket (aftermarket)... And replaced it recently with another aftermarket IAC thinking maybe it's why I have a rough idle? Next one gave me same rough idle. So I thought ok it's not the IAC... Well I found my original one in a box of parts. I check the internal dual IAC coils. Resistance was good on both. I cleaned it really well lubed it, put new rubber gasket on it, installed it and now I have a perfect idle again after many years! Keep the original parts when ever you can!!!
@sweetwilliam49
2 жыл бұрын
I buy all kinds of aftermarket parts for my Toyota online. Anything Asin or Mitsubishi, amb bearings.
@pitchforkpeasant6219
Жыл бұрын
Actually got an MSD coil for my chevy truck. Pretty damn name brand. Failed the next day. Comp cams brake vacuum pump for my car. Probably failed before it left the manufacturing facility. Have seen parts or equipment failures in residential construction too. Nothings made worth a 💩 anymore. Hopefully the Toyota parts from Toyota will last
@srj5098
7 ай бұрын
I replaced an evap purge valve from Doorman about 5 months ago in my 1999 Toyota Rav4, and now it was already failed.
@jimv1484
Жыл бұрын
Oh crap!!!!! it is as if my computer saw me order the aftermarket part then the next day this video popped up while watching youtube. I didnt by the same brand but it is still aftermarket. $70 vs $250 is extreme. I thought I would try it and see if it changed or smoothed out the idle in my 2.4. If it does smooth her out I could bite the bullet and buy the oem now knowing this was the cause for my low rough idle. Now I am unsure of my plan. Here is my theory.....maybe....just maybe the 2001 ECU isnt as smart as that 2004 ecu that you were working on. I will report back after install. Thanks for the vids!
@CharlesReiche
2 жыл бұрын
Sometimes parts availability paint us into a corner, and we get bitten. Tough lesson to learn sometimes.
@gemeinschaftsgeful
2 жыл бұрын
Sometimes you can get original used parts on eBay and it will work. Not a way for a business to work looking for scavenger parts.
@JF-xq6fr
2 жыл бұрын
Not all aftermarket are ill-fitted, inop crap out of the box - I have had very good luck with Valeo and Japanese made Exedy clutch components... Now electronic components; Yeah a lot of junk out there, esp reman starters/alternators/actuators, etc... I have had OK luck with Dorman overall, but it could be better. I have also gotten genuine Toyota junk too - Camry W. pump leaked from the weep hole at not even 40k miles... Course they always had problems with OEM pumps (2AZ-FE).
@thomas5714
3 ай бұрын
The pricing on OEM parts are outrageous - because they can bilk you.
@kurtwyatt
Жыл бұрын
I'm am currently having the same problem with my 05 Scion xB. Last summer replaced with a denso part got about less than a year out of it and had to replace it again now only a few months later and it's doing the same thing p0505 code. Car runs fine just a slightly higher idle 700-900 rpm range. Tired of dealing with a warranty to replace a part that is going to ending up failing.
@schadlarry
2 жыл бұрын
Quit buying parts from O'Reilly and your local Toyota dealer. One is junk and the other a ripoff. I found the original IAC for $258 from an online Toyota dealer. For you CA people who don't want to pay sales tax Courtesy in Tampa is the way to go. For everyone else the dealer in Huntington Beach has very similar prices.
@BrianthatiscalledBrian
2 жыл бұрын
I'd like to buy a Toyota part, but I was just told 18 weeks for a wheel bearing. I may have to buy an aftermarket part to see me through until it comes in.
@wolfeadventures
Жыл бұрын
Better off with a used OEM part if new ones are not available
@fernandohood5542
Жыл бұрын
Had a similar issue with as belt tensioner.
@true5188
2 жыл бұрын
If toyota parts is so better than aftermark why did it not last longer if its dubbel to tripple the price
@Charlie_Crown
2 жыл бұрын
There was a rat's nest piled over the throttle assembly, in a previous video, right on top of that idle control valve. As a result, the throttle assembly, and the valve, rusted, but would probably have lasted twice as long, or life of the car, if it wasn't for the rats infestation. And the reason behind OEM parts being expensive, compared to aftermarket, is obvious and understandable, the reason is quality materials and quality control, which aftermarket lacks, and in this case, didn't even fit out of the box. That's the reason why Toyota OEM parts are so much better and also why they are expensive compared to shiny stuff, junk out of the box
@true5188
2 жыл бұрын
@@Charlie_Crown yes if you park a car and not driving it it will last longer wil rusted up and rats making nest so it is a matter of compaire spares to each other on the same level . If Toyota drop the overprized spares price and do not cater for duts in these spares only then I wil buy it . Aftermark part makers exist because there is a need for it otherwise they wont exist anymore . Competition in these business is a good thing.
@daijoubu4529
2 жыл бұрын
If its the original part, it lasted 15+ years? Lol
@joserenderos2136
2 жыл бұрын
tanks you my friend i have 3 toyotas tundra 05 06 and 10 all way i use oem parts,
@warthhoh
2 жыл бұрын
You did a video of a tundra that you put doorman air injection pumps under intake manifold I wonder if it will come back
@LAactor
2 жыл бұрын
I wonder the same about the dorman aftermarket battery that one viewer brought
@markreynolds3850
2 жыл бұрын
Interesting video peter, thanks for sharing.
@General_Ethos
2 жыл бұрын
Maybe don’t go with Dorman but another manufacturer. Not all are the same. And a lot of “Toyota parts are actually manufactured by other companies and just have Toyota on them
@RexenPrime
2 жыл бұрын
Not all aftermarket stuff is bad, but Dorman is notorious hot garbage. Some parts arent bad to use aftermarket parts for, but electronics are better bought oem new or used from a salvage yard.
@robertblacksmith4355
2 жыл бұрын
Glad we got rid of Air Care in BC no more exhaust smog for cars !!
@jasmoore1122
2 жыл бұрын
I have a 2006 RAV4 Sport with the 2.4L engine. About 3 years ago I had the front pads and rotors replaced with non-Toyota parts. That was a mistake, the pads are noisy, and the rotors are warped. Does Toyota have a kit that includes all the necessary parts to restore the front bakes back to stock? If not, where can I get a list of the necessary parts? Much thanks.
@Charlie_Crown
2 жыл бұрын
The lesson to learn here is if the original Toyota part can be serviced, fixed, it is far better to spend the time to do that rather than use aftermarket junk like Dorman, where most of the time you'll do the job twice and be out of pocket.
@agostinodibella9939
2 жыл бұрын
I would have taken the original valve fully apart to clean it before trying a replacement knowing how after market parts can fail.
@rkgsd
2 жыл бұрын
When it comes to headlights housings, aftermarket is fine if you get the certified versions which cost a little more. More precise fitment.
@LAactor
2 жыл бұрын
Buy aftermarket junk and have it crumble in a few years. Bad advice
@awakeandalive4248
2 жыл бұрын
You have me worried thinking that ]the screws that need to be removed in order to clean the IAC were not removable because I've done this job on 4 different Toyota camrys without any problem as a preventive maintenance job 400 dollars is too much money if I can clean it myself.
@n9wox
2 жыл бұрын
A Dorman designed part manufactured in China. What could go wrong? 🙄🙄🙄
@sonofliberty92
2 жыл бұрын
My 05 Scion xA has 271,000 on it. And it hates the AC or defrost on when at a stop. It will idle real low almost as if it wants to stall but never does. I think the IAC is the culprit or maybe something else idk.
@throttleupfly
2 жыл бұрын
I agree 100% Nothing but trouble but toyota
@daijoubu4529
2 жыл бұрын
Not all aftermarket is bad but Dorman is just meh, sometimes if you're lucky, its just rebadged OE parts and sometimes they are the OE manufacturer. But in this case, it appears that there's 2 IAC part # listed for the Matrix, one for rear disc brakes and one for drum when you look at Standard Motor Products and WVE but Dorman only list that one part. That Doman IAC is also listed for the Corolla and that one also have different parts if it's JPP or US made, so maybe it's the wrong part? Seems like the Dorman part is for JPP/drum brakes, where is this Matrix built/trim?
@josephalmatran4260
Жыл бұрын
awesome content. how do you feel about aisin parts for toyota ?
@Mike_44
2 жыл бұрын
Go OEM or go home! Besides, anyone can buy original parts online directly from Toyota for sometimes up to and even more than 20% off.
@alandust2188
2 жыл бұрын
Is there a book or some type of recommendation for what the correct values that I should be looking for while reading live data on my Toyotas?
@daveyk8148
2 жыл бұрын
do you like that craftsman scanner? I need to buy one but I want a decent one
@LAactor
2 жыл бұрын
I wonder if you did a short video showing him got to check the proper oil level since a cold engine can have the dipstick read half to ¾ a quart low since liquid can expand. According to Ahmed, master Toyo tech. Check after engine is fully warmed up. And engine has been turned off for one minute to settle down from the top end. According to him and engine is fully warmed up after 7½ miles of driving or 15 minutes. Personally I think when the coolant reaches 165-180°F or when the temp gauge reaches operating temp just over half mark it usually goes to is fully warmed up, but I'm not going to argue with a master tech's theory that he wants. Underfilled by that much is better (although not ideal) than overfilling by that much, having the crank foam the oil splash and now you have air in the oil and that's less lubrication, and potential to throw a rod if a piston seizes. People can search engine drive cycles for their particular Toy model because some have very particular conditions to set monitors like Evap and similar. Some states do not require smog/emissions testing, however of the states that do, some allow one or two monitors to be incomplete and allow pass for registration/transfer (sale). Some strict states require emissions compliant parts or no modification to the exhaust and some will allow more or less monitors to be tested if the car falls in a certain year. California requires an additional test (EVAP) for certain years like that Camry that pulled in for the oil level check.
@LAactor
2 жыл бұрын
15-20 / 5, half marks if not.
@daijoubu4529
2 жыл бұрын
Uh when you pour it out the bottle, the oil is at room temperature, why would you measure it when it's hot?
@nordicpride9708
2 жыл бұрын
Who the hell gave you that advice???? Hydraulic fluid like ATF expands, but engine oil isn’t the same. Can there be some expansion… yes but barely. Engines should always be checked cold and after sitting on a level surface. Read any OEM manual and tell me I’m wrong! A transmission is a totally different story
@LAactor
2 жыл бұрын
@@nordicpride9708 as I said above the master Toyota tech working at a current dealership and his name is Ahmed. How many years have you worked at Toyota or are you just a senior citizen with opinions from hell.
@LAactor
2 жыл бұрын
@@daijoubu4529 measure it hot. No owners manual says measures MOTOR OIL cold. By then you overfilled a cold snack engine and the moving parts whipping air into the oil will cause lack of oil to surface contact destroying your engine.
@johnlacroix1639
2 жыл бұрын
WOW very interesting super kool ,1st class great info.,, AAAAAAAAAAA++++++++++++ again great video I liked it a lot ,keep up the great work.
@dougfairweather
2 жыл бұрын
Sounds like Toyota wanting to make a quick buck to me...
@brianbumgardner8704
2 жыл бұрын
I have always used OEM parts on Toyota vehicles.
@mohamedmohamed-lk8um
2 жыл бұрын
Hi I have Toyota Prius 2007 I have problems in the tablet no work any time
Пікірлер: 218