so rare to have trades people who care about a high quality finish for the customer! well done.
@allison447
Жыл бұрын
those cable runs inside the brick are incredible. Not sure many can appreciate how much extra work that is. Well done.
@bruceblunderfield5431
Жыл бұрын
Extremely well done and professional! The separate safety switches for each circuit is something I have installed in any house I have owned, and particularly good in a rental house! No more fencing wire in old fuses!!! Brilliantly designed system and of a quality that will last many years! ( ex-sparky)
@SmartEnergyLab
3 жыл бұрын
Excellent installation video. Well done Finn and the team.
@shmickist
3 жыл бұрын
This is exactly what I needed to see! Looking at a 6.6kw system at the moment (obtained quotes via solarquotes) this reminded me of all the questions I need to tick off before I go ahead and sign off. Power optimiser consideration a big one as we have numerous shade issues, and great to see an aesthetically pleasing install too.
@chefgav1
3 жыл бұрын
Go big if you can 6.6kw is very last decade
@shmickist
3 жыл бұрын
@@chefgav1 our house has some serious shade issues, ended up going with 7.88kw with power optimisers.
@chefgav1
3 жыл бұрын
@@shmickist How much shade? A little shade is no big deal really. I loose a little in winter and very late afternoon mid summer and it’s not that bad really
@shmickist
3 жыл бұрын
@@chefgav1 an 80 year old gum covers 3/4 useable roof space in winter.
@chefgav1
3 жыл бұрын
@@shmickist ah OK fair enough. With that much shade imo it would have been better with Enphase
@LukePWilkinsVids
7 ай бұрын
Thanks for this video. It provided additional knowledge that I can then apply when searching for an installer, notably the racking solution brand that would be used.
@hulkbuster5903
3 жыл бұрын
The quality of this system was recorded so it makes sense to show a good installation so are SolarQuotes installers rated on their quality of installs such as installing cables from the inverters inside the wall where possible?
@nickc2144
Жыл бұрын
Good job boys, come over to Vic and do my install!
@stevecallachor
2 жыл бұрын
Show us how you do ace event tile roof. Every time I let a bozo onto my roof I end up with water leaks and cracked tiles. When they walk around they hear the tiles “snap” but they just keep walking hoping no-one noticed. It you drill a hole in a cement tile you have ruined it………it may not snap today, but in a months time it’s a different story. If you let them they will puncture your sarking and , again, pretend they nothings wrong! Your team may be better, but whenever you sub out the installation, tho Bozos let you down I have not yet seen a suitable fixing system for tiles. A lot of people in my area have tiled roofs and they are holding off because if this industry wide deficiency!!! Stavros
@Kregorius
2 жыл бұрын
That's the main reason I went with ground racking. Happened to have room for it. Just spent around 45000€ on a nice tiled roof. It will last for a very looooong time- unless someone has a mad day with a drill and an angle grinder to out some panels on it. Some of the things on KZitem make me sick looking at it. People are screwing up perfect roofs and they will pay for it in the future. There are actually decent functioning systems from some tile producers. The stones already have all the right notches for racking and the passthrough stones etc. But this cheaper to have a go with ana angle grinder... Also cleaning. Give the panels a decade or two sitting on the roof. Even without any panels, there will be moss and lichens. These gather moisture for freeze cycling in winter and there will be damage over time. I guess the moss doesn't grow under the panels or something because there's no way to clean under it. How is biocide chemicals supposed to get under the panels? Planned life of 25-30 years- there may be a surprise waiting under those panels even with the best racking. First some cracked stones. Than the subroof membrane. First time you see any moisture inside, the woodframe is already done with. And that can happen all under the panels out of anybodys sight for decades. No thanks. Ground frame sounds cheap as chips compared to that.
@linghaib
2 жыл бұрын
choose the cheap panels with optimsers without shading issues, what's for? install fronius with smart meter plus part of tigo optimisers. this is engineer way.
@tiger8696
Жыл бұрын
Great job.
@surenbono6063
3 жыл бұрын
.. hopefully newer home roof designed for solar with optimum tilt angle through out the year..also inverter/optimiser has mineral oil submerged cooling..
@gordon1124
2 жыл бұрын
When they run between the two rails, do they run catenary? What's supporting the cables? Great quality video man.
@malwalker4437
2 жыл бұрын
Thank you
@Kregorius
2 жыл бұрын
Always prefer wired internet connection for long lasting systems. Cameras, inverters, security etc. Wifi disruptors are getting cheaper and can bring down 2.4 networks in seconds. There was one system that just nicely asked the WiFi to disconnect eveything from router. Cameras dropped like flies. Also everything has WiFi built in these days. But does it need to have it? My TV has two WiFi networks. But it works 100% same with a wired connection and mobiles can connect straight from router WiFi. Printers are notorious for using some old standards for backwards compatibility. Some can affect router speeds by being only legacy client. And printers work over wifi just fine using the router generated WiFi. Even if you live in a private house, your little extra WiFi networks can severely limit the usable channel amounts. Machines that actually need it for functionality will look up the available channels and there will be some random noise on all the channels. What will happen to a inverter that has lost internet connection? Will it limit itself or just doesn't report to cloud what it's doing. When remote shutdown is installed- I would assume it would limit itself just to be sure to stay in legal limits.
@aandscrawfoski
Жыл бұрын
Giday ,great video. Is the my Micro inverter system i propose a safer System ? My System i wish to build - 4 x 570w solar panels connected to a Micro inverter 2800w 20v - 60v DC in and the output is 230v at 8 amps 50hz single phase. The output from the micros(230v) go to a programable current switch mode battery charger - 230v input - 48v output across 4x 12v 200amp hour Carbon lead batts (48v system) (fixed Controlled Current) The Micros are programable with current sensing. The Micros, to avoid issues would have Surge and RCBO 10 Amps Type B protection very close to inverter on the panel at the AC 230v output side. Micro input from the 4 panels would have 4 separate inline Fuses or 4 pole DC MCB(local panel Isolation) with their own surge protection on the DC side. Home power would come from High frequency sun ark mppt inverter units connected to the Battery 48v (non interference system as Switch Mode charger from Micros to Batts is galvanic and offers isolation as do the galvanic Micros). All IEC approved gear. Its against my religion to use high voltage DC due to the risk factor (hail , water , Mechanical insulation breakdown and the Idiot factor). Im interested in installing this at my brothers house in Queensland with a compliant installer, Thanks Mate from Andrew Nz
@leonvilfand2192
2 жыл бұрын
Why would you use 250A CT for the energy meter? Surely your total household consumption will not draw more than 60-80Amp and your solar generation could further reduce it by another 10-30A from generation. So why 250Amp CT in the switchboard?
@davidchidiebere3677
Жыл бұрын
Good installation solar quotes... But i noticed something, you didn't mention the battery. Like what sort of battery was used for this installation? 🤔🤔
@SolarQuotes
Жыл бұрын
there is no battery on this installation - that was added later and you can see the battery installation here: kzitem.info/news/bejne/15eDxa2Vb4qdlo4
@davidchidiebere3677
Жыл бұрын
Okay thanks so much 😍😍
@linghaib
2 жыл бұрын
pls check cec guideline, label kit installation is wrong
@VT97Calais
3 жыл бұрын
Great installation, how many hours did this take please?
@SolarQuotes
3 жыл бұрын
This job was done over two days in stinking hot summer weather
@arturasramanauskas7018
Жыл бұрын
Good day. I wanted to ask about your tools, which shovels do you use to mount the solar panels on the roof? Where did you get it if it's not a secret? maybe you have an e-shop address?
@billbreaker1680
3 жыл бұрын
What is the heavy-duty conduit that they are using? Is an HDPE conduit a heavy-duty one? Thank you!
@glennboyd1549
3 жыл бұрын
Hi, Just on that ' consumption meter' that you're about to install. To view the graph on it , do you have to go to that inside sub mains box to look at it, or does it have ' wifi enabled' to view it from your phone or computer, or the like?
@SolarQuotes
3 жыл бұрын
You look at the graphs through the SolarEdge app. The smart meter talks to the inverter, the inverter has WiFi.
@denyswoodroffe490
2 ай бұрын
Is there nothing more recent?
@specialized29er86
Жыл бұрын
Turn appliances on and off? I thought we just run the system like the grid power and it saves us money.
@warrenhuck5510
4 ай бұрын
The idea is to run appliances such as washing machines and hot water services during the day when you have solar power available.
@skully5473
2 жыл бұрын
From the very first piece of equipment this fails the gold standard. Ideally it would be a curved foot that follows the shape of the colourbond. This will avoid flattening which can occur using an L foot and it's a better roof interface in terms of strength.
@SolarQuotes
2 жыл бұрын
Skully, when you are installing solar on a tin roof, what brand of feet do you use?
@godx9117
2 жыл бұрын
only use the pucks or need them when doing landscape
@noelgrant5783
2 жыл бұрын
Why only use a 5KW invertor with a 6.6kw solar system? Is there a loss of efficiency from the panels or ration to matching up the inverter to the panels?
@SolarQuotes
2 жыл бұрын
Noel: www.solarquotes.com.au/blog/oversizing-solar-arrays/ (Short answer - 33% inverter oversizing is the max you're allowed to be able to claim the Australian solar rebate)
@noelgrant5783
2 жыл бұрын
@@SolarQuotes thanks. Does that inverter size keep rising proportionately if you have more solar panels and still eligible for the rebate or is that capped or hit a smooth spot at 5KW inverter size?
@SolarQuotes
2 жыл бұрын
@@noelgrant5783 No, it scales up - for example, a 10 kW inverter can have 13.3 kW of panels :)
@chrisnewman7281
3 жыл бұрын
I’ve heard stories about micro converters. Are the same thing as power optimisers?
@jm493
3 жыл бұрын
No. Micro inverters take each panel's DC -> 240V AC, supervised by a central controller. Power optimisers tweak each panel's DC -> optimised DC, and then a main inverter does string DC -> 240V AC. Micro inverters and power optimisers both do MPPT (Maximum Power Point Tracking) at every panel, which is different from normal String inverters that only MPPT for the whole string.
@SolarQuotes
3 жыл бұрын
Different technology that gives a similar result - see our write-up here: www.solarquotes.com.au/blog/solar-panel-optimisation/
@pawanbhalerao7830
3 жыл бұрын
Sir, have any job for solar installation team work
@linghaib
2 жыл бұрын
choose big solar system, worth than solaredge stuff. monitoring , optimsers cant help the customer to save the bills much, install more panels is right way.
@letsavit5324
3 жыл бұрын
Using cheap panels
@zurdac4511
4 ай бұрын
What kind of wind speeds can the solar brackets handle?
Пікірлер: 51