Yes, more people need to watch this when selling their drone to avoid any issues, and avoid anyone being able to potentially fly with your account if you sell the drone with the controller like a the new RC with the Mini 3 Pro, it would just load up the location bc the fly app is already installed and then you can take off when you have that going, especially on the older drones like the mavics or air2/2s on a smart controller or rc pro controller with android almost fully available and used
@filipesilva1395
11 ай бұрын
Hi.This means that i cant fly whit the drone i buyed?I buyed 7 months ago whitout remote controler and today i have a new remote controler but even its pairing the drone simply doesnt take off.
@RuthVanSciver
10 ай бұрын
Exactly what I needed to know! Thank you!
@hankwojo
11 ай бұрын
Don't you just want to unbind from the account, not from the value added service? Then you can pass on what's left of the value added service to the new owner?
@Christian_vd_Laan
Жыл бұрын
I bought a "new" dji mini 3, and it was already bound to a account. Luckily was able to return it tot the shop. I bought a new one.
@SammYLightfooD
4 ай бұрын
Thanks for the video. I bought a used Mini and the seller forgot to take this step, which we will make up for soon. I take it when you sell the drone you dont have to do the first step and unbind the controller from the device (when you sell it together), or am I missing something?
@JayBrokers
4 ай бұрын
Depending on the model some drones will force you to bind a controller to drone, but usually the binding is more about the drone to an account for anti-theft purposes. The binding of a controller to a drone can easily be redone or undone without an account.
@SammYLightfooD
4 ай бұрын
@@JayBrokers Thanks for the info!
@deccma
8 ай бұрын
I have the original mini. I am giving it to my son. I bought the fly more package. My problem is my mini drone is not listed in the device management section of the DJI fly app. Maybe the original mini did not require binding. I note many things for more recent versions of this mini drone when I do searches on how to unbind it but they don't seem to have the same problem.
@JayBrokers
7 ай бұрын
Correct, the Mini 1st gen is not bindable, so you're good to go.
@musafirfaisalvirk8078
29 күн бұрын
i purchased a drone with a bounded id. how can i remove the id as the previous owner is not in my contact
@JayBrokers
29 күн бұрын
Unfortunately it is not possible without the previous credentials. Sorry for the bad news. You'll have to request the previous owner's credentials or ask him/her to remove it on his own via DJI Fly app. Sorry for the bad news.
@_EVfriendly
Жыл бұрын
Interestingly, a few minutes ago I was in my account on the app with my older Mavic Mini turned on and it was shown in Device Management, but when I tapped it, there was no "Remove device" showing with the serial numbers. Then I found and watched this video, and tried again. Fired the drone and controller back up, now the MM is not there at all. It only shows my new Mini 3 Pro.
@JayBrokers
Жыл бұрын
I've seen that happen where it seems to have a "cache" or memory from previous and then once it refreshes you might see different drones listed. So probably what happened is you had previously unbound it, and it just needed to refresh on the list there. I could be mistaken, but I've seen that before at least in our shop here.
@lexxb6386
Ай бұрын
Never unbind it from the value added service (dji care refresh). It's assigned to the aircraft serial number. Just remove the drone from the account, which unbinds it.
@SpikesMavic
8 ай бұрын
Excellent thank you
@ydoucare55
11 ай бұрын
I upgraded from a DJI Mini to a DJI Mini 3 and the old drone is no longer listed under device management. I don't recall explicitly unbinding it. When I go to the DJI support site and check device info after logging in, it shows the old Mini listed under "Bound Devices". Do I need to connect it and turn it on to unbind it? edit: even after connecting the drone, there is no option to unbind it. It appears in the device list next to my Mini 3, but there's no option to unbind. Is this normal? Does binding/unbinding only happen when it's still under active warranty or something? So insanely confusing. I have no idea if I can sell this thing or not.
@JayBrokers
11 ай бұрын
The Mini (1st gen) is one of the few that use the Fly App but don't have a bind option, so you don't have to worry about unbinding on the Mini.
@nedflanders1559
4 ай бұрын
Hi. Thanks for this! One question... does the drone have to be turned on?
@rafaelbuberenko650
5 ай бұрын
help me please. I deleted my account, but did not unlink the device from it. If I register a new email, it says that it is linked to another account. what to do? I needed to unlink the device and only then delete the account
@JayBrokers
5 ай бұрын
We've seen this before...essentially you have to contact DJI and open a support case. Once the acct is deleted it causes a glitch in their system that only DJI can fix.
@rafaelbuberenko650
5 ай бұрын
they wrote that they won’t help since I’m from Ukraine) @@JayBrokers
@rafaelbuberenko650
5 ай бұрын
they wrote that they won’t help since I’m from Ukraine)@@JayBrokers
@riswandiis9079
Жыл бұрын
Sya baru membeli dji mini 3pro orang yg menjual dapat nemu,,apakah bisa di unbind ku mohon tolong aku😢
@shredgardener9231
Жыл бұрын
Thanks! it's quite useful.
@ChamboMango
Жыл бұрын
How do I unbind a mavic 2 pro? It uses the DJI GO 4 app
@JayBrokers
Жыл бұрын
The binding applies only to drones that use the DJI Fly app, so no need to unbind on the Go4 App.
@ChamboMango
Жыл бұрын
Thanks!@@JayBrokers
@turbosenpai_925
Жыл бұрын
will i lose my flight statistics if i unbind the drone from my account? i want to unbind but i dont want to lose my stats.
@JayBrokers
Жыл бұрын
Not 100% sure, but I think stats will remain as they are local to your device (phone or controller). We use a test device with DJI fly app on it to connect and test drones in our shop and it keeps flight stats regardless of us unbinding drones on it, so that's why I think you'll be okay. But, again not 100% sure. You could screen shot ahead of time just in case.
@popeyetsm2750
Жыл бұрын
Hey Jay, Great & informative video, thanks much! I have a silly question: Is it possible to unbind another, previously bound drone (say, an existing P3P) from within the DJI Fly app *while one is connected to a different/new drone* (say, a new Air 2S) *via a new RC controller* ?
@JayBrokers
Жыл бұрын
No problem. As far as I know the binding only applies to drones that use the DJI Fly App, so I think the Phantom 3 Pro is too old to work with it. Otherwise I think it should list all currently bound drones wthin your profile in App.
@popeyetsm2750
Жыл бұрын
@@JayBrokers Thanks again, Jay; I'll give it a whirl & post back re: the results. Have a great day.
@magellanbomba
11 ай бұрын
is this all that i need ? i dont have to log out from my acount after those 2 steps? thank you
@JayBrokers
11 ай бұрын
If you've got a DJI RC controller with screen built-in and you aren't using your phone, then you'll log-out and reset the controller. But, if you're using your own personal phone to access the Fly app, then no need to log out.
@magellanbomba
11 ай бұрын
@@JayBrokers ah ok. I will sell my mini 2 se tomorow to get the mini 4. this helps a lot. cheers.
@DerSystematiker
6 ай бұрын
Thanks. My old Mavic Air 1 doesn't use this app. It connects via the old DJI GO 4 app. Does anyone know if I have to unbind this device before selling?
@JayBrokers
6 ай бұрын
No unbinding on the Air 1st gen, so you're all clear
@user-kb7mp4kc2s
5 ай бұрын
Pls how do iI unbind a third party account from my marvic air 2
@JayBrokers
5 ай бұрын
Not possible...unfortunately you have to ask previous 3rd party for their credentials.
@iansmith1776
2 ай бұрын
If the account has not been unbound the drone is useless?
@JayBrokers
2 ай бұрын
Sometimes you can still fly it...depending on the model. It may be limited to "safe mode" within a certain height/range. But, some models won't let you take off at all if the drone is already bound.
@mightycrown
10 ай бұрын
Hello there, thanks for the instructions. Does the drone have to be connected to the account to unbound. I bought a second hand drone, the owner can no longer see the drone under device management.
@JayBrokers
10 ай бұрын
No, previous owner should be able to remove still by using HIS credentials in the app or by sharing them with you so you can log-in as him and remove.
@yotohiroto
11 ай бұрын
hello i bought my drone from fb market place the seller stop respoding to my message how do i unbind the drone now?
@JayBrokers
11 ай бұрын
Unfortunately it is not possible without original credentials. You can still fly it likely, just can't get full functionality out of it.
@yotohiroto
11 ай бұрын
@@JayBrokers would factory resetting unbind it?
@JayBrokers
11 ай бұрын
@@yotohiroto Unfortunately, no. It's kinda like Apple's "Find my..." feature, basically an anti-theft mechanism. For all you know it could be the person you bought it from knew about the lock and that's why they sold it to you.
@Dhv118
6 ай бұрын
I have the mavic air from 2018 and I used the DJI GO app I Read that I dont need to unbind if thats the case So am I good to go, can i sell it like that?
@JayBrokers
6 ай бұрын
Correct, some models that use Go app don't support binding. Basically if you don't see the bind option as shown in video then you know you're all clear.
@Dhv118
6 ай бұрын
@@JayBrokersthanks for the quick answer👍🏼👍🏼
@mertonom
5 ай бұрын
Mavic Mini there is no unbind or bind??
@JayBrokers
5 ай бұрын
Correct, no binding on Mavic Mini
@Northstar-Media
11 ай бұрын
If you remove it from previous owners account do you not need previous owners password & if you unbind can you then bind it to your own account?
@JayBrokers
11 ай бұрын
Pretty sure you'll need previous password and full ID to remove if prompted. Then once you unbind a test to see if it is successful is to try binding to your account. If you can bind to your account, then you know the previous unbind was successful since it only allows 1 at a time.
@joserizal877
7 ай бұрын
What if I already deleted my account before unbinding
@JayBrokers
7 ай бұрын
Likely you'll need to contact DJI as that would limit your ability to do it yourself.
@joserizal877
7 ай бұрын
@@JayBrokers thanks I'm on it right now!
@ykstand2052
Жыл бұрын
The bind option is not showing up, how can I unbound sn old Gmail from it?
@JayBrokers
Жыл бұрын
You'd need to get/share the old credentials for that DJI account on the last deviced used.
@thefestivalboy
11 ай бұрын
Hey Jay. I'm selling my dji fpv drone. I'm following you steps but my device management doesn't show remove device from account.
@JayBrokers
11 ай бұрын
Do you see the opposite "Bind to Account"...?
@thefestivalboy
11 ай бұрын
@@JayBrokers No I do not but I actually got prompted with a firmware update. Hopefully that's what's wrong. I'll let you know
@thefestivalboy
11 ай бұрын
@@JayBrokers Hey Jay. After dealing with customer support for a few hours, I was told the DJI FPV drones don't need to be unbinded. All you have to do is sign out on the DJI Fly app while connected to the drone and then the new owner will be able to register the drone to their account. I had the buyer do all this in front of me and test the drone out. Everything went smoothly.
@lufenn
Жыл бұрын
Do yo need to be connected to the drone to do this? I nought a drone which is connected to the former owner.
@JayBrokers
Жыл бұрын
The previous owner should be able to do it from his DJI fly app if logged in to his account.
@JayBrokers
Жыл бұрын
Otherwise if you get previous owner's credentials you can log-in as him and remove, then log out
@dronesetc9769
Жыл бұрын
@@JayBrokers no he can't do that , he would need to be in the app and connected to the drone?
@JayBrokers
Жыл бұрын
@@dronesetc9769 Not necessarily connected to drone, just have the app with his ID. It should show up in devices still...then unbind remotely.
Пікірлер: 69