It seems ironic to see everybody complain about the waste without questioning that they're printing 3d pokemons and cartoon characters.
@billjonesnation
26 күн бұрын
Haha ya. TO reduce waste.. print nothing and maybe consider making things from scrap wood.
@Lexs-238
19 күн бұрын
So, all decorations are a waste?
@billjonesnation
19 күн бұрын
@@Lexs-238 Ya pretty much don't you think? I still make them though.
@rhama8751
18 күн бұрын
@@Lexs-238 Yes.
@vvhitevvabbit6479
17 күн бұрын
That's because the "waste" they are complaining about is the waste of money. It hits the wallet hard when you are scrapping more than half the spool.
@MyBrokenStuff
3 ай бұрын
A couple of things: First, there is an option called "flushing volumes" in Bambu Studio and Orca where you can lessen the waste. You can also print the waste to an STL if you want to add an extra item on the plate that you don't care about the colors of (I print the waste to screw driver bit holders). You can also print the waste to the infill of the objects you're printing. There are also more efficient nozzle profiles and updates coming from Bambu to reduce waste. You'll never get rid of all of it, but you can greatly reduce it. It's also important to note that the waste is the same if you print 1 item or 10 of the same item. My favorite advantage of the AMS is that when printing PLA you can use PETG as your interface layer between the supports and the item you're printing so there is very little waste and the support basically just fall off.
@TwoMooseDesign
3 ай бұрын
Great tips! Thanks I never thought of the multiples! That makes so much sense. Thanks 🙏🏼
@enosunim
3 ай бұрын
I heard a way when you somehow add a retraction command just before filament change, this will force printer to cut less filament. And take less time to color transition and thus to make less filament wasted.
@krollmond7544
3 ай бұрын
"You can also print the waste to the infill of the objects you're printing" is there a video showing that? Pretty sure everyone would be doing that if it was true.
@enosunim
3 ай бұрын
Yes such videos do exist. For example this video uOtf-MifBc0
@LFC4LIFEJEDI
3 ай бұрын
I was put off by the sheer amount of waste however the options you have listed has really helped changed my mind, I have yet to see a reviewer talk about these options which is a damn shame
@anthonyflynn2662
2 ай бұрын
the apple/android analogy is actually pretty spot on
@nicolaslavigne6462
3 ай бұрын
If you are printing something small, you can print in multiples on the same plate and you will save in filament. 1 change for many vs 1 for 1
@TwoMooseDesign
3 ай бұрын
That’s a great tip! Makes so much sense. Thanks 🙏🏼
@DadsRCGaragePNW
3 ай бұрын
I have the x1c. I saved for month. Decided after going thru 3 different printers having to tinker with stuff isn’t in my time frame. I LOVE how easy it was to set up. I love all the sensors and how smart it is. Only issue is learning fusion which I am doing slowly. Managed to make a bracket and 2 different fridge shelf’s so far.
@TwoMooseDesign
3 ай бұрын
The X1C is a beast! Modeling is tricky I personally use shapr3d and do it in an iPad
@jimmanis6717
2 ай бұрын
Switch to SOLIDWORKS maker, it's 38$ for a year and in my opinion it would be a good deal at 4x that much. The hours I wasted in fusion are gone.
@rogerwa123
Ай бұрын
I started my 3d journey with a Biqu B1. Lets just say I learned a lot about repair, tweaking, upgrading, and Cura settings. Moved to a Ender 3 Pro ( got it at Microcenter for $99. I just had to buy it). Learned more but that was pretty bullet proof after the upgrades. But slow. I just got the A1 a few weeks ago and absolutely love it. I also love the Bambu studio for the most part. My grandkids love all the neat little things I can make for them. One of the downsides is that you go through filament a lot faster ;-).
@ghostofdre
7 күн бұрын
Pretty much the same, spend way more time tinkering with the Ender these days then actually printing with it, just got an A1 on sale and looking forward to just printing.
@justsomemincedgarlic
2 күн бұрын
I’m thinking about making the upgrade to the A1 from my old Ender 3 v2 that’s been running like a champ since I got it years ago. How much faster would you say that the A1 actually is in your real world experience?
@rogerwa123
Күн бұрын
@@justsomemincedgarlic light years faster with better quality.
@justsomemincedgarlic
Күн бұрын
@@rogerwa123 sounds like a winner to me. Just placed my order this morning!
@jamesmoreno4155
3 ай бұрын
I’m totally going to try printing those crocs
@TwoMooseDesign
3 ай бұрын
Doooo it!!! My feet were too big to print them on the A1 I had to make them for my wife 😆😆 I’ll try again on one of my bigger machines
@shanold7681
2 ай бұрын
I just got one and It works really well, with it being closed source I'm worried for when they force some BS but so far so good....
@Venturror
2 ай бұрын
I think I heard awhile back that you can "technically" install open source firmware onto bambu printers, you just lose the ease of access that the stock firmware has. I think bambu even had a statement on it saying that you can do it, but they just don't recommend it. Not sure where I saw all this though.
@ChidoriAlchemist
5 күн бұрын
Man, I am SO tempted to take a leap and buy this printer. I currently have the Sovol SV01pro and have had it for about two years now. I spend more time trying to fix it because something went wrong rather than printing and because of this, I've lost almost all desire to print.
@TwoMooseDesign
5 күн бұрын
I personally really like it. I haven’t had any issues, I have most of my printers in my shop and this one lives in my house and it’s super quiet. I can be upstairs and send files to it and just go grab the part in a few hours.
@ChidoriAlchemist
4 күн бұрын
@@TwoMooseDesign I love that! I do all of my printing downstairs and with a toddler, it's hard to go downstairs and start a print without him trying to follow me, let alone go down every thirty minutes to check to see if it is still printing! :) I just want to be able to print little toys for him, not worry about why my print keeps failing when it just printed fine an hour ago.
@BeamBros.
3 ай бұрын
PETG would be better for your car. No doubt its gonna heat up and possibly warp, but the UV resistant properties of PETG as well as the heat resistance would be a more logical choice. About the AMS waste, You can drastically cut down waste by playing with the flushing volumes. The default 1.0 is waaay too much. Upon my month of usage, I have found a range of 0.30 - 0.50 is the "butterzone" dependent on color pallatte. There is also another method bambu is working on for a firmware update, it will soon retract some of the filament before cutting and starting the purging thus wasting even less. Another way to help make it not as wasteful is to print several models in the same print. A prime canidate for that would be the pikachu. Something you should have also done for the new users watching this video (good job btw!) was to enable the dynamic flow calibration. It truly does a great job. Will be good for the user who just wants to print without doing manual calibrations.
@TwoMooseDesign
3 ай бұрын
I said that pla would be good for everything except outside or in the car. Maybe I just said it weird lol thanks for the tips! I’ll definitely have to play with those settings! I knew you could reduce it and definitely seemed excessive at stock. Thanks for the tips and thanks for watching i appreciate it 😁
@BeamBros.
3 ай бұрын
@@TwoMooseDesign Maybe I am just getting a bit deaf or possibly dementia may be setting in! I appreciate you making the video! Keep it up bud. PS Love the poopie monster!
@TwoMooseDesign
3 ай бұрын
No worries at all. And thanks I appreciate you watching and commenting. And same they cracked me up, unfortunately they are both too tall! I’ll use the big one as a candy dish for Halloween hahah
@enosunim
3 ай бұрын
PETG is not very well for car too = ) For car ABS is needed.
@BeamBros.
3 ай бұрын
@@enosunim Very true.... However the A1's cant print ABS or ASA
@reallynotpc
8 күн бұрын
Excellent quick tour, thanks. I'm still at the 'considering' stage, but the A1 heads my list at the moment.
@TwoMooseDesign
8 күн бұрын
Lots of great printers out there! I think the Bambu is definitely one of the best at this price range. Thanks for watching
@alanmajors9100
3 күн бұрын
Pikachu is kind of a benchie for multicolor/multifilament, but it raises the question of how waste volume could change with a different orientation of the model or SAR(some assembly required) and printing with an eye towards less waste by printing colors separately without the AMS.
@TwoMooseDesign
3 күн бұрын
Ohhh now I’m curious 😆 I don’t have a ton of multi color experience. I’ll have to do some experimenting
@marcelomiguelbazan
2 күн бұрын
Hi there. As I always say: "If you want an answer to something, search in English" (I'm a native Spanish speaker). I'm interested in this printer, but none of the videos I've watched talked about filament waste, but YOU DID (and with screenshots!). I think I'll buy it (here it's twice the price in the USA), but I'll watch some other videos to optimize the waste of folament. Thank you and greets from Buenos Aires, Argentina Marcelo Miguel Bazan.
@TwoMooseDesign
2 күн бұрын
Thanks for watching! It’s a great printer
@0xggbrnr
9 күн бұрын
Awesome review! I just bought a Creality Ender 3 v3 KE, and someone just told me I should turn it in and replace it with a Bambu A1 Combo. I'm new and basically want to print small ideas (prototypes for small gadgets I design, tiny toys, nothing really for mass production or anything, etc.). I'm new but pretty technical (senior engineer, etc.), so I don't mind learning curves.
@CodyMartin-q7z
3 ай бұрын
Was it just me or when going over the multi-color printing you had the X1C selected in the slicer?.. The AMS Lite changes colors slightly faster due to not retracting the filament as far like the AMS. Also like others stated, due to defaulted flush volumes the amount of waste will differ per user if actually calibrated which essentially brings down the waste to nickel amounts (depending on colors)
@kiptoa123
Ай бұрын
i love that monster on the filament poops
@TheGnthreman
3 ай бұрын
Bought an a1 mini last week and I love it over my ender 3. So I bought the x1c and another mini. Better to have it (x1c) and not need it than not have it and need it.
@TwoMooseDesign
3 ай бұрын
Hahah heck yeah!
@RegularInternetUsers
Ай бұрын
I have a p1s, and i really hate the waste. I use the AMS to print multi part prints with multi color, but never color paint. I print by object, layered to minimize switches, or print by plate. Almost no waste.
@TwoMooseDesign
Ай бұрын
I’ll try that!
@Happy3dprinting
3 ай бұрын
I’ve got an x1c, P1S,a1 and a1 mini, the one I would recommend is the A1 as the maintenance and nozzle changes are far easier if you don’t intend to print abs/nylon. All multi material single extruder printers poop like crazy, Bambu just got there ahead of the rest to understand the problem. Now creality, phrozen and Elegoo are but some to jump onto the poop production wagon.
@TwoMooseDesign
3 ай бұрын
Thanks for the input! I appreciate you watching
@MyBrokenStuff
3 ай бұрын
The Darkmoon ICE plate will take care of that resuming issue. You don't even need to heat the bed with it. If you haven't seen that build plate, then you need to.
@TwoMooseDesign
3 ай бұрын
Interesting I’ll definitely look that up thanks!
@szymusiek22
3 ай бұрын
About that one element loose after missing power. You can skip objects using phone app (so other on plate can finish). Usefoul when there is something wrong with one on plate (multicolor = print many to reduce cost of purge).
@TwoMooseDesign
3 ай бұрын
Ahhhhhh thanks! I didn’t see that option on the display to skip objects. I can on on my other printers, didn’t think to check the app
@wawiator
22 күн бұрын
I sleep next to my A1 mini, it's not bad at all, even when printing actively. Though I would not recommend using higher print speeds when sleeping (sport or ludicrous mode)
@virgiliod.9436
12 күн бұрын
I like a printer that has it's own recycler, after all some chose to 3d print to save money.
@enosunim
3 ай бұрын
I have 'older' machine with wheels, and actually I think they are great! What maintenance do they need? I just use Ender 3 for two years and more and never touched those wheels after I set them up. What 'little' frustration is it about? What can give you a big frustration is maintenance of rail carets. You will understand when you will have trouble with those. = ) As for color printing, when it changes from certain layer, you can print that on any printer which support filament change on the fly. For example... Ender 3 = ) So AMS gives automatically color change. Also you actually can reduce waste percent, for example add some figure which does not depend on any color, and use it as 'waste' tower. You will get a usable 'bonus' item which you can use or sell. But it should be tall enough for the last color change takes place. Thanks for honest review. Not everyone cares about opensource, but it is a good point at least to inform people of what this device allows to do with it. As far as I know there is an opensource firmware for X1, if I am understand correctly it is X1Plus. Bambu was not very fond of it, but after all they allow to use it in exchange of loosing warranty(which will end in a year anyway). So at least for X1 there is some alternative software. But hardware is in big question. Also I heard on some markeplaces there are already alternative components, but not all of them. I personally prefer Ender 3. 'cause it supports filament change, load and unload, filament movement sensor, and who knows what else? You may say 'But my XYZ printer also supports this'. OK, but I want you to remember Ender 3 is already more than 5 years on the market. And new features are still available (because of Marlin firmware and opensource structure). But of course you will need to spare some time to set it up, may be to debug and fill a bug report. Luckily now people who just want to pay to print can just -place order on 3d farm- buy a Bambu printer.
@JNewellworks
3 ай бұрын
Thanks for the great info Jeff.
@TwoMooseDesign
3 ай бұрын
Thanks for watching! I appreciate it
@richh5038
3 ай бұрын
thank you. informative and to the point. i have a neptune 4 , but i still want this.
@TwoMooseDesign
3 ай бұрын
Thanks for watching!
@fredblogs
3 ай бұрын
I also have the A1 and a Neptune 4 Pro. The Neptune has been put back in the box, I love the A1, can’t fault It.
@micdraypr1855
3 ай бұрын
Those look like the 150% Pikachu model, but I was able to do a full bed of the 100% models yesterday on the X1C at .16 optimal, variable layer height, w/stock .4 nozzle in like 11 hrs and barely added any waste over a single model!
@TwoMooseDesign
3 ай бұрын
Yeah the key is to definitely print more than one based on others input. Same amount of waste for one vs many.
@jimmanis6717
2 ай бұрын
@@TwoMooseDesignand orientation is key, lots of things have colors mainly on one side, make that the top and I have cut times and changes by a ton. One was 54 hrs to 15.
@craigspaid3777
3 күн бұрын
Does the QIDI Plus4 have the ability to remove a part if you are printing multiple items and one fails?
@TheFutureLooksGrimm
Ай бұрын
Reminds me of normal color paper printers. This is probably why they are able to sell it for $200. They make so much money back on the filament. I don’t mind. I just bought one as my first 3d printer
@OrlanDave
25 күн бұрын
My first printer was a GEEETECH A20M because I wanted multi material printing. It's horrible! I printed the test file with 2 filaments, and never got one multi color print to finish. It clogs so incredibly easily, and even my local 3D print shop had issues unclogging it. After months of the shop trying to get it to work, they couldn't. I decided to go with the Ender 3 S1, and focus on a printer that works, and is more common, therefore hopefully easier to troubleshoot. It has worked well, and it was pretty fast at the time. I of course want quality, but 150 mm/s still takes far too long. I'm now looking at the A1/AMS Lite as I still want multi color/material prints. I'm printing some models that are taking 2 days each, looking to cut that down. I also still (was the original goal with the GEEEEEEEETECH) want to print supports in PVA because I hate removing supports! I have bed adhesion issues often, and I like that the A1 seems to do very well with this. I have had to recently toss out 2 multi hour prints after several of the supports were knocked off the print bed. I still don't know why it purges and has a purge tower, seems redundant. Even thought I have been occasionally 3D printing for a few years, I still am not very advanced as I just want to send a print, and have it finish without really having to worry about settings and all the parameters.
@TwoMooseDesign
23 күн бұрын
You’ll love an A1 it’s a great printer. Easy to use, minimal filament tweaking, and prints pretty fast. I don’t know much about the printer you have but being geetech in assuming it’s on the cheaper end
@jojomondo5822
3 ай бұрын
I love my A1. It was the first printer I ever got besides my resin one and it’s so fun so much so I decided to buy the A1 mini so I can print multicolor stuff and then print bigger stuff on the A1.
@iphone2009iphone
3 ай бұрын
Multicolor is being demonstrated in this video, right?
@reflexentertainment5484
Ай бұрын
how often do you find you need a bigger machine? I want to print household items, pots for plants, etc.
@DiyintheGhetto
10 күн бұрын
I’m looking into getting one. I have a few printers that are always giving me problems. Mostly the bed leveling is my headache of all. But at times I keep losing alignment and I do like the power on resume feature. Might be worth looking into. The cost is what hurts me the most.
@TwoMooseDesign
10 күн бұрын
With my Bambu printers I never think about the bed leveling. They are pretty great
@DiyintheGhetto
10 күн бұрын
@@TwoMooseDesign yes that is my biggest headache on my cheaper printers when I’m pulling prints from the plate itself.
@TwoMooseDesign
10 күн бұрын
Absolutely, definitely frustrating. The qidi q1 pro, flashforge 5m pro, and the Bambu printers are all great
@peterkn2
3 ай бұрын
I just bought the A1 mini with ams lite and I really like most of it. The camera though... it feels almost like a camera designed to spy on you rather than show you a cool print time-lapse. 4:57 just look at how much of this guy's garage is visible and how off frame the printed object is! I think I'm going to build a clear case for my printer so that the camera will only see reflections of the printer most of the times.
@Tomothy-e3b
3 ай бұрын
Speaking of spying, The camera streams over the internet via bambu 'cloud' servers. No peer to peer on the LAN. Pretty much the same mechanism as how you send jobs to the printer. I don't know where their servers are but I have a good guess where. Make of that what you will.
@TwoMooseDesign
3 ай бұрын
Mines typically facing a wall so it doesn’t bother me, there’s cameras in my shop, on my phone, on my computer. If someone a gonna hack me 🤷🏼♂️ not a whole lot I can do about it. Not like they will see much but me woodworking and 3d printing in my shop lol my printer also has a little door you can put over the camera
@Griit282
Ай бұрын
"...I have a mac book.." HAH! thankyou! great info thanks, Have an X1 and love it just needed to verify this would be functionally the same. Cheer!
@TwoMooseDesign
Ай бұрын
Hahah yep! Sending files and such is all identical. Even the build plates are interchangeable
@donkeymarco
Ай бұрын
Maybe You should make a video about Bambu Lab (and sister companies) patents. You'll see what they have patented... Bambu Lab problem is their close intellectual property aptitude. A patent owner will not allow someone else to have a derivate patent since will close that owner free development of their i.p.. With open source they instead have no problems in including that new design in their own products.
@TeddyCahill-km3fz
Ай бұрын
I watched this literally 1 hour after buying the A1 combo
@TwoMooseDesign
Ай бұрын
You’ll love it! It’s a great printer
@yagsipcc287
Ай бұрын
This video was a big help to me :-) I think the idea of the multi print is cool but is a pain also I enjoy painting stuff I make. I resin print myself but looking to get something like this for making bigger stuff for around the house and you know masks helmets etc..
@TwoMooseDesign
Ай бұрын
Thanks for watching!
@Widzu1010
Ай бұрын
A1 combo is a very nice printer, it's a pity I can't afford it .I'd love to have her
@TwoMooseDesign
Ай бұрын
It’s Great printer, they just had a big sale. I’m sure they will have another around Black Friday
@mariospanna8389
Ай бұрын
What happened to your video from 6 months ago titled "The end of Bambu!" still reviewing them i see definately not a click bait title like most your content xD
@TwoMooseDesign
Ай бұрын
Oh
@patrickrobinson317
5 сағат бұрын
Great video. 😊 Thank you for making it. Does it support the use of Dissolvable filament ? What are you thoughts on this ? 😊 Thanks !!!
@TwoMooseDesign
Сағат бұрын
Thanks! Yes it does, I personally don’t use it as I don’t have problems with supports. It’s just an extra step I don’t need. But some people definitely like it!
@aberodriguez4149
3 ай бұрын
@Two Moose Design is it possible to order Bambu A1 without the AMS unit at first and then later on order the AMS unit install it without perhaps having to order a new Hot End to be able to feed the four filaments ? Thank you for your review and your time, happy printing.
@TwoMooseDesign
3 ай бұрын
Yes you can, it should only take like like 15 minutes or so to set it up if you decide to upgrade later
@aberodriguez4149
3 ай бұрын
@@TwoMooseDesign Thanks for your speedy response greatly appreciated, happy printing.
@TwoMooseDesign
3 ай бұрын
Have a great day!
@emmanuelskolinos1361
3 ай бұрын
I agree the only thing that a AMS system is good for is the change filament type the rest 4 color prints with 2 and 3 times wasted filament not worth it
@TwoMooseDesign
3 ай бұрын
I do love the AMS! I just don’t have a ton of use for multi color, mostly like 2 color prints for like text. But it’s soooo easy to just select another filament in the slicer or load a new one
@UnwrappingByMimiKoteng
Ай бұрын
Hi. Can provide link for the spool adapter?
@OldManJimmy1
Ай бұрын
The open air AMS wsa a little worrisome for me here in Dallas Texas. When the recall happened I upgraded to the X1C.
@Trumpetman12345
26 күн бұрын
What program are you using to print?
@TwoMooseDesign
26 күн бұрын
Bambu slicer and I use orca for my other printers
@Trumpetman12345
26 күн бұрын
Thank you!
@anonharingenamn
18 күн бұрын
If I don't care about the multi-color aspect of the A1, should I go with a different printer in the same price range instead?
@lugiareborn356
29 күн бұрын
So you are telling me that for each layer of different color it will switch color and then if another color is in the way it will change and flush color again?
@TwoMooseDesign
27 күн бұрын
Yes hence why there’s so much waste. You can find videos on how to minimize it
@TwoMooseDesign
27 күн бұрын
Not sure if I ready that right but it will fill all the color on one layer, purge, fill the remaining color, start the next layer, purge, and then continue to the next color. It fills in colors by layer
@legomasterpl4477
2 ай бұрын
i want buy one (ive been looking for 3d printyed for few years now) - and in same price i have bambo a1 mini combo or A1 without the 4 spull ams - what u think is better? - i dont see a problem to work on print (painting ect)
@YesName_1
Ай бұрын
Is it true it comes with an sd card with pre made digital models? And is waste produced when only using 1 roll of filament?
@TwoMooseDesign
Ай бұрын
Yes there are files pre loaded on the machine but not like a ton of them. You can go to makerworld.com to find free files. And no it only wastes with multi color this waste can be reduced with setting changes
@johnnyhellfire6
7 күн бұрын
Try elegoo filament,really great quality, low price, CARDBOARD spools, dont need a adapter
@TwoMooseDesign
7 күн бұрын
Thanks! I’ll check them out
@johnnyhellfire6
7 күн бұрын
@@TwoMooseDesign almost life changing lol and the pey/poy beds work way better then the textured
@jojomondo5822
3 ай бұрын
By the way, I have mine in my bedroom while I asleep lol I wake up early in the morning so it’s fine
@marciooliveira8017
25 күн бұрын
Do you provide the stl of this "purple monster with its mouth open"?
@TwoMooseDesign
23 күн бұрын
It’s on makerworld.com look up A1 poop shoot, scale it shorter as mine was too tall printing it the original size
@radupirvu9854
3 ай бұрын
What's that PTEG you talking about
@TwoMooseDesign
3 ай бұрын
It’s magical also know as petg
@Norad-i7h
3 ай бұрын
I'm watching this as I want this printer. I have a toybox, but want to move on. Is there anyway to reuse the waste or purged pla?
@TwoMooseDesign
3 ай бұрын
Not as of now for an affordable set up, I have seen people put the waste inside other prints. You can also make multiple prints at once so there is less waste. The printer is great and easy to use’s unfortunately without spending alot of money there’s not much we can do to reduce or recycle the waste.
@TwoMooseDesign
3 ай бұрын
Prusa is the only printer with multiple heads that I’m aware of that eliminates waste but it’s very expensive. You can look up ways to reduce the waste of the Bambu in the settings you can definitely cut it down a bit
@Mephiston
Ай бұрын
Doesnt makerworld also have the option for users to upload different filament profiles to reduce settings waste?
@TakiLoveCrafts
Ай бұрын
Where did you find the filament adapter for the sunlu
@krasspenn
3 ай бұрын
Print multiples and the waste vs product ratio will decrease
@TwoMooseDesign
3 ай бұрын
Someone else just mentioned that! Makes so much sense, I’ll definitely take advantage of that. Thanks for the suggestion 🙏🏼
@foxec4046
3 ай бұрын
I’ve never had or used a 3d printer, I’ve been thinking of getting a a1 or a ender 3 v3 SE. I’ve looked into the a1 mini but I don’t like how small the base is. Are there any other printers I should consider?
@foxec4046
3 ай бұрын
Also would prefer if it had some sort of pause feature but idk how common that is in printers
@TwoMooseDesign
3 ай бұрын
You should be able to pause all modern printers. I personally would buy the regular A1 without the AMS unless you have the budget. You can always add it later
@foxec4046
3 ай бұрын
@@TwoMooseDesign thank you so much! I am planning on getting the a1
@shadbadrkhan7413
17 күн бұрын
Please say you didnt buy the ender v3 se over the A1
@foxec4046
17 күн бұрын
@@shadbadrkhan7413 I didnt, I changed my mind about getting a printer honestly. But if I ever do im gonna get the A1
@anthonyholmes1312
3 ай бұрын
BUT! Can it print that frigging ninja sword successfully?
@TwoMooseDesign
3 ай бұрын
This is the real question here! 😆
@davesworkplace1616
7 күн бұрын
Which Titebond Instant Bond glue are you using in this video? The 6211 or the 6212? Thanks~
@TwoMooseDesign
7 күн бұрын
I don’t know what those numbers are but I use the thick 90% of the time. Medium is a little watery for 3d parts and gel is almost too thick for me. Bonds great though!
@davesworkplace1616
7 күн бұрын
@@TwoMooseDesign Ok thanks. I tried to read the bottle from the screen and I thought it said "Medium" so I ordered 2 - 4oz bottles from Ebay. I will hunt down some thick too so I should be all set. I also got the accelerator or activator on order. Thanks. I recently bought 2 - A1 Mini Combos, 1- A1 Mini, and 2 - A1's that are still in the boxes. Gotta set up an Access Point for the WIFI today and soon I will be printing. Now I have 11 3D Printers including 1 MK4 in an enclosure. :) And I figured out the correct part number for the thick is either 6221 for the 2 oz size or 6222 for the 4 oz size. Titebond 6222 Instant Bond CA glue thick 4 oz.
@ivanoutside
Ай бұрын
Hello there, is it less waste if you print a single colour only?
@TwoMooseDesign
Ай бұрын
There’s like no waste only when doing multi colors
@NateTL4
2 ай бұрын
Hey I’m not that new to 3d printing I have 2 now so I’m thinking if I should get a p1s or an a1 3d printer
@TwoMooseDesign
2 ай бұрын
If you do not own an enclosed printer I would 100% get the P1S
@NateTL4
2 ай бұрын
Okay thank you
@3dmagictricks
Ай бұрын
I think you needed to dry the TPU, that was its issue
@remotepinecone
5 күн бұрын
ok maker world is pretty cool
@TwoMooseDesign
5 күн бұрын
It’s great lol they got everything on there
@jaroslavdulik1439
3 ай бұрын
And can I use 2 ams's?
@mcorrade
2 ай бұрын
cool vid, got a question? Why are all the cameras on 3d printers so bad? In this day and age, a decent camera is not expensive so it makes no sense unless I'm missing something?
@TwoMooseDesign
Ай бұрын
I have no idea, I’m assuming to save money on their end
@richmannwoodstudio
Ай бұрын
Great video. I went to the A1 website. There is an Accessory Bundle. But, I don’t know what the options are good for. Can you enlighten me? Thanks.
@TwoMooseDesign
Ай бұрын
The accessory bundle gives you a new hot end but the printer should come with an extra. You also get an extra build plate which is nice but not really needed. It’s basically spare parts on a minimal level. Build plates have different uses, for example a smooth sheet will leave a smooth bottom and the plate that comes with it leaves a textured bottom on the print.
@TwoMooseDesign
3 ай бұрын
Do you prefer bed slingers or Core XY machines??
@enosunim
3 ай бұрын
I prefer which one is cheaper = )
@mohistschool1003
3 ай бұрын
It has to be CoreXY, when I print tall models the A1 doesn't give good results at the top. I prefer the cheaper QIDI Q1.
@TheFeist77
3 ай бұрын
I want to print durable keychain prints for my sons band. What filament should I use with my new bambu mini with ams?
@TwoMooseDesign
3 ай бұрын
Hey! I would use PETG it’s going to be more durable than PLA and withstand the elements better
@TheFeist77
3 ай бұрын
Thank you
@TwoMooseDesign
3 ай бұрын
You’re welcome! PLA might be fine for something like that? Depends how much abuse it will get. I actually think I saw a video on making key chains the other day 🤔
@Thepianist12
Ай бұрын
14:41 I have a macbok 🤣🤣😂😂😂😂
@TwoMooseDesign
Ай бұрын
It’s true….😆
@Slurgical_3D_Terrain_Channel
8 күн бұрын
change the g-code for the poop
@billb921
3 ай бұрын
Nice Laguna 😉
@albertjimenez185
2 ай бұрын
Can you share the link to the Grimer looking purple purge bucket thing please and thank you.
@albertjimenez185
2 ай бұрын
Nvm I found it. makerworld.com/models/92332
@groznyentertainment
28 күн бұрын
Are you sure there is no v wheels or they just hidden?
@TwoMooseDesign
23 күн бұрын
It does not have v wheels
@ntdtv
3 ай бұрын
Greetings, Divya here with NTD Television. We are one of the world's fastest-growing media companies with over 100 million fans and 1 billion monthly video views across all of our social properties. Our motto is truth, hope, and humanity. We love your videos and our editors would like to showcase them by uploading them on some of our social media pages and websites so that our fans can see them. Of course, we are happy to credit your channel clearly to make sure people know how to find you and your videos. You will still hold the exclusive rights to the video. Can we have your permission to do that? Kind regards, Divya
@legice
Ай бұрын
- I have a macbook. This is the perfect example/analogy! There are things that I like to tinker with, adjust, hack and so on, but I just want my printer to print. Yes, Im willing to pay 25€ for a part that needs to be replaced on a bambu machine, because for the 6€ part on a different machine, I will need more time, tinkering and effort and is going to end up costing me more in my personal time, which Im not willing to give =)
@officialchenal564
3 ай бұрын
So cute wood carving machine 👍
@TwoMooseDesign
3 ай бұрын
3d prints all my wood
@eaman11
3 ай бұрын
White benchy?
@TwoMooseDesign
3 ай бұрын
Yes white pla, definitely the worst color for filming lol
@eaman11
3 ай бұрын
@@TwoMooseDesign Well it's not like we didn't ever see a benchy from the A1, still it's blinding useless ;)
@TwoMooseDesign
3 ай бұрын
Hahah I’d hope it could print a decent benchy lol thanks for watching!
@crooker2
Ай бұрын
I want a printer with multi color. I have 2 ender printers, which I want to sell for 1 bambu A1. But is there a way to reduce the amount of waste in a multi color print? (I. E. reduce the poop output)
@TwoMooseDesign
Ай бұрын
There is yes. I believe you can do it quite a bit. I’d look up some KZitem videos but it’s 100% possible. I’m running it stock set up I don’t do a ton of multi color
@divine_masculine69
Ай бұрын
I’m new to 3d printing and have a 500$ budget. I want a 3d printer specifically for like cosplay helmets. would you recommend this printer for that
@TwoMooseDesign
23 күн бұрын
Ehhh yes if you have a smaller head or want to print multi piece helmets.
@Killso420
3 ай бұрын
too late, it's on it's way
@TwoMooseDesign
3 ай бұрын
You’ll love it! It’s a great printer
@dagoelius
19 күн бұрын
No ethernet connection is a deal breaker that no reviewer is talking about. Its a shame cause its a great 3d printer.
@Malkolmi
Ай бұрын
That is like a full roll of waste! Is that from ONE print, or did you collect it for some time? I am happy that I got a Prusa XL. I hate waste. Also, I print a bit with more expensive materials, so I dont really want to trash 100g per print at $60-80 per roll!
@TwoMooseDesign
Ай бұрын
It’s only with multi color where there’s alot of waste. You can minimize it but the only way to mostly eliminate it is with a multi head unit which is far more expensive.
@TheJmllr112
3 ай бұрын
Where did you get the file for the golf ball can/cup?
@TwoMooseDesign
3 ай бұрын
I’m not sure what you’re referring to but I got all the files off of makerworld
@TheJmllr112
3 ай бұрын
@@TwoMooseDesign ok thanks
@pcdoc2000
3 ай бұрын
I somehow never could convince myself of buying a Bambulab and never really new why. But you said it: It is like Apple! And I would never buy something from Apple! 😉
@TwoMooseDesign
3 ай бұрын
Haha and that’s okay! There’s plenty of options out there as long as you get the results you’re happy with who cares what anyone else uses!
@scsextra
3 ай бұрын
Good for you 🙄🙄🙄🙄🙄🙄
@D0N074in6100p
26 күн бұрын
It's not the same. With apple you can never touch to repair or modify anything because it would brick your phone. With the bamboo lab you can modify a bunch of stuff and can use any filament doesn't need to be bamboo lab specifically, therefore that comparison is lacking.
@wmcrash
3 ай бұрын
Two Moose Two, Electric Boogaloo
@TwoMooseDesign
3 ай бұрын
😆😆😆
@MischaGielen
2 ай бұрын
I'm intending to buy the A1 without the AMS kit (non-combo). Will it also produce that amount of PLA-waste or is that only relevant if you change colours a lot?
@TwoMooseDesign
2 ай бұрын
its only relevant when it switches colors. You can always add the ams later, its great for switching rolls as you only need to press a button. I dont print much multi color and i think the ams is great still.
@MischaGielen
2 ай бұрын
@@TwoMooseDesign Many thanks for your quick reply! As I'm on a bit of a tight budget I'll skip the arms right now.
@TwoMooseDesign
Ай бұрын
You’ll love it great machine. Thanks for watching!
@chriskwakernaat2328
25 күн бұрын
switching from an empty spool to a new one only works if the filament isn't locked down on the end. i.e through the center of the spool , taped etc.
@roundcheesewheel
3 ай бұрын
This video has completely changed how I look at multi color 3D printing. I think I'll hold off on buying a multicolor machine until the waste is reduced significantly.
@TwoMooseDesign
3 ай бұрын
The AMS is still super nice and makes swapping spools way easier. Also look up how to reduce it, there are tons of ways to minimize it, it’s just not something I know enough about to share but there are people way smarter than me on KZitem lol thanks for watching!
@jacobjames8137
3 ай бұрын
There are a lot of settings you can use to reduce the waste to over 60% reduction. Don’t get discouraged!
@quandaleabduljabbar1276
3 ай бұрын
Can I get the stl link of the gold vases you showed in the video at around 6:10
@TwoMooseDesign
3 ай бұрын
I found them on www.makerworld.com
@quandaleabduljabbar1276
3 ай бұрын
@@TwoMooseDesign Thanks Man! Appreciate it
@jatsantsa
Ай бұрын
Yes Prusa is not using slave work so price is higher.
@skywalkr2
Ай бұрын
A1 without AMS I think is a great option, but the AMS is just wasting so much - I just can't agree with it.
@TwoMooseDesign
Ай бұрын
I love the AMS for quick swapping of filament. I rarely multi color print and I’m glad I have the AMS on both of my machines
@traviswright264
27 күн бұрын
Where did you find your poop collector?
@TwoMooseDesign
23 күн бұрын
Makerworld.com
@Imad_Oofus
3 ай бұрын
I’ve had my X1C for over a year now and I can easily say it is FAR SUPERIOR of a printer for beginners then the A1.
@TwoMooseDesign
3 ай бұрын
I agree it is a great printer but! The price point is a lot for a lot of people just starting out. I personally started with the X1C
@13_cmi
3 ай бұрын
Is a $1,000 machine really for beginners? Yeah I doubt that.
@TwoMooseDesign
3 ай бұрын
Yeah most people aren’t dropping $1300 on their first printer lol I typically recommend the P1S over the X1C just because it’s more affordable and most people that are new with even notice the extra bells and whistles
@EnsErkl
3 ай бұрын
Yeah and I think Bentley is a superior car for a learner driver.
@gedediva
2 ай бұрын
You must have a unlimited budget to start a new hobby or business with that tool
@DarcyFletchh
2 ай бұрын
I ordered one without the multi color, so surely I wouldn’t waste twice as much, as it only has to purge once or twice right? It’s my first printer so I’m sure it would be fine?
@frankcoldwell4424
Ай бұрын
Using a single colour wastes virtually nothing, mine uses a tiny little bit when first warming up and extruding ready to print.
@ntdtv
3 ай бұрын
Hello, I wanted to kindly remind you that I sent you a message regarding your videos. Do we have your permission to use them? We would be happy to know if there is any special requirement for publishing your videos that we could fulfill. Thank you! :) Sincerely, Divya
@TwoMooseDesign
3 ай бұрын
No
@ntdtv
3 ай бұрын
@@TwoMooseDesign Hello, Thank you for your reply. No problem, I understand! I wish you all the best!
@ntdtv
3 ай бұрын
@@TwoMooseDesign One side note, we strive to safeguard human rights around the world. We cover many stories which others don't talk about, including the ongoing persecution of Falun Gong practitioners in China. These innocent people live by the principles of Truth, Compassion and Tolerance but have been persecuted since 1999. Please watch this video that was created as one of many efforts to raise awareness. Feel free to share it with other people. bit.ly/2ToMcPZ Kind regards, Divya
@3dmagictricks
Ай бұрын
are you aware that the company uploads your gcode files and claim it their own - I'm not 100% sure if that's the case but worth investigating
@TwoMooseDesign
Ай бұрын
So what you’re saying is you have no idea?
@groznyentertainment
Ай бұрын
Some rumors I've heard. It's probably nothing. When you print a file via wifi the file has to upload somewhere in the cloud - that's probably what's happening
@TPCDAZ
29 күн бұрын
You cannot start a comment with "are you aware" then end with "but it may not be true" ffs
@groznyentertainment
28 күн бұрын
@@TPCDAZ you can't ask questions nowadays .
@TPCDAZ
28 күн бұрын
@@groznyentertainment He wasn't asking a question. He worded it as a statement.
Пікірлер: 308