I put up a similar arrow shed in south Texas for a pump house. It was still there after 12 years when I sold it . They do get extremely hot in the summer . It would heat up my water tank so hot I didn't need to use hot water . I ended up putting soffit vents on the bottom and top . Didn't have any issues after that .
@TonysTractorAdventure
Жыл бұрын
I am going to spray foam mine.
@primer50
Жыл бұрын
@@TonysTractorAdventure Might be a good idea if you get high winds and should help with the heat . Mine was pretty protected against the house . My neighbor had one in the middle of his field for a well house and it disappeared never to be found after Hurricane Ike .
@altonmaxwell5304
Жыл бұрын
We always called this type of gravel “chert” a mix of gravel and dirt . Crusher run around here is limestone and limestone dust .
@TonysTractorAdventure
Жыл бұрын
Whatever it is it packs hard.
@goingoutdoorswithmatt7962
Жыл бұрын
Hey Tony, that building isn't bad for the price. Even if you only get 5yrs put of it. It seems well worth it. The job came out great. Thanks for sharing. Be well 👍🏻
@TonysTractorAdventure
Жыл бұрын
We are going to spray foam the entire inside.
@deanbarr5740
Жыл бұрын
I'm a bit like you Tony, nothing wrong with taking a little pride in what we do. Even if it takes a little more time, it often saves money and time if you put a little more effort into it.
@TonysTractorAdventure
Жыл бұрын
I agree. The floor is one of those things.
@MichaelSmith-dg3kr
Жыл бұрын
Up in Virginia, I've always heard it called Bank Gravel. It can be run through a washer and get the gravel, and washed sand. Concrete sand, or morter sand. Also, it packs extremely hard. A very good road base.
@TonysTractorAdventure
Жыл бұрын
I used it for the road base too. Very good.
@scrotiemcboogerballs1981
Жыл бұрын
Thanks for sharing
@TonysTractorAdventure
Жыл бұрын
Thanks for watching! I appreciate you.
@goldenrule1027
Жыл бұрын
Excellent video, Tony. You demeaner comes across as honest, practical and down to earth. You dont hesitate to complement the people who work with you. I like that. Inspiring in many ways. Keep up the good work.
@TonysTractorAdventure
Жыл бұрын
I appreciate that!
@HamiltonvilleFarm
Жыл бұрын
Looks great
@TonysTractorAdventure
Жыл бұрын
Thanks!
@kevin_raney
Жыл бұрын
You can put down a garage epoxy system instead of leveling compound if the finish bothers you.
@TonysTractorAdventure
Жыл бұрын
Good idea
@daningle2250
8 ай бұрын
Newcrete by Rapid Set.
@Sword-Shield
Жыл бұрын
The 🐕 dog was a great foreman / supervisor ! 🤣👍🤠
@TonysTractorAdventure
Жыл бұрын
Gizmo is in charge.
@Sword-Shield
Жыл бұрын
@@TonysTractorAdventure Hahahaa ...👍🐕💯
@anitablair6396
5 ай бұрын
My 6x4 shed arrived with NO INSTRUCTIONS!!! Some dents…. Your video helped a lot. I would have liked more close up clarification on parts installation!!!
@TonysTractorAdventure
5 ай бұрын
Glad it helped!
@Bodhranarama
Жыл бұрын
Everyone could use a smart wise unstoppable John in their corner! Thanks for posting. PS I have no name for that material but it isn't what we call crusher run, looks useful though.
@TonysTractorAdventure
Жыл бұрын
John is so awesome. Great guy.
@Bodhranarama
Жыл бұрын
@@TonysTractorAdventure Just noticed you skipped over 75k! Congratulations folks!
@TonysTractorAdventure
Жыл бұрын
That is cool. I really didn't know. I don't keep up with it. Thank you for being one of our best supporters.
@tdlin1721
9 ай бұрын
Tony: Excellent video and I learn a lot from your tips. Your build is very solid especially by screwing nails down to concrete from the frames which should be able to prevent the shed to be blown away by strong winds. This is one of my major concerns from living in Houston, Texas area. Because of the concern I bought a Patiowell, the same company as yours, 8x6 FT Wood Look shade from this Black Friday sale. My reason was that it has more vertical steel bar supports from the bottom frames in the back and sides with horizonatal panels which I thought being able to give more structure supports from only the weak side sheet metal panels. Based on your video, I don't need to worry about it which surprised me as an engineer. Because I am a retired old man with my wife as the only helper, I had tried a simpler and lazy way, learned from the other KZitemr, to build the foundation. I had used 1'x1'x1.5" concrete step stones above 1-2" top soils in a few motnhs ago. Now is the time for me to build the shed on the top of the foundation. After viewing your video, I became hesitant if my foundation is good enough to maintain the level which will eventually make the doors and structure to function incorrectly. I am at a critical point to decide if I should build it on a concrete foundation like yours or get by with step stones. What is your opinion?
@TonysTractorAdventure
9 ай бұрын
Mine has held up very well. I recommend a concrete floor. It is harder, but better for the best results.
@user-scooter1965
Жыл бұрын
It's nice to have a couple yard pile of gravel around for small projects or filling in low spots in a gravel drive.
@TonysTractorAdventure
Жыл бұрын
I agree.I need to keep a pill of gravel.
@owenhobbs3827
Жыл бұрын
I grew up in west Tennessee and we always called that gravel chirt or chert (not sure how they spelled it).
@TonysTractorAdventure
Жыл бұрын
Same here, but it's not really the correct name. I have had people lining up to tell me it wasn't chert in another video. Us West TN boys got to stick together.
@da1shark
Жыл бұрын
I built a shed like that over 30 years ago for my mon, it is still standing. The door has some rust on it, but it held up better than I thought it would.
@TonysTractorAdventure
Жыл бұрын
I beefed mine up on the inside by using spray foam and a OSB
@danwilkening888
Жыл бұрын
Great job as usual Tony. I totally understand that the pad would bug you. I also would be tempted to rent a grinder/polisher to make it better myself.
@TonysTractorAdventure
Жыл бұрын
I am funny about these things. I think I will coat it. It will be nice.
@ronaldharmon9891
Жыл бұрын
Tony I think it's GREAT that you're building yourself a DOG HOUSE so when you don't follow Taynya's instruction that you have a place to live, thinking ahead👍 Great seeing you on other videos like Brock and Tim at the Farm Show.
@TonysTractorAdventure
Жыл бұрын
You know the deal. I am going to insulate it too! I love being at the show. Such a good time.
@ocd7036
Жыл бұрын
Beautiful property
@TonysTractorAdventure
Жыл бұрын
Thank you
@genegreear4183
Жыл бұрын
Good job Tony. I think it will work well for you.
@TonysTractorAdventure
Жыл бұрын
I think so too
@20mcarroll02
Жыл бұрын
What most people say crush and run, they are thinking of 33c or limestone base. What you have looks a lot like the stuff you get up between paris and Springville. Looks like river rock red sand and clay mixed....and it does pack really good.
@TonysTractorAdventure
Жыл бұрын
I have been using it for all my projects. The cost is fair too.
@20mcarroll02
Жыл бұрын
@Tony's Tractor Adventure Homestead yeah its usually cheaper than chert near you, dont really get into much chert till you get to the river or down towards camden. And definately cheaper than any limestone rock. I haul mainly rock, sand , and clay.
@lorenmeyer5290
Жыл бұрын
Looks great you guy's! God Bless y'all!
@TonysTractorAdventure
Жыл бұрын
Thank you! Good Bless you too. We get mean comments from time to time. I just read one and I was thinking about responding. I glanced down and saw your God Bless. Your comment changed my course today.
@robertwinton2649
Жыл бұрын
A very nice storage shed I like it
@TonysTractorAdventure
Жыл бұрын
Thank you.
@patiowellus
Жыл бұрын
Looks great and very clear instructions🥰
@TonysTractorAdventure
Жыл бұрын
Thanks so much 😊
@Booty4days
Жыл бұрын
I bought 4 Arrow 8ftx10ft Metal building just like your 8x6 and I only paid $259 each and got a instant $50 mailed check for each building so basically I only paid for 3 of them total for $600 plus tax and materials to frame the base altogether I spent $1000 total and built a 35 3/4 X 38 total once I put it together the way I wanted and I use T19 Wood siding also I did it in 2 days
@TonysTractorAdventure
Жыл бұрын
The price I listed was for everything including concrete. I am spraying insulation today. That will add $300 for the kit.
@Booty4days
Жыл бұрын
@@TonysTractorAdventure That will be Great for those type of buildings especially if going to spend any real time in it or have property in storage that’s worth anything once ready for it again
@davida.p.9911
Жыл бұрын
That's a nice little shed! Great work everyone! Do you think it could be wired for electricity? Thanks for sharing, Tony! God bless! 😎
@TonysTractorAdventure
Жыл бұрын
I hope so! 🤣 I am putting all my solar electric systems in it. 😇
@john_Caji315_adams
Жыл бұрын
Thanks for the Video... very good job y'all did in getting that shed up. I was just planning on using 2x4's ( 2-8 ft. ones and then 7-6ft. about 14" apart) & use 2 sheets 3/4-in x 4-ft x 8-ft Industrial Particle Board) as my Floor.. I'm 71 now and concert and I *NO* longer "MIX"...Lol... This will run about $100.00 & I have some creosote to roll/paint on all the wood .. I'm in eastern N.C. Since I'm hoping that 4 men can lift just the metal shed, if need be, once put together ( without the doors) and place it on the base about a 20''away from a outside wall on the back of the house, them mount the shed to the base. 20" may be enough anyway that it can go ahead and be built on the flooring..Any thing you catch I might throw me off so I shouldn't do it this way?? Thought maybe 4 screw type anchors in small holes with little quick set concrete would be ok to hold deck securely.. Maybe even 2 ft. of the back wall of the house just to be sure no roof water from the house get over onto the shed roof... I see Patiowell has a nice 8x6 with sideway fitting panels now looking like weather boarding for a house. believe it's their "【Limited Edition Package】8x6 Woodbridge Metal Shed" $549.00 with a 10% discount code from "Deep South Homestead" (Danny & Wanda on YT). Real nice looking wooden/metal shed.. Heavest thing i'll have on the floor is my Racing Go-kart...& a Pulsar 5,000 watt dual fuel inverter/generator neither over 125 lbs. Only reason trying to get out of that concrete work is 1) don't have a Truck, 2) don't have a Mixer.. Last time I did concrete mixing in a wheelbarrow (48 Bags of it) the 2 guys with me bout walked off...Lol... Again, thanks for your Video... I know I should have stayed on my Place up in The East TN. Mountains especially with things looking like they are these days... If you see anything I might be overlooking would appreciate any help.. Have a Blessed upcoming Weekend.... Nice Place You Have There....
@TonysTractorAdventure
Жыл бұрын
Concrete is getting heavier!
@garyjohnson4458
Жыл бұрын
Gravel looks like what we call shurpack here but different areas have different name for stuff
@TonysTractorAdventure
Жыл бұрын
That's right. It works, so I guess that is all that matters.
@j.j.maaskant7287
Жыл бұрын
After seeing ya build that green house this little shed looks like the first straw house of the three little piggies. Waiting for the big bad wolf to blow it apart. 😉
@TonysTractorAdventure
Жыл бұрын
The wolf failed.😁 Little shed went through 80mph winds.
@garybarkley2286
Жыл бұрын
Ya can rent a machine that will grind the top and make it like I think what ur looking for it works somewhat like a floor buffer it’s not a hard machine to use might be something to check out
@TonysTractorAdventure
Жыл бұрын
I will look into that.
@gckshea
Жыл бұрын
Pushing dirt with curl cylinders extended. Yikes. Was that it? 😆 The 3/4" minus granite that we knew from living in Oregon is called "caliche" in Texas - limestone. It is called Crusher Run in Tennessee, but has many different DOT classification numbers elsewhere ‐ 411, 2A limestone, #5, "Road Bond (ABC), and who knows what else. It all depends on the area, and the local vernacular. Makes it confusing to know what's available. Great video Tony and Tanja
@TonysTractorAdventure
Жыл бұрын
Thousands of hours and 40 years working without bending a cylinder or loader. Think of your finger. You can push a pencil across a table with the tip of your finger; however, if you stab your finger into the wall, you will break it. It is a learned skill.
@gckshea
Жыл бұрын
@@TonysTractorAdventure I was guessing your question if we viewers spotted anything. It was a shot. I understand skill and experience allows pushing extended curl cylinders.
@tdlin1721
5 ай бұрын
Tony: Finally, I paid a professional to install a 8'x6" concrete at a cost of $700. However, I could not install the shed until now because I had to work a more emergent project to fix my pool underground PVC leak. After reviewing you video again. Please help me on the following two questions: 1. You install the concrete screws in the very beginning. Could I install the concrete screws after the shed is built? 2. My shed will be on a slope that water will drain through around the concrete during rains. You put the silicons around the bottoms of the sheds to prevent water from getting into. However, if my shed having certain possibility for water getting into, then I should not put the silicons under the low sides for water to drain. Is this correct? Thank you so much for sharing your important tips and helps!
@TonysTractorAdventure
5 ай бұрын
I wouldn't recommend putting the concrete screws in last. The slights gust of wind will take it off. I don't have a water problem, but I put silicone under it for blowing rain. You can never stop direct water. It will find a way.
@tdlin1721
5 ай бұрын
@@TonysTractorAdventure Thank you! I did not consider the gust of wind would take if off position.
@khiaraslaw
Жыл бұрын
Any suggestions for a wood base/platform to put one on?
@TonysTractorAdventure
Жыл бұрын
I treated lumber base would be fine and would last for many years. Obviously it wouldn't last as long as concrete but it may still meet your needs.
@bretmoore4988
3 ай бұрын
we call it sand clay gravel
@TonysTractorAdventure
3 ай бұрын
yep, that is a good name for it.
@jimenezlo-fi6211
Жыл бұрын
Ty sir, I was wondering if you had to force the screws on the top side rails? I purchased the same shed, my side top rails do not have pre-holes.
@TonysTractorAdventure
Жыл бұрын
Mine had a slot all the way across.
@jerzeysfynest689
Жыл бұрын
Do you think it would be simple enough to build this it into an 8x5 shed with a little custom work?
@TonysTractorAdventure
Жыл бұрын
I did. I use it to house all my solar hardware.
@Z-Ack
Жыл бұрын
450$? I paid 275 for a 8x10 metal shed with same design.. i ended up telling amazon it was missing pieces and got the manufacturer to send me another box with more of the sides and roof and ended up building a 10x12 shed.. lol. Did end up spending 100$ on gravel delivery and 50$ on concrete so i guess i did end up at the 450 mark..
@rhondarevaa6461
Жыл бұрын
How do the beams go on the start of the roof we are sooo confused right now help
@TonysTractorAdventure
Жыл бұрын
To go back to back in the center top and then one goes to the right with the top angle to the right and then one goes to the left with the top angle to the left.
@rhondarevaa6461
Жыл бұрын
@@TonysTractorAdventure I think we started off not level. .he said it was but everything seems crooked now he just wants to do his own roof. Or tear it down and throw it out in the road lol
@anoob4real395
Жыл бұрын
Y’all showed someone putting plastic washers on the screws when you should of showed us the top framing.
@TonysTractorAdventure
Жыл бұрын
We owe you nothing at all. Sorry you felt we did.
@camaromodschannel
4 ай бұрын
That's nothing, I had a 22x22 Garage framed up ready to pour the next morning, a major storm came throuth that night and flooded my footings , my concrete was so wet Yes we poured it any way. and I had a power float and it did no good it was still to wet by the time i had to take it back. when I was taking the machine back is when i should have power floating it.
@stanwebb3480
Жыл бұрын
Just one Question: Why is the door not facing the big building??? In case some one in the big building has to communicate to the another person in the shed and vice versa!!! Oh well, You know best!!!!
@TonysTractorAdventure
Жыл бұрын
The big building will be enclosed. The small building is facing this way based on future plans.
@gordselectronicshobby3853
Жыл бұрын
A building without a frame is not a good idea.
@TonysTractorAdventure
Жыл бұрын
That is like saying a car without a frame is not good but yet it's been proven over and over again. I don't have any real worries. My building went through 80 mph winds and is fine. Our neighbor had a wooden structure that was blowing away. It had a frame.
Пікірлер: 93