Noctua now makes black fans. They are called 'Chromax Black' really wanna do something similar to this but I'm gonna wait 1-2 builds before I try petg. Great video
@Coolarj10
4 жыл бұрын
Wow! Thanks for sharing! This is great news, and I’m sure others will love to know, so I pinned your comment!
@duttiee
4 жыл бұрын
Arjun Mehta why did you stop uploading?
@Odin3v
3 жыл бұрын
I have 5x140mm chromax black fans and they are awesome. Best fan purchase I have ever made.
@BlatentlyFakeName
3 жыл бұрын
You should really use static pressure fans on radiators, also try to have them pulling through the rad rather than push. That way you don't get air rebounding back in to the case so it's more efficient. Having a rad at the bottom of the case means you're heating the pipes and reservoir up as well. So everything will be running at higher temperatures.
@jm_sc
2 ай бұрын
What does petg mean
@dwilburify
4 жыл бұрын
How did I manage to watch this entire video without an ad? Thank you and awesome video!
@yournotgully
3 жыл бұрын
basic requirements: 900 thousand dollars, a PhD in engineering, 7 years free time
@hanswurst2220
3 жыл бұрын
not true at all, but funny
@axymeh
3 жыл бұрын
Heh
@Rubiks__cube__kid
2 жыл бұрын
Frfr
@AntisepticHandwash
2 жыл бұрын
This is honestly the best primer on liquid cooling I've seen. Concise, to-the-point, and sufficiently thorough. I feel like I have an excellent starting point to research from, and also feel much more confident in undertaking the task. Thank you!
@paulmitchell2177
4 жыл бұрын
Absolutely the best how-to for beginners that I have seen, and I've looked at hundreds over the last week or so. I've been building, both for personal and professionally as a custom builder since the "Personal Computer" was introduced in the 1970's, so I have a TON of experience with hardware and software, but I am attempting my 1st Liquid Cooled system, and am understandably leery of running LIQUID through a boxed enclosure containing $2000 worth of ELECTRICAL COMPONENTS! (as I have told my wife Many Times over the years: Water and Electronics::NOT GOOD BEDFELLOWS!) So THANK YOU for this. I am subscribing immediately. Very concise yet detailed, PERFECT
@Lucas-sk5lu
4 жыл бұрын
How did it go??
@jamesamericanmeat9388
3 жыл бұрын
This is one of the best youtube videos I've seen ever. You: - Use object names - Explain steps - Explain rationality behind decisions - Offer other ideas within scope that don't interrupt the flow of the video Great vid
@Fsnoppg
5 жыл бұрын
One of the best videos i've watched on KZitem. The details are accurate , you deserve more suscribers. Thank you for your videos wishing you good luck on KZitem.
@etienne.larche
4 жыл бұрын
Exactly what I was thinking too
@atomicprogrammer9019
4 жыл бұрын
Tech source is better
@iATH8k
4 жыл бұрын
you are right
@Sciron
4 жыл бұрын
me before this video: Man it would be so cool if I watercooled my pc me after this video: eh nevermind
@killeratj.7025
4 жыл бұрын
That is exactly what happened to me
@Sciron
4 жыл бұрын
Killerat J. Lol
@Cheesehead302
4 жыл бұрын
I'm building my first PC, I think this definitely helped me realize I don't want to water cool. It was a good video, though. I would hate to invest a ton of money and then have my components get ruined from a leak
@bestcity0979
4 жыл бұрын
Lol same
@dominicdo2719
4 жыл бұрын
My thoughts exactly
@chris977s
4 жыл бұрын
Me: Okay, just one more exam and I'm done for the semester My Last Brain Cell: 4:28
@jonboy2950
3 жыл бұрын
Terrific video and extremely helpful for people setting out to do this for the first time.
@dellrizlonian
5 жыл бұрын
As I've been planning a custom loop in the NCase since seeing this video, I find myself coming back to watch this video often. Super informative and well done tutorial, invaluable.
@jollyrogerhobbies2386
3 жыл бұрын
This video solidified it for me. Not doing water cooling. This will be my first build and thought water cooling would be so cool! (pun intended) Turns out. It may run cool and look awesome if done right, however the benefits do not justify the cost, the effort and the potential part failure. That money is better spent in higher end components. After all I am NOT building a $5000 computer. (I totally would if I wasn't on a budget) Besides, computers are suppose to be replaced every 3-4 years. I am SOOO not doing this that often. I understand some people believe computers are like art work and people sure display them as such. However unlike real art work, Pretty computers DO NOT gain value with age. I am trying to keep this my mind and tell myself, Function over form. Afterall, what good is a pretty PC than cannot do the JOB I need it to do. No sir, my limited money is better spent elsewhere. I in no means am being derogatory to those that have a different opinion as me. I am just saying, it isn't for me. Thank you for the wonderful video OP and the hard work put in it. To all those out there who choose this way, my hat is off to you and I wish you the best.
@Coolarj10
3 жыл бұрын
Jollyroger Hobbies I think you have made a completely fair assessment, and if this video helped you confirm that then I’m glad. The goal was to paint an accurate picture of the effort involved. Now that I’ve done it once, I can’t imagine myself doing a custom hard tube build for quite a while even though it looks really cool. The one benefit that I really like about water cooling is the quietness of the PC. That’s particularly useful when you are recording on a microphone nearby or simply don’t want to be disturbed. So, the next time I build a PC I think I’d use an all-in-one loop (e.g. Corsair h100i) which has the benefits of water cooling but doesn’t require any of the custom pipe bending or connections and fittings. Good luck on your first build!
@jollyrogerhobbies2386
3 жыл бұрын
@@Coolarj10 Thank you. Good luck on your next build! noise really isn't an issue for me as I wear head phones and any recording is done in another room. If I have conference calls then my headset mic works perfectly to cut out any background noise. I know this because I have a loud house fan at my feat to keep me cool in the summer time and they cannot hear it, lol!
@Tropical_Campville
4 жыл бұрын
The most easiest and most entertaining video I've watched.
@xthebigZ25x
3 жыл бұрын
I love the compactness of this PC. Things that take up less space is one of my biggest OCD problems/satisfaction.
@MineThatCraft69
3 жыл бұрын
Out of all the vids I've come back to for help during this project, this was the one I found most helpful. Appreciate it bud
@crabdash7288
4 жыл бұрын
a perfect mix of comedy and clear cut information, thank u very much kind sir :)
@junsean2094
4 жыл бұрын
How can you only have this less subcribers?! Your tutorials are amazing bro !! They were quite easily to understand and to follow! :D
@mopnem
4 жыл бұрын
Great vid. Went through steps, showed examples of things, kept it fun & light & no unnecessary talking points, unlike some other people. Always nice when you get people that make processes easier.
@fortnitefunnyguyman6077
5 жыл бұрын
This was my first pc too. Thanks a lot. Your guide really helped.
@wiscothrills1409
3 жыл бұрын
Wasn't expecting Batman to explain the parts you need for a PC but I am pleased
@R1K0666
3 жыл бұрын
I thought this was gonna be way harder but after watching this, it's really simple. Thanks for this.
@Synthematix
3 жыл бұрын
One thing ive learned is never over pay for watercooling parts the cheap parts are as good, trust me on that one.
@diciples9366
3 жыл бұрын
what brand do u suggest?
@Shxine
3 жыл бұрын
@@diciples9366 🤣
@bigbyrome
3 жыл бұрын
@@Shxine how helpful of u
@Shxine
3 жыл бұрын
@@bigbyrome how helpful of you replying to me instead of that guy
@hammyboigaming904
3 жыл бұрын
Except for the pump.
@gmvq3059
4 жыл бұрын
I don’t even have a pc, I play on ps4 it’s been 3 hours since I started binge watching pc builds ANDDDDDDDD I decided I’m gonna get a water cooled pc 🤗
@whydidipickthename7413
4 жыл бұрын
gmvvq fn, do you have over $2000 for it?
@gmvq3059
4 жыл бұрын
WhyDidIPickTheName? , Yep my budget is $4000-$4500
@1.3mviews64
4 жыл бұрын
@@gmvq3059 holy shit you're lucky, my budget is only 1500 :P
@CRAZYFLARE123
4 жыл бұрын
gmvvq fn so u getting o God pc
@gmvq3059
4 жыл бұрын
Yeah but in my country everything is so expensive
@MrGizzyborn
3 жыл бұрын
I have been looking for a video like this for ages ! Thank you so much ! This was so no bs stuff ❤️🤌🏼😘
@harshalrajput5333
Жыл бұрын
damn so thought out and detailed dont delet this as i am saving it in my pc build list
@preetjohal8252
5 жыл бұрын
Wow, this was a great video! Very informative and easy to follow... even for us noobs.
@jakeboice5119
3 жыл бұрын
Bro thanks for the tutorial, I was really getting confused, and I am confused on the topic that why are you on 1k subs?, cause you are the first person I saw who does this things by creating it in funny way
@EliseAndrada
2 ай бұрын
I know this tutorial was uploaded for awhile now but damn I enjoyed every minute of it. I'm doing my research on liquid cooling systems to be used into other things 😅 thank you!
@Coolarj10
2 ай бұрын
Aw thank you! I hope it was helpful!
@GoodGuyHD-mu6qe
5 жыл бұрын
Excellent videos--both in information and production--respectful of the viewers' time. I'd bet that the video production took more time and effort than the PC build. Thanks for sharing your great work!
@teflonteddy5512
3 жыл бұрын
The best guide I’ve seen on KZitem. Thanks for your upload!!!!!
@aaronjosephtecson5639
4 жыл бұрын
Great tutorial! Love every small details you provide. Will try to do this hope it works since I'm a beginner.
@iamamish
3 жыл бұрын
Fantastic (ha) job. Watercooled PCs have a great aesthetic, but personally I'm too worried about leaks.
@rubenm3919
2 жыл бұрын
I’m super late to the PC party but I really want to water cool my CPU & GPU! it’s videos like this that are gonna push me to do it! my biggest problem has just been being so indecisive about which brand to go with for a distro plate and gpu block! amazing video!!
@NewbergUSA
3 жыл бұрын
Really nice job on both the video and your cooling implementation. Among the best I have seen. Not too long. Very direct with No unneeded chatter. A little humor. Thanks.
@FakeLibra
4 жыл бұрын
You’re the best! I’ve downloaded this video to reference it whenever I have enough money and courage to buy all these parts and finally assembling my first PC):
@FakeLibra
4 жыл бұрын
Novitrix thank you!
@PandaPotPies
5 жыл бұрын
Wow beautiful build and very informative video
@igorzatsarevnyy5394
4 жыл бұрын
Great one. Thank you for creating the video. Though a majority of people will not walk this path of struggle and will just pay for assembling.
@chillbro2275
Жыл бұрын
I am 100% certain that following every step you included that I will have a working, liquid-cooled machine.... But DAMN that's a lot of stuff to do.
@volt5232
3 жыл бұрын
This is an amazing guide to help learn how to watercool but also how it works. still the best video for this late 2020. thanks a bunch!
@alexanderpak9810
4 жыл бұрын
This is the best tutorial I ahev ever watched
@MillzyIsHd
5 жыл бұрын
Great video dude, very informative and humorous at the same time. Going to be setting my first watercooling loop up this afternoon
@Coolarj10
5 жыл бұрын
MillzyIsHd awesome! I hope it is going well! Would love to see a picture on the reddit r/watercooling forum!
@jm_sc
2 ай бұрын
Awesome tutorial, doesn't seem hard to put the pieces together, but the stakes are really high! I'm still struggling with the picking and buying parts step 😂
@sleelakrishnan
4 жыл бұрын
Arjun Mehta You Did A Great Job Bloke 😉
@blatantstriker
3 жыл бұрын
He was a really good indian named tech youtuber hope he'll make more videos
@refraysmusic
4 жыл бұрын
How do you still have under 1k subs? I assumed you already had 100k+ with your production quality!
@MNDooD
4 жыл бұрын
Excellent video. I've watched a lot of how-to videos, but none were are easy to follow as yours. Nice work!
@iquitgaming1813
4 жыл бұрын
that helps me given an idea how to custom liquid cool my itx build.. great video, easy to follow i guess..
@jonnylpenman
2 жыл бұрын
"9 Easy Steps"... Great video. Would be easier if I worked in a laboratory and had a degree in engineering
@air2farce
7 ай бұрын
What a Great Video! It just so happens that the content was intriguingly captivating! What an enjoyable experience! Thanks Very Much for Sharing Bro!
@Coolarj10
7 ай бұрын
Thank you for such kind words!! 😊
@MagicAmmo
3 жыл бұрын
Very helpful video particularly for those who are new to custom loop liquid cooling.
@orce
4 жыл бұрын
@7:13 You put the NVMe drive without a standoff screw?
@bamsuth9650
3 жыл бұрын
bend baby bend
@lawoftheuniverse8089
3 жыл бұрын
Very Impressive Bro...Congrats on your Build !!!
@nathanaelhowe6914
3 жыл бұрын
Hey man. I really dig your video and appreciate your honesty and humour! I'm about to dig into water cooling myself and this was helpful!
@LaughVEVO
2 жыл бұрын
Awesome tutorial.. the best one on KZitem!
@nicholasgeorge6367
Жыл бұрын
Dam bro!! U made me found love in first sight i am gonna build me one of these thanks for the time and share l9ve it.
@mochalatte7564
4 жыл бұрын
I would also recommend leaving paper towel where the tubes can wiggle out for a couple days when playing to make sure there’s no leaks
@dt9233
3 жыл бұрын
Wow i can't believe you went about doing all those trick curves for the water cooling... I watched closely because I'm stuck at a inlet and outlet issue from my water loop. My fitting are in a somewhat awkward place for the return to the front second radiator then to back to the reservoir after the full run through. I'm gonna try at it again today yesterday i went through two new tubes on this 16mm od 12id and that was so irritating and i called it quits and went to sleep...It was late though so I figured i was messing it up because I was frustrated. any tips how you were able to bend alot of that tube itself without pausing when you did that wavy loop.... I was pretty impressed.... I'm not to brave to try it like that i don't feel my skills are that great .. I didn't see you use a metric ruler or a measuring strip... So i'm gonna have to say you have some mad skills at it and probably you are just a natural some that just look at it and can just make it after looking.... So any extra tips on bending for that period of time and when should or how should the heat be applied to cover alot of the length of the tube... Hey if possible can ya and visitors help give our KZitemr neighbor hood friend a shout out and some subscribers ..... Trying to help her/ them out during covid shes hasn't worked now for almost 1 year and worked remotely but that job ended and she hasn't been able to get a normal job in her field so still a loss of income.... So i told her about KZitem. The family are kinda having a rough time financially . So any help you can send to her channel will help her for sure.... Her channel is kzitem.info/rock/bNPvhY-2uCfsBHmcRCGV2A Great Job!!! With the bending .. Also please remember to offer some tips ;-D
@CarlitoSuperLobo
4 жыл бұрын
Exceptional video. Great looking PC. I've been inspired by you, I hope I can muster up the courage!
@Coolarj10
4 жыл бұрын
Carlito SuperLobo you can do it!! Once you get started, it won’t feel as daunting.
@hank01000
Жыл бұрын
Detailed but wow that’s all so much I’ll buy pre build and work on it from there
@njjx8800
4 жыл бұрын
I saw your build on amazon under a review. Nice work.
@CyTaux
2 жыл бұрын
Awesome video I wanted to learn how to bend them and this was very good explaination
@MadhanKumar-fv5qo
4 жыл бұрын
u r channel Is The most underrated channel i have ever seen. btw Love the video bro!!
@buicktothemoon
3 жыл бұрын
So, yeah, don't you think connecting all power cables, and then using the Jumper without disconnecting the cpu cables is a bit dangerous? You should have nothing else connected to the psu at that point other than the bridge and the pump.
@not_hungry2563
4 жыл бұрын
Wow your videos are super easy to understand
@jamieb0nd
3 жыл бұрын
Absolutely excellent tutorial! Thankyou 👍
@gm2407
3 жыл бұрын
I know the 80's is popular, but I didn't realise it was compulsory for a liquid cooling PC to look like a 1980's Mad Scientist's Laboritory. But seriously well done on the effort of putting that together snd getting it all to work. I note that the bends in the piping allow for more water in the system, but also for the water to travel to travel further before reaching the GPU or CPU. In a smaller case if the air temprature is warmer this might mean that the water temprature is not optimal upon reaching the item to be cooled. With that in mind what were your tempreture ranges?
@DT1510
4 жыл бұрын
How did you measure the length of tube needed from one point to another? especially with all the bends and loops?
@Coolarj10
4 жыл бұрын
DT1510 good question, sorry I forgot to address this in the video. Similar to how I measured the length of the cables, I used some string to ballpark the length of the tubes by holding the string in approximately the same shape the tubes would be in. Then, cut a piece of tube than is longer than you think you need so you have some margin to work with. When bending the tubes, it is an iterative process of trial and error. Push the tube into one of the fittings and get an idea for where it needs to start bending. Now pull the tube out and start bending that part of the tube. Put the tube back into the fitting and see if you got it the way you wanted it. If not, bend it a little more the way you want. If the tube gets so badly warped that you can’t fix it, cut a new piece and try again. If you bent it correctly, then move onto the next part of the tube you want to bend, eventually working your way to the other end and making sure that the tube fits snugly and pushes in all the way into the fittings on each end. This is why it’s important to cut the tubes a little longer than you think. It’s easy to use the tube cutter to slightly shorten the ends of the tubes until they fit properly. But if your tube is already too short, you have to start over with a new tube. I wasted my fair share of tubes in the early stages and got better over time. In fact, for every tube you see in my build, I think I had to start over and re-do every pipe at least once each if not more. But it’s fun and worth it in the end!
@DT1510
4 жыл бұрын
@@Coolarj10 wow, thank you for that detailed response. Definitely one of the most tedious parts of the build, trying to get the perfect angles at the right spot without it falling short from the connection. Especially here in Australia where the tubes aren't cheap. This video has helped me immensely, and can't wait to finish my build! Thank you.
@Coolarj10
4 жыл бұрын
DT1510 glad it was helpful, and good luck with the build! While it is ideal to have more tubing on hand than you need in case of mistakes, don’t be afraid to repeatedly attempt to correct mistakes before ditching your tube and starting over. My really bendy tube in the front was challenging and I think I accidentally flattened part of the tube so it was no longer perfectly cylindrical. However, it is unnoticeable from the front and the ends of the tubes are still cylindrical and fit snugly, so it was fine. Actually that really bendy tube leaked twice during heavy gaming because the heat of the PC caused it to loosen during gaming a bit. I did not want to redo the entire pipe, so I wrapped blu-tac around the area where the pipe connects to the fitting to ensure it wouldn’t loosen. It is visible upon close inspection that i have some blue sticky material holding it together, but I was too lazy to try to re-do the whole pipe at that point. So, these are some things you can do to minimize buying additional tubing by improvising and adjusting the tubes you already own even if they aren’t 100% perfect.
@FrancisChong
5 жыл бұрын
Thanks, great tutorial!
@Coolarj10
5 жыл бұрын
Francis Chong thanks a lot! Glad it was helpful!
@JohnnySR15
5 жыл бұрын
Amazing tutorial! Bro, I have a question, how many fittings should I buy? I'm not sure if with 5 I'll be OK. For now, I'm just watercooling my cpu in a Phanteks Evolv X ATX.
@Coolarj10
5 жыл бұрын
Johnny S. R. Thank you! First let’s count the bare minimum number of fittings you need. To do that, let’s think about how many pipes you will have: Pump/reservoir combo->radiator->CPU waterblock->back to Pump/reservoir combo. For each pipe, you need TWO compression fittings (one goes on each end). The compression fittings are what help the pipe attach to your components, so you need one compression fitting on each end of the pipe. Your loop will need 3 pipes (denoted by the arrows -> ) and therefore you need 6 compression fittings. However, you may find that you will need 1-2 extender fittings to help your compression fittings fit into the pump/reservoir properly. You may also be interested in buying a flow indicator (the spinny thing which looks cool but isn’t necessary), which will require you to buy an additional adapter fitting (such as a female to female fitting). So, I would recommend you start by buying 6 compression fittings, and as you’re installing the pipes, feel free to buy additional fittings as you see fit! (haha!). The good news is you can get some fittings within 1-2 days from Amazon, or Fry’s electronics has some in-store. Or, you could buy some of the same extender and adapter fittings I bought (see my PCpart picker link) and return them if you don’t end up needing them. This way you don’t have to delay your PC build if you have a missing part. I hope this helps!
@JohnnySR15
5 жыл бұрын
@@Coolarj10 thank you so much for answering my questions! You are the best.
@JohnnySR15
5 жыл бұрын
@@Coolarj10 in addition, I realized that I'll add another waterblock for my GPU🙉🙉 Sorry for bothering you that much... Should I buy another radiator and another 6 extra fittings or what do you think?
@Coolarj10
5 жыл бұрын
@@JohnnySR15 Haha awesome! No worries, let's work through this. I do recommend you buy another radiator. Let's draw a new diagram for your new situation to find out how many pipes you have, and from there we will find out how many fittings you will need: Pump/reservoir combo->radiator #1-->radiator #2-->CPU waterblock->GPU waterblock-->back to Pump/reservoir combo. So, you will now have a total of 5 pipes, and therefore you will need 10 compression fittings! One more thing: You don't have to have the pipes connect in the order I described in the diagram. Any order is fine, that was just an example. The order does not matter, it's just up to what is easiest for you or whatever you think will make the pipes look the best. Good luck!
@JohnnySR15
5 жыл бұрын
@@Coolarj10 thanks man, your awesome.
@Zombie_13x33
2 жыл бұрын
The movie trailer voice was great man. In a world.... one man.... and his computer...... lol
@bchandruu
3 жыл бұрын
I learned so much. You deserve more subscribers- thank you so much. Just subscribed
@wedgie502
4 жыл бұрын
WOW!! Very beautiful build!! Thanks for the informative video.
@gho5t1fy45
3 жыл бұрын
Im going to watercool my max performance pc im getting the build no watercool is abt 6k. Then im going to watercool it i cant wait to stream i gotta get a few more paychecks tho lol
@vijaynagalla3989
4 жыл бұрын
pretty sure,he is gonna hit 1m subscribes soon
@ROADHouse702
3 жыл бұрын
that outro music reminds me of that one old KZitem tutorial song: **Trance - 009 Sound System Dreamscape**
@ancai6566
3 жыл бұрын
Hello, my water cooling stopped looping after cleaning dust.. How to start them again sir? Thank you..
@livinglogic
5 жыл бұрын
Loved the video Arjun, very well put together. I do have 1 question for you though: given the opportunity to build another water-cooled computer like this, what would you do differently the next time around? Thanks for sharing your work!
@Coolarj10
5 жыл бұрын
You’re the first person to ask that - what a great question! I spent some time thinking about it and I’ll let you know if I think of anything else, but here are my initial thoughts: +Next time around, I may not care to screw custom holes at the bottom to fit the radiator. It’s too much of a hassle, and I think you can fit the radiator naturally by bending or shaving the thick usb cable. I was just being paranoid. +I would consider not putting the fan filter under the bottom fans. They may prevent dust from entering the PC case, but reduce airflow. I would need to test this to see if it is worth it, but it might be worth it to remove the filter for the sake of better airflow. I’m curious how much of a difference this would make. +I would instead get a Motherboard with 2 or more M2 slots instead of just 1 M2 slot. No such thing was available when I built the PC in a mini-ITX form factor, but now they are! This allows expandability for more storage as your PC fills up. +Now that I have more experience, I will definitely be faster at bending the pipes, and I’ll be sure to make sure they are super snug and tight without a doubt. They leaked 2-3 times on me while my PC was already working, and eventually I learned that the pipes really need to be pushed in all the way in and pushed in straight. If they are slightly angled, they can slip out when the Pc heats up. +Next time around, I might not care to flush my components as thoroughly. I would probably just get a bit of water and shake them a few times. Vinegar is probably an overkill but I can’t confirm. I’ll let you know if I think of anything else. Great question!
@FatKidWitAJetPak
4 жыл бұрын
Is it really necessary to learn my water-cooling components? Ive already attached my radiator lol.
@Coolarj10
4 жыл бұрын
FatKidWitAJetPak hey did you mean “is it necessary to clean”? I don’t think it is absolutely necessary. If I did this build again, I would probably skip the excessive cleaning and just rinse each component out with water once or twice by shaking it. The tiny debris is probably not a big deal, mainly big chunks are what you don’t want so they don’t damage your pump.
@FatKidWitAJetPak
4 жыл бұрын
Thanks, I decided to just clean my radiator.
@akshaymishra3572
3 жыл бұрын
Hi arjun this is akshay loved your work the build you have done please do a tutorial on a external liquid cooling loop for cooling a cpu plus liquid cooling a SLI graphics set up best wishes 👏👏🤝🤝
@sohommallick110
2 жыл бұрын
You did the best sir! 👍😃
@merlinmahbod
Жыл бұрын
My man introduces pc parts as an action movie cast loooool im done
@Coolarj10
Жыл бұрын
HAHA thanks for noticing 🤣… I tried
@waseempervez1844
4 жыл бұрын
you deserve alot of subscribers
@ThatOne5
3 жыл бұрын
That is a really beautiful build man!!!!!
@sexyeyes6203
4 жыл бұрын
I will do this ...and include Aquarium inside ...of course ..I put Nemo too ...that will be fun !!!
@giannimaccario9571
4 жыл бұрын
Amazing video, accurate, straight to the point and fun!
@rowdirangan959
3 жыл бұрын
Great job Bro...
@buicktothemoon
3 жыл бұрын
Question: when using the bridge to disconnect the PSU from the motherboard so no other power flows through other than the pump, shouldn't you also disconnect the CPU power cable that gives extra power to the CPU, or can you just leave that in?
@Coolarj10
3 жыл бұрын
Hey, great point and good catch. That's something not explicitly mentioned in the video and overlooked. I agree that it would be better to disconnect everything except the pump. I'm not sure what power the PSU expects to deliver to the other components if left plugged into the PSU while using the jumper cable, so it is probably best to unplug everything. When I made the build in the beginning, that's what I did. On subsequent refills, I don't recall unplugging everything from my PSU. So, things have been working fine doing it either way, but the only way to be absolutely sure is to either unplug everything "just in case", or determine if the PSU could cause harm to components while using a jumper. Good observation!
@buicktothemoon
3 жыл бұрын
@@Coolarj10 thanks for your reply and clarification!
@buicktothemoon
3 жыл бұрын
@@Coolarj10 one final question. Is soft tubing less likely to leak because of the elasticity of it?
@itcheebeard
4 жыл бұрын
Isnt the flow I the diagram backwards? Wouldn't you want the hot water to go from cpu to rad to pump?
@ToxicFruitSnack
5 жыл бұрын
Question, what if i already have a complete build? Would i have to take everything out and re attach them all? I have an empty space on the right side of my pc and i was hoping in the future i could install some tubes in that area to fill up the gap but i don’t want to buy new parts for a whole separate build JUST for the cooling system
@Coolarj10
5 жыл бұрын
Hey! Sorry I missed your question for so long. Adding liquid cooling to your existing PC can be easy, especially since you already have a lot of extra space in your case. Whether or not you have to re-attach everything depends on your Motherboard. To attach the waterblock to the CPU, you typically have to remove the motherboard from your PC so you can attach the waterblock backplate (as in my video). This means you have to remove the motherboard and re-attach everything. HOWEVER, I have seen some modern motherboards that come with waterblock attachment points already on them, so you don't need to add the metal CPU waterblock backplate. If that's the case, then all you have to do is remove your existing CPU fan and replace it with a waterblock. Then, install a pump and reservoir and pipes anywhere you have free space. Lastly, you will need to attach a waterblock to your GPU if you want to liquid cool that, but that only requires removing the GPU, attaching a waterblock, and re-inserting the GPU. Good luck!
@ToxicFruitSnack
5 жыл бұрын
Arjun Mehta yes i have an ATX case, running with a rog x470. thanks for the response :) I’ll do some more research on this, my computer usually crashes now if i play higher end games... I’m thinking either my GPU or CPU gets way too hot. Lately i bought a cooling fan for my CPU but I’m not sure if that’ll fix the issue. I wish i could get a crash ID or something so i can do a quick lookup on google because right now I’m pretty much blind. Perhaps you could help? it happens a lot when i play games like overwatch. maybe it’s the engine the game uses... not sure. any help would be appreciated though. thanks again!
@Coolarj10
5 жыл бұрын
@@ToxicFruitSnack Hey - sorry for the late response! Were you able to fix it yet? If you suspect you have a temperature issue, you can install software such as HWMonitor. There are two ways to use it, you may want to use both: 1) If you have 2 PC monitors, you can play your game on one monitor and leave the HWmonitor open on the other screen so you can occasionally see how hot your PC gets while playing. 2) You may also (or instead of HWMonitor) use a software that actually logs the temperatures and stores them continuously into a file. I recall recommendations that "SpeedFan" is a software that can do that, but you can see what's out there that you like. This way, even after your PC crashes, you can take a look at your GPU temperatures in the log to see if it was really hot around the time your PC crashed.
@real_astrotard
4 жыл бұрын
Nicely done. I feel confident enough to make the purchase. Thanks for the tips.
@rafiahmed352
4 жыл бұрын
it was really amazing,,,,,,,,,,,,,, perfect complete tutorial for beginner setup
@cannedbeans1403
5 жыл бұрын
UnderAtedddddddddddddddddd like jeeeeeezzzzz
@mardon85
4 жыл бұрын
Epic build. My Ncase is on route!!
@abdelmoumenekirati6849
2 жыл бұрын
Great... I had so much fun
@assombro8205
3 жыл бұрын
Very good video, definitely deserves more views.
@uphill248
3 жыл бұрын
My PC radiator started to leak Right on my graphic card now my graphic card doesn’t work. Does anyone know if there’s a special tool to remove the fittings from the radiator?
@Nadzzz123
4 жыл бұрын
Really nice job! this looks amazing, and tutorial is so detailed. You def. had all the right tools for this and great knowledge.
@Coolarj10
4 жыл бұрын
Nadim Youakim thank you! It was quite a learning process.. all the tools I think I pretty much bought to build this PC (heat gun, pipe cutter, etc) so I put them on the PCPartPicker parts list as well.. but they have come in handy for future non-PC related projects as well!
Пікірлер: 495