Omg we were about to call technician because our water dispenser stopped working only to know that the hose got loosen up. Thank you!
@torontodiy
Ай бұрын
Glad to hear that 👍
@wildflame1000
8 ай бұрын
Thank your shearing. My dispenser didn't suck these days. After watch your video, I push tubes tightly to the joint, and it works. 👍👍👍
@torontodiy
8 ай бұрын
I’m glad. Thanks for watching
@DonCorleone-nz8ct
2 ай бұрын
Thank you!! I had the empty bottle flashing light I just pushed the line in and it’s fixed. Thank you again.
@torontodiy
2 ай бұрын
Glad to hear that 👍
@MicheleSmith-dj6vm
7 ай бұрын
Thanks so much! I thought I would need to buy a new one. So happy right now. Love my water cooler.
@torontodiy
7 ай бұрын
Glad to hear, and thanks for watching
@TseganeshAtsbeha
Ай бұрын
Hey thank you so much, after I watched your video I fixed mine after a few weeks. Thanks again
@SadeBurrell
11 ай бұрын
Thank you! You saved me over $300!!
@ShayeSells
5 ай бұрын
Thank you! This helped so much, I thought I had to buy a new one!🙌
@torontodiy
5 ай бұрын
My pleasure to help
@StephenMills09
3 ай бұрын
Thanks so much. Worked like a charm!
@torontodiy
3 ай бұрын
Glad it helped!
@meggiebee
11 ай бұрын
Thank you! I was so frustrated, and this did the trick.
@torontodiy
11 ай бұрын
Thanks for watching👍 pls consider to subscribe🙏
@user-jb6kv4fp2x
7 ай бұрын
Thank you sir! Very helpful
@torontodiy
6 ай бұрын
Glad to hear that 👍
@yunierkysvazquez7279
6 ай бұрын
Thank you very much sir, I fix the problem, have a great day always…
@torontodiy
6 ай бұрын
Happy to help
@lalix.trange5127
8 ай бұрын
Hii bro!!! My room temperature button does not expels room temperature water 😢, it expels cold water like cold button. (Mine is brand new.) That happened to you? Maybe mine is wrong? Or maybe a factory defect??
@95leefamilychannel33
6 ай бұрын
Thank you! I couldn’t figure out until I searched how to fix this! ❤
@torontodiy
6 ай бұрын
Glad to hear that👍
@janetteuy8771
Ай бұрын
Thank you! This helped me!
@torontodiy
Ай бұрын
Glad to hear that 😀
@user-cf4qx2ow3o
11 ай бұрын
I turn both switches on but the cold water still doesnt dispense, what else do you suggest
@jaybee1086
Ай бұрын
I have the same issue.
@robinn.361
5 ай бұрын
Thank you very much.
@torontodiy
5 ай бұрын
My pleasure 👍
@Josh-kp1jx
11 күн бұрын
The cold water icon keeps flashing and does not dispense cold water anymore could this be a filter issue? Or what could this be?
@juanserrano3715
Жыл бұрын
Thank you!
@torontodiy
Жыл бұрын
My pleasure 👍
@sandybetts997
4 ай бұрын
I checked to be sure the hose was not loose on either end. I unplugged it, and waited for a few minutes to see if it would reset. When I plugged it back in, I heard the motor start up. I gave it an hour for the hot water to get hot and see if the hot water would pump, but it didn't, the normal water did pump. Yesterday the water bottle was empty, I bought more water today. The cold hasn't pumped for about a year, I just used the hot water. After unplugging it again and waited a few minutes, I replunged it, and this time I didn't hear the motor. What do you suggest?
@torontodiy
4 ай бұрын
Check the back of your dispenser and turn it on both hot and cold switches. All water dispensers are just have one supply pump just make it sure that all the tubing are properly hooked up and your water cabinet door are securely closed. I hope this helps.
@kenttran5289
29 күн бұрын
I have the Costco Hamilton Beach bottom load and I have the same problem. After opening the top cover, I see the valve ear has been cracked so when I push the dispense button, it open the valve slightly. That is why my hot water starts to slowly decrease over a day or two. A viable fix is to swap the valve that I don't use. I also have an Avalon dispenser where the water on the hot side start to drip. On that one the valve wear down because of the hot water eat way the valve lip. It gets corroded\ pitted that is why it can an seal. I am looking for a more reliable dispenser.
@torontodiy
29 күн бұрын
Primo must be good option
@torontodiy
29 күн бұрын
Check it out all the tubing. Just push it a little. The motor doesn’t pump if there’s one tube is loose. And for the hot and cold, check at the back of your dispenser, turn on both hot and cold switches.
@lalix.trange5127
11 ай бұрын
Hi pal. We are thinking to buy this brand, thanks for sharing. Is it a good option, long lasting?
@torontodiy
11 ай бұрын
Thanks for watching and consider to subscribe to watch my other videos
@BOAmovement
4 ай бұрын
I use the glass bottles and I have the one where the hose is hidden looks like i would have to disassemble a lot of stuff
@yousoufibraham732
11 ай бұрын
Thanks really help-full
@torontodiy
11 ай бұрын
Thank you, pls consider to subscribe 👍
@uglygod-beast8610
3 ай бұрын
Great information. Simple fix! Thank you!
@torontodiy
3 ай бұрын
Glad to hear 😀
@OpDab
9 ай бұрын
2:20
@nathanaelgenaca-tq1wz
5 ай бұрын
Thank you for sharing... ❤️
@torontodiy
5 ай бұрын
My pleasure 👍
@user-xe9mv4pe5j
11 ай бұрын
I just did tht and the light still blinking it’s frustrating and my water is not even cold
@torontodiy
11 ай бұрын
At the back of the unit turn on both cold and hot, and the water supply switch in to two
@quinndiesel3411
10 ай бұрын
I'm having the same issue. We don't use a bottle, we have a filter. After using it, it blinks orange and doesnt get cold. I have to unplug it for a while and back in to get it to reset.
@TheKimichan
13 күн бұрын
I’m having that problem. The cold water light is blinking red and the water is not cold. I tried unplugging it for awhile couple times but no change,
@juancamaney3305
Ай бұрын
Mine doesn't cool the water does anyone have this probpem?
@youknowthething6927
3 ай бұрын
It worked 💪
@torontodiy
3 ай бұрын
Flad to hear that😀
@BIGHIM87
Жыл бұрын
My cold side is not pumping out cold water or as fast anymore? But got side is. What’s my issue?
@torontodiy
Жыл бұрын
Check the back panel there’s a switch for hot and cold line you should turn on both.
@hrdkorebp
10 ай бұрын
Editing would save this video
@torontodiy
10 ай бұрын
My apologies, I don’t really know how to edit videos. Just wanted to share whatever I could. It maybe helpful to someone. Thanks for watching anyway.
@NikoleAbrego-dc7rh
11 ай бұрын
This did not work for me.
@torontodiy
11 ай бұрын
Your water supply should be turned on to bottle if your using the bottle
@danisshaavery100
7 ай бұрын
My hot water side isn’t working please help
@torontodiy
7 ай бұрын
You can check the back panel of your dispenser, there is switches for cold and hot, it might be rhe hot is off
@munchykit6436
3 ай бұрын
True… but honestly modern videos have really spoiled us. I think we don’t have the patience anymore to listen to a real person talking. There’s awkward breaks, we need to inhale.. etc. this is how a normal person speaks and we just don’t listen as good as we used to before technology took over.
@nays8618
3 ай бұрын
My is brand new and I tried that it doesn’t work
@torontodiy
3 ай бұрын
Check the back panel and turn on the switches
@nays8618
3 ай бұрын
@@torontodiy I only see one switch in the back the I/O
Пікірлер: 68