Thank you for this! i am looking for something similar. Is it possible for using this in a well, with the following demensions: 8.20 m deep, wide: 2.55 meters. Water level in the winter is max 7.90 meter, and in the summer, minmum of 1.5 meter. Or is it better to use other solutions?
@TheBarretNL
Жыл бұрын
Water reflects like all radiowaves like a frigging mirror, why didnt i think of this. :P
@snegar1677
Жыл бұрын
My device is showing offline,, how to turn it to online,, or why it is not showing online, after done everything you said
@stevepauljoju2645
Жыл бұрын
yep me too
@venkatvijayakumar6176
Жыл бұрын
how can we avoid turbulance, while water is being filled?
@ashwiniparate1863
6 ай бұрын
sir, this project i have tried and i done it successfully, thank you sir. if i want to use 3 water tank what will be the coding , cause i tried this using more 2 functions but program not working
@ImpulseTech
6 ай бұрын
You can use it with the 3 ultrasonic sensor as well don't create the separate function, just send the readings of the 3 sensor using one function
@aggdub
11 ай бұрын
Thank you so much 🙏 I was trying to do it watch all other videos but was getting error while uploading. Finally your code is the best
@ImpulseTech
11 ай бұрын
Your welcome ❤️ do subscribe to the channel and share with other
@sinanfcb1
Жыл бұрын
arduino ide it shows me this msg below: sketch_jan30a:28:10: fatal error: ESP8266WiFi.h: No such file or directory #include ^~~~~~~~~~~~~~~ compilation terminated. exit status 1 ESP8266WiFi.h: No such file or directory This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.
@MinakshiBiradar-m7s
4 ай бұрын
me also
@MinakshiBiradar-m7s
4 ай бұрын
solution?
@BlueSky-cy5nw
Жыл бұрын
Ultrasonic sensor is not suitable for this type of monitoring. The dampness will kill the sensor within days. Even the waterproof versions of ultrasonic sensor can't give accurate readings because moisture condenses on the sensor body and it gives false readings. A better way to measure the level is through a pressure sensor that is placed at the bottom of the tank.
@ImpulseTech
10 ай бұрын
Thanks a lot for the information
@Bilalelsoussi
Жыл бұрын
So many thanks for your helpful tutorials. I applied this project using A02YYUW on ESP8266. Pins of the sensor as following: 1 to VCC, 2 to GND, 3 Trig to D5, 4 UART/Eco to D6. As a result, it’s getting wrong, fast flashing 2 values 24% and 100% all the time. What I made wrong?
@Uni12355
Жыл бұрын
How far can I lay the cable from ESP32 to the ultrasonic sensor ? 30m ok with STP cat 5e ?
@francozaayman8164
Жыл бұрын
Thank you so much for this great video!! I successfully managed to install my water level meter thank to your video. Do you know how to link this Blynk device to Home Assistant?
@ImpulseTech
Жыл бұрын
Thanks for your kind words. You can make this project on arduino IoT cloud and then you can integrate Alexa to the Arduino IoT cloud
@prathamagnihotri1912
Жыл бұрын
Hello Sir In your code it is showing D5 is not declared so what can I do ?
@snegar1677
Жыл бұрын
My reading is not changing,please help me about this
@ImpulseTech
Жыл бұрын
You need to recheck the connections and internet connectivity
@fathimatuzzahrakhoiriyah
Жыл бұрын
please help, i can barely know about this but can you help me, i did the code but the result in blynk doesn't work says the level in 100 cm but actually it's not. i use ultrasonic HY-SRF05 and ESP32 :)
@eng2321
9 ай бұрын
Hi can you help me pleas , I tried all the steps and they are all correct, but when I try to control the devices via the phone, it appears offline ? what i do 💔
@Dev-fp4oc
2 жыл бұрын
Bro why I'm getting reading 100 all time except my sensons reading
@maryamchaudhry9691
Жыл бұрын
Sir can i get notification alert from blynk app when water level reaches 90%?
@smanivannan002
2 жыл бұрын
Could you post a program adding buzzer in the circuit when water level reach low or hig
@ImpulseTech
2 жыл бұрын
It's very simple just define one pin for example int buzzer = 7; Then use the conditional statement Like if level is low then Digitalwrite (buzzer,HIGH); It's simple just give it tey
@kannanvasanthi3222
Жыл бұрын
Helped us more Sir, Sir can we get report for this project?
@Hollymarcus-x3b
10 ай бұрын
Hi sir i have questions can I have your Instagram?
@ImpulseTech
10 ай бұрын
impulsetechy
@MounifGhrayeb
Жыл бұрын
hi, I am not getting an authorization token, is this feature paid?
@abdulraqeebkhan7900
2 жыл бұрын
sir, blynk is connected to node mcu but the readings of ultrasonic sensors is not showing in the blynk. please resolve my issue. thanks
@ImpulseTech
2 жыл бұрын
Is the device showing online try to check the connection of ultrasonic sensor with esp8266. And also try to see the output on the serial monitor
@abdulraqeebkhan7900
2 жыл бұрын
@@ImpulseTech thank you sir, you have made my day and carrier too. I love you
@ImpulseTech
2 жыл бұрын
Thats nice to hear ❤️
@sivakumarreddymtech
10 ай бұрын
How much will be the cost
@ImpulseTech
10 ай бұрын
Can you send me the mail at impulsetech101@gmail.com
@ANASTASIA-zl3dj
2 жыл бұрын
can i replace esp32 with stm32?
@ImpulseTech
2 жыл бұрын
If it has internet connectivity capabilities then you can do that
@lalithayerukonda8799
2 жыл бұрын
Not getting automation in advanced options
@ImpulseTech
2 жыл бұрын
Now Blynk iot platform has switched the automation tab separately in template itself. Also have created the separate video for it explained the same
@MrAbhishekjoy
2 жыл бұрын
My reading is showing always 100 , can you please guide me
@hysniballa8564
2 жыл бұрын
the same is happing to me did you find a solution?
@Dev-fp4oc
2 жыл бұрын
Did you find any solution bro?
@almightypush2251
Жыл бұрын
You need to add libraries for blynk too which the youtuber missed in the video😁thank me later
@ivaharisya4846
Жыл бұрын
why are mine still can't online please help me
@sinanfcb1
Жыл бұрын
hello dear, can this be integrated with home assistant?
@avishekchatterjee9968
2 жыл бұрын
What power supply you have used to turn on the board? And what port you have used to upload the code in ESP8266? please give me the circuit diagram of this project.
@ImpulseTech
2 жыл бұрын
The port is there in the port section o have selected that and for power supply i have powerd it using the micro usbcable. And circuit diagram is there in the video and code is in the description Thanks
@avishekchatterjee9968
2 жыл бұрын
@@ImpulseTech thank you 😊
@ImpulseTech
2 жыл бұрын
Welcome ❤️
@mohammadqatanani94
2 жыл бұрын
I did everything as you described in the video but the platform show me that the device offline even that it's online on my router app what to do
@prakashnarayan7852
Жыл бұрын
Could you please tell me solution for water getting condensed over the ultrasonic sensor fitted on the inner surface of OHT lid. Sensor gets damaged and stops working
@JOHNSMITH-ug2mt
Жыл бұрын
How would I program arduino/Blynk with just using a 2-wire float switch to show a Red led in blynk?
@abdirahmanqorane2858
2 жыл бұрын
I need this project
@ImpulseTech
2 жыл бұрын
Ok you can email me @impulsetech101@gmail.com
@amirsyakir2273
2 жыл бұрын
maksud mu gano
@ziadayoub2102
2 жыл бұрын
HI, Sir i liked this project, but i didn't know how to get the code. If u can help please ,I really appreciate. Thank you. Ziad.
@ImpulseTech
2 жыл бұрын
I have pasted the code in my blog if you not able to get it please contact me at impulsetech101@gmail.com I can send you the file
@ziadayoub2102
2 жыл бұрын
@@ImpulseTech thank you for your reply
@ImpulseTech
2 жыл бұрын
@@ziadayoub2102 your welcome ❤️
@ziadayoub2102
2 жыл бұрын
@@ImpulseTech i sent u an email ,when you have time share with me the code , Thank you.
@ImpulseTech
2 жыл бұрын
@@ziadayoub2102 ok i will do it in the evening
@sankettalebailkar6963
2 жыл бұрын
code for esp 32??????????????
@ImpulseTech
2 жыл бұрын
ok sir i will try to make one for you actually i made this for esp8266
@sankettalebailkar6963
2 жыл бұрын
@@ImpulseTech when u will give ??
@ImpulseTech
2 жыл бұрын
@@sankettalebailkar6963 can you just mail me here impulsetech101@gmail.com so that I remember it
@yashkhandelwal8737
Жыл бұрын
I Need the esp32 code
@kannanvasanthi3222
Жыл бұрын
How to enable port option?
@ImpulseTech
Жыл бұрын
Which port you are talking about ?
@kannanvasanthi3222
Жыл бұрын
@@ImpulseTech port option in arduino 1.8.18 sir
@ImpulseTech
Жыл бұрын
@@kannanvasanthi3222 i can see there is option of port. Make sure that you are using the right USB cable then only your device will appear
@kannanvasanthi3222
Жыл бұрын
@@ImpulseTech sure sir
@Tamilselvan-fd3jg
6 ай бұрын
Excellent 👍👍👍
@ImpulseTech
6 ай бұрын
Thanks 🙏🏻
@naranisrimani7343
2 жыл бұрын
you are god , you are god i say , Congratulations.. i love u sir........
@ImpulseTech
2 жыл бұрын
Thanks ❤️ your words motivate me to do more
@naranisrimani7343
2 жыл бұрын
@@ImpulseTech sir can you please tell how to deploy the buzzer into it , we are not getting it . Please help..
@ImpulseTech
2 жыл бұрын
@@naranisrimani7343 just define one pin like int buzzer= D5 Then use conditional statement lke if soil moisture sensor value increases certain value then digitalwrite buzzer HIGH
@malwatismail786786786
Жыл бұрын
can i apply number of tank monitoring like railway coach water tank....? second thing control remotely....?
@ImpulseTech
10 ай бұрын
Yes you can do that
@malikarslan6955
Жыл бұрын
I am getting an error message how can I fix it.? Traceback (most recent call last): File "C:\Users\Hamza Khalid\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.0.2/tools/upload.py", line 66, in esptool.main(cmdline) File "C:/Users/Hamza Khalid/AppData/Local/Arduino15/packages/esp8266/hardware/esp8266/3.0.2/tools/esptool\esptool.py", line 3575, in main esp = esp.run_stub() File "C:/Users/Hamza Khalid/AppData/Local/Arduino15/packages/esp8266/hardware/esp8266/3.0.2/tools/esptool\esptool.py", line 728, in run_stub raise FatalError("Failed to start stub. Unexpected response: %s" % p) esptool.FatalError: Failed to start stub. Unexpected response: b'HAI' Failed uploading: uploading error: exit status 1
@ImpulseTech
Жыл бұрын
Have you installed the board and selected the correct com port
@maryamchaudhry9691
Жыл бұрын
@@ImpulseTech Thanks for Responce.. My program is upload succesfully.. Now I want 100% when the water is 28cm away from the sensor.. So, where should I change in the programming.?
@maryamchaudhry9691
Жыл бұрын
Total hight is 140 cm
@saeedmashwani14319
Жыл бұрын
@@maryamchaudhry9691 help me why my device is not showing online?
@saeedmashwani14319
Жыл бұрын
@@ImpulseTech sir my device showing offline what the reason behind this?
Пікірлер: 100