Thanks alot for the video. very insightful. I have a related questions; how do I resolve issues of limescale? (I see some white dry film residue almost like fine sand on utensils after they get dry) I have a number of pre and post micro filters installed as well.
@demlom
6 ай бұрын
First, you need to find out what's causing the limescale. This could be calcium or magnesium, and the high level of these two could mean that your water is hard. If its any of them, you can use a descaler, antiscaling system, or a water softening system. Scales could also be a sign of hard water, so a simple water softener would solve your problem. Also if the TDS is already high (something above 500 is high) and you add water softener, the TDS would shoot higher but the water would stop producing scales but it would mean that you would need to deal with taste. So I would suggest you test the water first. After testing, then you can determine if you have in excess scale causing minerals or your water is salty, and you will know how to deal with it.
@thomasankomah4328
5 ай бұрын
Great lecture….My bore hole water came back satisfactory for drinking but I don’t like the taste and have noticed a slight browning/rusting of my metallic plumbing materials pH 6.52. TDS 386 and Iron less than 0.010 …what can be done to improve the taste
@demlom
5 ай бұрын
Your water pH is just on the border line. I will suggest you get a calcite filter or a soda Ash dosing system to improve the pH slightly to around 6.8 to 7. With the brownish stains, I suspect iron, but since you said the result came out with 0.010, then you should take a look at your manganese level. TDS 386 is okay, not too pure, and not over mineralised.
@thomasankomah4328
5 ай бұрын
@@demlomthank you the Manganese is 0.278 Where can I get the calcite
@demlom
5 ай бұрын
@@thomasankomah4328 kindly check www.universalaquaghana.com to get a calcite filter.
@thomasankomah4328
5 ай бұрын
@@demlomthank you see the attached water test and advise which installation will address my issues of bad taste and the minor browning of my lines… What system installation will sort all my issues pH 6.52 and minor rusting of metallic lines out considering cost as well?
@andyasamoah6149
5 ай бұрын
Great info. Would it be possible to have a consultation session with you?
@demlom
5 ай бұрын
Yes you can reach me via email. Demlom@yahoo.com
@andyasamoah6149
5 ай бұрын
Good evening. Thanks for providing your email. I reach out through your email pending your response. Thank you so much
Пікірлер: 22