6:20 you forgot the flip the Font so not the bottom is backwards??
@ALEXANDERCRETA1
Жыл бұрын
Costumer wants the letters backwards
@johnherring8114
2 жыл бұрын
should have flipped the image before printing the year is backward.
@ALEXANDERCRETA1
2 жыл бұрын
I know customer want this way if you want to see normal and generally if the decal have letters numbers etc you must make mirror printing before...thanks!
@nardaoeletronica
2 жыл бұрын
Excellent work
@MrBrassporkchop
3 жыл бұрын
I'm restoring a tank and will be needing to do this for the decals and I'm terrified I'm going to mess something up. Trying to absorb everything I can to try to burn the process into my memory before I get to this step. It's wild watching you just leisurely just going about doing everything because I know I'll be going extra extra slow when I do it.
@ALEXANDERCRETA1
3 жыл бұрын
Don't worry its not big deal this tank its my fourth i do with this method... Its easy if you do something wrong you can always fix it... First steps its to paint after you paint leave it dry and after dry there is no way to do wrong you can do only wrong with the decal but thats easy you can always take off and apply some new no harm done... Try to practice 2-3 times its not very difficult...apply clear coat at the end be careful at the decal edges to stick well before clear coat and don't have gaps..
@fabianacaruso5245
2 жыл бұрын
Ciao potresti indicarmi un negozio online dove comprare queste decals?
@jackcalvar6489
2 жыл бұрын
It will help to use decal softening solution to snug the decals.
@rubenalejandrofrias6968
2 жыл бұрын
Hola una pregunta que le pasas antes de meterla en el agua es una pintura especial para que se afloje el papel??
@ALEXANDERCRETA1
2 жыл бұрын
O.k thanks no the procedure is the same we paint normally primer paint sticker and varnish on top.. This is not special paper its a copy paper that goes in laser printer ant it have a transparent film that when you put it in the water it takes off and you put it in the item you want..
@strannikiRU
Жыл бұрын
Привет👻 Что за наклейки? Обычные, как в рекламе используются? Ступеньку удалось лаком убрать? Наклейка относительно толстая же.
@richardreyes8730
3 жыл бұрын
So what did you spray it with at first?
@ALEXANDERCRETA1
3 жыл бұрын
First Primer after Paint apply water print image and last clear coat..
@richardedwards3851
Жыл бұрын
I dont get how spraying the top side of decal paper then sticking it on the paint works, the sticky side is between the decal and backing, what he sprayed white was the top
@dimebag108
3 ай бұрын
How did you get rid of the tiny steps from the decal edges underneath the clear coat?
@ALEXANDERCRETA1
3 ай бұрын
2 hands of clear coat 1200 grip paper wet sanding and 2 hands clear again
@dimebag108
3 ай бұрын
@@ALEXANDERCRETA1 i did that but in the lateral light I still can see the edge shade of the decal underneath the clear coat :(
@ALEXANDERCRETA1
3 ай бұрын
@@dimebag108 you must spray the edge of decal with the same color the background is, for example in this tank that is black you must spray ,the edge with black colour so with this trick you erase the edges...
@dimebag108
3 ай бұрын
@@ALEXANDERCRETA1 great job. Do you think an anti UV layer should be sprayed before the final clear coat to preserve from the sun?
@ALEXANDERCRETA1
3 ай бұрын
@@dimebag108 its a good idea
@samgvt1593
2 жыл бұрын
Why do you paint one face in white on the print image?
@ALEXANDERCRETA1
2 жыл бұрын
Couse if you put black background decal on black tank it will not appear the image one of two must be different colour.
@samgvt1593
2 жыл бұрын
@@ALEXANDERCRETA1 I see, thanks!
@monicaleon3979
2 жыл бұрын
Did you use sticker paper?
@ALEXANDERCRETA1
2 жыл бұрын
Waterslide decal paper
@XXX-qk2cq
3 жыл бұрын
No comments? Well the job looks cool but the painter left out a few steps. He changed the decal up trimmed the top and sides and didn't show us how he hid the edge of the paper. Looks cool anyway
@ALEXANDERCRETA1
3 жыл бұрын
About the decal i saw that it was a little bit big about this tank an i cut the letters on the top with a razor blade and draw some flames... About the edge if have some spots that is not glue with tank gust push it a little bit with your fingers before clear coat Thanks!
@XXX-qk2cq
3 жыл бұрын
@@ALEXANDERCRETA1 Cool, good job, I have never done it.....
@ALEXANDERCRETA1
3 жыл бұрын
@@XXX-qk2cq Thanks!
@bmdv01
3 жыл бұрын
Looks cool but the transfer flipped the 2013.
@tadgh123xx
Жыл бұрын
You didn't wet the tank itself b4 applying decal ...big no no
@zoltan5823
Жыл бұрын
Hi, how did you run the image?
@ALEXANDERCRETA1
Жыл бұрын
Hello it's a technic called waterprint slide decal.. It's a special photographyc paper and the image you can print at any laser printer...
Пікірлер: 37