I just placed my order. It said there were 2 black ones available. Now there should be only one. If you want the last one for Christmas don’t wait. 😉 I plan on entering mine in some indoor competitions this winter so this is required equipment. Thank you for making these available.
@qrisemrc
Жыл бұрын
It will be easy to install inside the rc car using the winch mount. It's a cool device.👍👍👍
@thatoneguyyouthought
Жыл бұрын
Not at all what I set out looking for but is now absolutely being added to my part list. I was looking at 3Dprinted ones but this is so much nicer.
@CAPRAQUEENRC
8 ай бұрын
I have that in my RYFT with the prototype 1Tenth RC front wing mount and RC4WD 1/8 winch. I also have a RYFT with a RC4WD 8274 front winch
@donniehunter309
Жыл бұрын
Damn cool to see a suck down winch in an RC. Another great product Logan. Thanks!
@westdesertwheeler
Жыл бұрын
Thank you!
@genenelson5781
Жыл бұрын
I got mine Saturday, installed Sunday. Easy install, great fit. Great product. Thank you Logan.
@s1096cm2
Жыл бұрын
DUDE!!! i was actually trying to figure out how to install a servo as a winch in my car this last week. Today this is in my recommend videos... first time I was happy my phone was listening in!. This is fantastic! got a Black one on its way. You Da Man.. Man Thank You
@westdesertwheeler
Жыл бұрын
Already packaged up, thank you for the support!
@s1096cm2
Жыл бұрын
@@westdesertwheeler Already got it, installed it, and loving it. Thanks so much for making this happen it's fantastic!
@riochavez665
Жыл бұрын
5:00 doggie flew away
@timothystruven8629
Жыл бұрын
Definitely gunna order one of these once I get up to Utah next few days
@beauvrt
2 ай бұрын
That's awesome!
@Dr.Thermite
Жыл бұрын
Thank you.
@robgoffroad
Жыл бұрын
I must have this! :) Great job!
@westdesertwheeler
Жыл бұрын
Thank you Rob!
@brettwallick4885
Жыл бұрын
I need to get the mount for the axle for my Capra based c3 for a suck down winch
@zip2692
Жыл бұрын
Got mine installed today & programed to my remote. Awesome. Thanks W.D.W.
@chokecherry_rc
Жыл бұрын
thanks bro i just ordered one, i’m coming to sand hollow in september and i can’t wait
@westdesertwheeler
Жыл бұрын
Thanks so much for the support
@gibsonlife573
Жыл бұрын
Great job proud of you
@Love2Wander
Жыл бұрын
Cool product and the price is good.
@westdesertwheeler
Жыл бұрын
Thank you
@mikeearls8158
Жыл бұрын
This is amazing!! I’ll be ordering!
@westdesertwheeler
Жыл бұрын
Thank you!
@shaynejenkins446
Жыл бұрын
That's freakin rad dude.
@westdesertwheeler
Жыл бұрын
Thanks, yours is packaged up 👍
@shaynejenkins446
Жыл бұрын
@@westdesertwheeler Just installed it. Went in super easy. Using it as a suck down winch is gonna make some lines more interesting. Such a great idea. Now I have 2 WDW Capras lol.
@TodWulff
5 ай бұрын
Just ordered mine. Pretty geeked to get it in hand and installed. I have a question on implementation. On the top of the servo bracket, what about putting a really small pulley and then have the fair lead ran through the pulley and out the grill with a hook large enough to prevent it getting sucked into the hole. that way the winch should be usable both as recovery and also for body suckdown. Seem reasonable?
@aaronhouser3711
Жыл бұрын
Slick
@chrisgaumer9551
14 күн бұрын
Logan are you still making the micro service winch mount?
@Pinpinz2005
Жыл бұрын
When will you ship to Canada???
@knusperpiti1015
5 ай бұрын
Hey Logan, i would like to order one to Europe but cannot select a shipping method.
@braydenfrench8569
9 ай бұрын
So what about the cms kit from you? I think i might be able to come up with something to work…. Lmk what your thoughts are.
@BENJAMIN_BANS1776
Жыл бұрын
Do you know of any axels that aren’t crazy expensive? Cause I need some for my Trx4 because I’m making it into a crawler and I need wider axels but I can’t find any that aren’t expensive.
@jessemiles5856
Жыл бұрын
Will this work with the Chupacapra setup? Or just stock cage?
@silverbulletJKU
11 ай бұрын
Will the suck down winch piece be released?
@gillyboyNY
11 ай бұрын
Hi wdw, I’m about to order the Capra Micro Winch Mount kit with the reefs servo. The website doesn’t itemize the kit. I just want to make sure it comes with the stainless steel suckdown bracket. Also, does the tow hook 🪝 come with it?
@westdesertwheeler
11 ай бұрын
Yes it comes with the stainless servo bracket and winch hook 👍
@mosslager
Жыл бұрын
Will that also work with a RC4WD winch as the mount...I know it would be tucked away but then you could use the RC4WD remote setup with a stock radio
@westdesertwheeler
Жыл бұрын
This will fit micro servos
@user-pq3vd6nh6g
5 ай бұрын
Where can we oder one
@mve1970
Жыл бұрын
Please start shipping to Europe 😊
@TheAmericanUhate
Жыл бұрын
I only use nsdrc servos and the micro's just have a single center hole on each side instead of 2 on each side. Is there enough room on that add a 3rd hole in the center of the other 2 holes? Just to make it more universal
@westdesertwheeler
Жыл бұрын
The reefs mount in the center same as NSD. It will fit and work.
@rcrobertcurrie
Жыл бұрын
No Canadian Shipping?
@davidbanaszak562
Жыл бұрын
I want one
@JJClark-lh7qo
4 ай бұрын
We're did you get the winch?
@misguided5421
Жыл бұрын
Hey Logan, what thumb steer do you use on your Flysky GT5?
@westdesertwheeler
Жыл бұрын
A friend printed one for me not sure where it’s from
@arunc1958
Жыл бұрын
Do you sell the servo bracket ?
@shaunwee7658
6 ай бұрын
International shipping?
@reddirtrccrawlers
Жыл бұрын
Just curious if there is any issue with the winch line sawing through the plastic of the cage with repeated use? If so adding metal shielding that bolts over the plastic would be a great additional part for longevity
@westdesertwheeler
Жыл бұрын
No evidence yet. Sure it could be possible but it would take a ton of use to even leave a mark
@TrailinAndScalin
Жыл бұрын
Will this work with the chassis mount servo kit you sell or will the two interfere with each other?
@westdesertwheeler
Жыл бұрын
They interfere
@richardbeckett4583
Жыл бұрын
Just ordered the kit. Wrong address is attached though 😢 i hope they email with a confirmation so i can email them. Dammit hate when that happens
@westdesertwheeler
Жыл бұрын
I can get it fixed. Email me westdesertwheeler @ gmail .com
@richardbeckett4583
Жыл бұрын
Sent. Thank you
@chainsaw7887
Жыл бұрын
So you're saying I need another Capra to install this in🤔
@westdesertwheeler
Жыл бұрын
I had to lol
@gillyboyNY
Жыл бұрын
I use a zen 4200 mah battery that takes up the battery tray. Do you think it will clear it?
@josephdesilva9400
3 ай бұрын
Mine went in but with some patience lol the fire wall is adjustable so I moved it back for more clearance
@beekerbeeker5779
Жыл бұрын
2 questions. Does a 3600 gens ace adventure series still slide into place without removing the spool? And do you ship to Canada??
@westdesertwheeler
Жыл бұрын
Unfortunately I don’t have a 3600 so I’m not sure. It will be tight with that big of a pack
@shaynejenkins446
Жыл бұрын
where is the servo bracket? I'm ready to order
@shaynejenkins446
Жыл бұрын
Nevermind I missed the part about it being a prototype. You just sold a red micro winch mount though.
@westdesertwheeler
Жыл бұрын
The servo bracket is included. The video was shot with the prototype you will get one 👍
@shaynejenkins446
Жыл бұрын
@@westdesertwheeler omg bro you the best.
@EdgeBauer
6 ай бұрын
$110?!!! My guy…. No.
@westdesertwheeler
6 ай бұрын
110$ includes the winch and bracket. The servo mount itself is 40$
Пікірлер: 74