I actually work at the factory in NC where these are made. We make about 200 machines a day. But we haven’t made any Land Management models for the past 3 or 4 months. I’m not sure why but I guess that would explain the shortage. P.s the land management models are a pain the arse to assemble 😂
@Null4eva
Жыл бұрын
Two hundred A DAY?!? My nearest cat dealer is claiming that he can only rent because there's not enough 🤬
@tommyparker1651
3 жыл бұрын
Add the rear counterweights, it'll help with that 3500lb. Cimaf mulcher head. The saddle tanks on the land management hold enough fuel to mulch 12 hours without refueling. They really aren't that bad in the woods. Thought I would hate them, but after the first week you don't realize they're on it anymore, and no they aren't beat up, I don't even have any scrapes or marks on them. The LM also uses the Stucci screw type hydraulic quick connectors, they are really good for reducing restriction and in turn heat build up.
@BamaGuppies
3 жыл бұрын
Very nice machine.. I just bought a new 279d3 (not for mulching) about a month ago. It was on order for 2 months. I have been kinda nervous about my machine since I got it. It came with a cut track, but the dealer made it right. I noticed it squeaking right away. It took 25 pumps of grease before I saw the first drop come out of the upper pins. Coolant was low. Then I happened to stand directly behind it and site down the side and noticed the track lean outward. I have the block style tracks. I only have 22 hours on it now, but the tracks are wearing way more on the outside than the inside. A rep from the company came out and looked at it and said he had never seen anything like it. They were about to start shimming the undercarriage to level it, but I said "hold on" , let's see what CAT engineering has to say. So I got a call last week and they tell me the tracks are supposed to be leaning 1.5 degrees with a tolerance of plus or minus 1 degree. Mine are a little over 2 degrees sitting on the floor and over 3 degrees when machine is jacked up and undercarriage is suspended. I sure think this is a design flaw.. Hard for me to believe they built this machine to wear the tracks uneven. I looked at a few more on a lot Saturday and they seem to lean also, but not as much as mine. Yall please take a look at yours and see what you think..Thanks. Scott Hanners
@NakedDave100
2 жыл бұрын
Did Caterpillar make it right???
@BamaGuppies
2 жыл бұрын
@@NakedDave100 They did give me a new track because of the one being cut. as far as the leaning track, they kept saying they were designed that way. i have looked at several since then and most look the same way. It threw a code a few weeks ago and died. it would crank and run for about 15ft and die again. Code said "low voltage on pressure pump" ended up being a bad crimped wire from the factory. i took it in and they fixed it same day.
@mikewhipkey6863
3 жыл бұрын
My company at one time had 66 Caterpillar 299 CTL's ranging from 2010 to 2015 model years.. I always liked them better than the New Hollands
@pete2814
3 жыл бұрын
Nice machine...you need to chock the trailer wheels when driving a load up on it...that lurching (forward and backward) could possibly damage the truck's transmission (park gear) if enough force is leveled...
@matthewvukelich9504
Жыл бұрын
Well, the first thing I would do a fart noise 😂 love the channel the great work
@tylernatalini2191
8 күн бұрын
Awesome looking skid steer. How long is that trailer btw? Just curious cause it looks like a great setup
@jayrayner3727
3 жыл бұрын
Nice machine you need a 522 feller buncher with a 24 inch quadco 360 hot saw
@justjacked8189
6 ай бұрын
Beautiful Truck. Cant go wrong with Ford.
@joshmann3399
3 жыл бұрын
I’m sure your Blanchard rep will have some questions for you...
@teampenn2007
3 жыл бұрын
Great purchase!!!
@Texans_fan-b8v
4 ай бұрын
If you already have a cat piece of equipment you can just use the key from it for another
@regconrad7783
7 ай бұрын
There junk come on cat the 299c were bullet proof other than rubbing hoses through the frame caught that first beer inspection
@StinkyTeal
2 жыл бұрын
The placement of those final drive hoses kill me...hope you enjoy machine.
@thinkbaker
3 жыл бұрын
They didn’t care that you were out of their “district?”
@bhermon265
3 жыл бұрын
299 looks nice
@BCRailman96
Ай бұрын
So are they worth the 180k plus tax new? That is like a 230k machine. I don’t think I could justify that even when business is at its peak season
@loganmcdonald6821
3 жыл бұрын
You didn’t happen to be at the Ocala ring power were you?
@genecoppedge5972
Жыл бұрын
Lucky you bought two years ago cause the prices have really gone up.
@chriss7930
2 жыл бұрын
Waiting for my new 299d3xe and 289d3 been about 10 months !! Have a landing date of 3rd November landing in the uk
@diesellover6411
3 жыл бұрын
What’s that set up run with forks and bucket and snow blower
@alanabney8504
3 жыл бұрын
Alan here with A&M Grading I have a caterpillar 259d and a 279c and I love them that's all I have in my fleet is cat.
@winscolandclearing
3 жыл бұрын
The best parts and service located everywhere
@robbinstruckinglandclearin786
3 жыл бұрын
Love Ringpower
@mckenziecontracting7382
2 жыл бұрын
Awesome machine. We have one with a Fecon Blackhawk. Bad ass unit. After a few months you still liking it?
@TheHoundsman
3 жыл бұрын
What's the lenth of that trailer
@dennisdison8210
3 жыл бұрын
Did you get ride of the the ASV and other cat
@CWL86
2 жыл бұрын
Just bought one a week ago, running a fecon 74 😎
@Lyve613official
11 ай бұрын
how much they cost brand new
@joedoakes8307
Жыл бұрын
What does a new 299 cost ?
@diesellover6411
3 жыл бұрын
Ok I want a new cat skid preferably a 289 or bigger is ok but I can’t find any do they still have them ?
@ciscokid81
2 жыл бұрын
I just bought one!
@filipinophreak
3 жыл бұрын
Just subbed
@patdevai8916
3 жыл бұрын
What's the price range for this cat 299D3?
@NakedDave100
2 жыл бұрын
I'd say you already know the answer to this, and trying to justify the cheapskate junk you already bought!!!
@theknowgo5186
2 жыл бұрын
A lot. The sticker on the arm that says 299D3 alone costs $20
@Quarterpounderspatch
2 жыл бұрын
150k just got quoted
@patdevai8916
2 жыл бұрын
@@Quarterpounderspatch Thank you.
@MoffittLivestockCompany
2 жыл бұрын
How do you like a year almost a year later?
@winscolandclearing
2 жыл бұрын
Very weak and not impressed @780 ish hours. Running the mulch head and it overheats with in 15 minutes
@tangydiesel1886
Жыл бұрын
@@winscolandclearing what style pump is on the mulcher?
Пікірлер: 44