need quality used and rebuilt parts for your heavy equipment? give us a call 541-447-2488
@chuckh.2227
Жыл бұрын
I had tears in my eyes when you shut it off for the last time 18 years of hard work and faithful service
@roballan4944
Жыл бұрын
I just finished my last full overhaul. Feb1-june29 full rebuild on a d8t fmc1102. Front to back top to bottom. Rebuilt engine, torque, all the pumps, motors, trans, complete undercarriage including bogey pins, pivot shaft, and hardbar. All cylinders rebuilt and already back to work.
@andyramone8497
2 ай бұрын
Before I lost my dad, this was his passion of a job. And that passion sure has influenced me.
@Bigdaddyslasher
Жыл бұрын
19 yrs of service is impressive since they live a hard life.
@phylliswhite4154
Жыл бұрын
50+ years of service would be more impressive.
@user-pw3bq2ui4j
Жыл бұрын
Great video , as an owner of a recycling company I love to to see companies that give machinery extra life by various levels of refurbishment. I love to repair rather than replace even though big business makes that very difficult with so many parts being replacement only with no service kits anymore . Repair, reuse and recycle 👍
@scottbruner9266
Жыл бұрын
Listening to all that hydraulic fluid drain, now I have to pee 😂
@5Loveland
Жыл бұрын
Enjoy your energy and enthusiasm while sharing your work
@00nutt
Жыл бұрын
Man it's one thing doing a good job for your customer but the main thing is how you can tell your guys thoroughly enjoy working for you and with you!!!
@nightsailor1
4 ай бұрын
We used the Ingersoll Rand 3/4" hose unit to air off the dirt on our construction eqiupment; in and out. works great.
@warrenjones744
Жыл бұрын
So boys looks like fun!, everything has an end, don't be sad when you shut it down, it's done its work. A tip on stuck hydraulic fittings you might not know.(I see you undoing that fuel line with a cheater pipe) take an appropriately sized BFH and/or a long punch if need be and wack the flat face of the fittings a few times and they typically come loose without the cheater pipe. It usually works great for those lines up under someplace you cannot just quite reach and apply power or those stuck excavator boom lines at the end of the tubes. Both JIC and ORS. If it's rusty or cross threaded or whatever by the previous guy...you're on your own! Cheers
@dannycrooks8462
Жыл бұрын
Prayers for the D10 she had a hard working life 🙏
@donraptor6156
Жыл бұрын
You are praying for a hunk of sheet metal?
@masaharumorimoto4761
Жыл бұрын
Neat! Thanks for taking the time to film, edit and share with us, I'm physically disabled and can't do what you do, so I really appreciate the effort to let us into your world :)
@angushoover8670
Жыл бұрын
It's amazing that the size and weight of a D10, just how narrow the tracks are. You would think that it would sink to the belly in soft dirt.
@markm1964
7 ай бұрын
narrow track pads hard rock longer rail and undercarriage life flotation not needed pushing shot bed rock
@KB-gs8zi
Жыл бұрын
Hey Quinton !!! Nice job of getting the fuel tank off with NO injuries !!! 🙃🙂😊 Hope it works well for your Customer !!! 🤔🙄🤠😎👀👀👍👍👍👍👍
@heavymachinery2843
Жыл бұрын
Love to see some caterpillar wrenchin 🤘👍
@larryperdue508
Жыл бұрын
Looks like it could use a good sand blasting 😊
@Cristian-jc5og
10 ай бұрын
The new killdozer is looking good 😂
@Bigdaddyslasher
Жыл бұрын
I really like this kind of video it's very informative
@heartsky
Жыл бұрын
Quinton get one of those new Insta 360 Go 3 cams, you can wear in on your chest or hat, and there's magnetic attachment modules for attaching to stuff -- free up that other hand of yours. Casey sent me. Sub'd.
@BC-ue3ku
Жыл бұрын
Looking good Q👍
@stevenrobertson9583
Жыл бұрын
Good to see the Boss came up knowing how to do the actual work rather than one that. Is my daddy owned the company and now I do, so you do the work and I just collect the money! Because the fathers that don’t make their children learn everything from the ground up. Are setting them up for failure!!!
@garychaiken808
Жыл бұрын
Good job 😊
@robertquast9684
Жыл бұрын
It’s always sad to watch you tear these old girls apart but many more will be saved
@wildbenny11
Жыл бұрын
Yea I want to more like that nice video
@wbball15
Жыл бұрын
Great share.
@stevenrobertson9583
Жыл бұрын
The tracks have been road hard and put up wet, lol 😹😹😹😹😹
@jeffclark2725
Жыл бұрын
Cool video,Thumbs up
@Teezeboy
Жыл бұрын
Most customers would have brought that machine in for a CAT certified rebuild.
@knoester7714
Жыл бұрын
Good job guys
@andrewjennings5002
Жыл бұрын
These videos are awsome. Get a magnetic camera mount and a tripod and these would be incredible.
@floydwilliams3321
Жыл бұрын
That’s pretty cool man
@user-dl9cl7pb1b
11 ай бұрын
😉👍
@orenhicks1051
Жыл бұрын
Good Job
@Av-vd3wk
Жыл бұрын
I want to see a SUPERBIRD series!
@rosshall641
Жыл бұрын
Cannibalizing old equipment is worse to fix working equipment but this was cool to watch😊
@richardgatchell2523
Жыл бұрын
May I ask what is actually wrong with the D10 to be putting her in to parts? She's running but I'm not familiar with dozers so I wouldn't know a thing. From Richard Gatchell from all the way in NEW ZEALAND
@ClaytonHartin
Жыл бұрын
Flexzilla 3/8 stubby impact working hard lol
@harleypub
Жыл бұрын
How do you price your parts that you pull? is a percentage of a new part? or is there like a chart for used parts in whatever condition they are in at the time?
@stevenrobertson9583
Жыл бұрын
Not to be critical, but you should have a collection of hydraulic hose fittings and caps to cap off your hoses so you don’t loose and leak fluids.
@richardellis3141
Жыл бұрын
cool stuff
@marvinspencer3823
Жыл бұрын
Nice need one of thoes and some ar 500 steel plates
@wrecklesspleasure3298
Жыл бұрын
i saw you with casey i learned about casey from matts off recovey ialready like what i see
@Doitgood52
Жыл бұрын
Try putting a vacuum on the fuel inlet when taking off small lines 😊
@jondoherty3884
Жыл бұрын
It's called Those who stand and wait also serve
@nonyadamnbiznezz9704
Жыл бұрын
Get a head mount for the camera or a tripod
@yardfowl3149
Жыл бұрын
Why am I emotionally attached to old steel?
@hayabusah1009
Жыл бұрын
sand blast or laser clean may be quicker ?
@Maker_of_Things
Жыл бұрын
Just curious. What took that Cat out of service as 'end of working life'? Is it just uneconomical to overhaul as a working machine, or was there something more 'Cat'astrophic that happened to it to make it uneconomical to repair? Thank you.
@quintonbartolotta
Жыл бұрын
Due to the amount of frame hours “65,000” it was just un economical for my customer to keep fixing and repairing it.
All that does is make a giant sticky sticker mess haha
@grahamhale8844
Жыл бұрын
Done it for years no mess just peals off
@rosshall641
Жыл бұрын
Is the old tank repairable that's on that tractor this one's going on
@garrettrice7598
Жыл бұрын
Will you take the old tank back and repair it?
@art1muz13
Жыл бұрын
SO HOW MUCH DID THAT PART SELL FOR?
@stevedibiase728
Жыл бұрын
Can we say shes a organ donor so that others can maybe live on...
@aaronjarvenpa1743
Жыл бұрын
Why part it out when you just put some money into it and sell it as a running machine .
@johnrigg9907
3 ай бұрын
I know this video is 9 months old, but what is the logic in tearing down the machines for parts? If it is a working machine why can't it go back to the field?
@waynep343
Жыл бұрын
Do you get the used tank back to refurbish
@quintonbartolotta
Жыл бұрын
Im going to try, hopefully it is saveable!
@waynep343
Жыл бұрын
@@quintonbartolotta if not repairable build a jig. Measure the tank components. Transfer those out. Digitize them for water jet cutting. Build your own tanks. If you build them they will sell.
@wallbawden5511
Жыл бұрын
okay firs time watching your Chanel this one on the Dozer Down and not to impressed with some of your calls on the fuel tank customer say has one down with a hole or what ever in it's fuel tank as there not allowed to repair there fuel tank you you have one but upon taking it off you fined it has had a repair carried out you say its good and your sending it to your customer now either they had a board meting and changed the rules around fuel tanks or there was none or your sending it with the hope they don't see it or you were banging your gums for some thing to say and do so there in lies the thumbs down but you more than likely like all other ones i watch can't be bothered to read comments as there is to meany or to long like this one so Cheers and i may watch some more if i can get round the tall stories bit
@baggerbegger
Жыл бұрын
You should learn how to write correctly if you want someone to actually read and understand it.
@wallbawden5511
Жыл бұрын
@@baggerbegger Sorry for that but some of us never had the time . I spent most of y teen years looking after my mum , and trying to hold down a night job . so, I could feed us and such so please don’t judge , till you walk in some one else’s shews .
@Jack-1212
Жыл бұрын
And now its dead in the shop, good thinking
@patrickswagger
Жыл бұрын
Brother, you don't have to explain every little thing , some people have imaginations. just saying
@chuckh.2227
Жыл бұрын
That machine will make a nice organ donor
@kencrouch668
Жыл бұрын
I came here from Casey Ladelle's channel- a couple of comments and please do not think I'm a back seat quarterback as I am just making observations: I hate to see such a Big Giant of a machine scrapped - but as you said - it will live on in other machines. The strap in 8:47 where you were lifting the part up- it looked frayed- my question is how often if ever do you replace these? The reason I'm asking is where I worked at we had a safety person and she went around and had to inspect theses straps - we were supposed to look at the strap every month our selves and attach a different color cable ties each month. If the strap was frayed then we would have to toss the old strap in the garbage and purchase a new one - they would not give us the old one to take home. Also- I see that you are using a grinder to strip off the old paint. I don't know how much you painting you have to do but have you considered using dry ice? Dry ice is very effective in removing paint and other materials - it will not harm the environment as it melts when it drops on the floor.
@59patrickw
Жыл бұрын
you should check the strap every time you use it , if you do not know what to look do not use a strap , I had the same job as the person checking the lifting gear every week and before use as all slingers have been shown and taught how and what to look at and care for the lifting equipment
@quintonbartolotta
Жыл бұрын
If the strap was to be used for a suspended load i would have grabbed a good rated strap, since it was simply being used to pull something out of the way nobody was in danger. As for dry ice that sounds like a great idea but is much to costly for the amount of parts i sell on a daily basis.
@brucestevens1892
Жыл бұрын
too much TALK
@jimg7784
Жыл бұрын
All talk almost no action, moving on.
@quintonbartolotta
Жыл бұрын
Bye
@einfelder8262
Жыл бұрын
Bloody hell - you said you're going to go ahead 50 times but only went ahead 10 times. Too much crap talk mate, you say everything 10 times. Once is enough. And for good measure, the saying "going to go ahead" is a tautology of the worst kind present only in the American bastardisation of the English language.
@quintonbartolotta
Жыл бұрын
Thanks for counting for me
@einfelder8262
Жыл бұрын
@@quintonbartolotta I didn't - it was a low estimate....
@sawman278
Жыл бұрын
Don't watch if you don't like what he says. Try to do something productive instead of running someone else down.
@einfelder8262
Жыл бұрын
@@sawman278 STFU and mind your own business.
@vitobartolotta7446
Жыл бұрын
I dare you to pull the fast fill line full of fuel! Ha
@quintonbartolotta
Жыл бұрын
it has a 1 way check valve so fuel cant come back out
@daviddunsby3617
Жыл бұрын
Why didn't you just use a wiggins fast fill gun & hose to drain the fuel?
Пікірлер: 92