I, for one, love it that you share it with us when something doesn't go according to plan. Chin up.
@nates2526
3 жыл бұрын
Thank you for sharing your failure. I really enjoyed this whole design process and am sorry all your efforts did not reach your goal. I’m looking forward to the next project you share with us!
@mtcarmelman632
3 жыл бұрын
Rob, No doubt, you WILL make this a success, THANKS as always for sharing!
@RobsAquaponics
3 жыл бұрын
At least you had a crack Rob. 👍 Looking forward to seeing the next project mate. Cheers.
@rolliebca
3 жыл бұрын
Awesome video! Thanks for sharing the adventure and the results. Although this iteration had problems, I think your creativity and resourcefulness will get you a win eventually. Best wishes!
@SarahHafley
3 жыл бұрын
I'm impressed that you didn't require a ton of bleeping over the audio right after the failure. :)
@JebGardener
3 жыл бұрын
During the failure event, I didn't know if you got crushed or what happened. Great effect.
@Bigelowbrook
3 жыл бұрын
It was a close call!
@alt-swe5503
3 жыл бұрын
Ambitious with a lot of learning for us all. I'd love to have seen a full success in the end. Hopefully you can employ what you learned and reuse the stuff in other projects so it will end up as a big win in the end. While figuring out the next step, why not let some grapes grow up to fill that space instead and put some strawberry's elsewhere?
@drmosfet
3 жыл бұрын
Small stainless steel cable for aircraft is what I've used in the past for medical overhead X-ray crane, with a zig-zag cable configuration to keep it true. I glad you're not using those rocks.
@Bigelowbrook
3 жыл бұрын
Early in the project I tried using the aircraft cable and couldn't get a good method to grab in the pulley.
@drmosfet
3 жыл бұрын
@@Bigelowbrook Why depend on pulleys friction for the main shafts that synchronises all the cables together, instead use a spool similar to the old way that boat steering used to work before the uses of single steering cable, basically you fix the cable to the spool and shaft, your spool will have two side for cable uptake left & right for baskets. Any way it just an ideal. Thanks for the video.
@Bigelowbrook
3 жыл бұрын
@@drmosfet I had a chat with a friend of mine last year with using spools. The main concern was keeping the cables on track as the wound around it. Perhaps I'll look into it again.
@drmosfet
3 жыл бұрын
@@Bigelowbrook Your pretty good with that 3d machine of yours. Although you might not need anything fancy, as long as you don't see any fraying on the cables.
@ToukoMies
3 жыл бұрын
How about using some bike chain and sprockets? That definitely wouldn't slip. To prevent water from accumulating to the end there would probably need to be a drainage on both ends, maybe even at the middle as well.
@Bigelowbrook
3 жыл бұрын
I considered the bike chain but they're fairly expensive and would probably rust (or maybe get oil into the system)
@chiminglee7438
Жыл бұрын
you can use Coco peat
@thomaswalker3157
3 жыл бұрын
I'm looking forward to the improvements.... And 2 equally share, I am rebuilding the transmission for the second time... We Humans learn more through our failures... Don't beat yourself up over this.... Think of how many folks don't ever try...
@studygodsword5937
2 жыл бұрын
It looks like if you used rope grabbing pulleys, hard fastened to the bars, and then put the bars on bearings (whole bar turning), that could work ! Also multiple drains or lower drain side, to avoid water pooling ! i would also make them shorter, 4 or maybe 6 units instead of 2 ! and some kind of quick lock for the pipe !
@khalidalghalayini2488
2 жыл бұрын
Keep on the excellent and hard work . Just to inform you that your clips are the most informative and perfectly presented . It's just time and your channel will reach millions . Thank you for your honest and perfect work
@veggiemush
3 жыл бұрын
What’s the motivation behind having pulleys in general? Either way, love the videos. Thank you so much!
@donsrestorations
3 жыл бұрын
Well heck. Sorry this failed. I really thought it was neat. So as they say, "back to the drawing board, hey?"
@Javinkay
3 жыл бұрын
Great video I’ve learned a lot and appreciate you sharing
@TilmanBaumann
3 жыл бұрын
Fantastic example of over engineering. But I would have thought it would at least work but just be annoying to use :D
@davidrediger6407
3 жыл бұрын
Edison said, with failure you know how to not make something. Keep on trying.
@chiminglee7438
Жыл бұрын
Coconut peat will be much lighter
@wolfmooch
3 жыл бұрын
no swearing.. good for you
@elmonik
3 жыл бұрын
Failure is progress!!!
@cc627
3 жыл бұрын
your greenhouse structure seems not suitable for such heavy stuff, beware brother ;)
@Javinkay
3 жыл бұрын
He went over the structure load in another video
@danny36120
3 жыл бұрын
would chains and sprockets not work better?
@Bigelowbrook
3 жыл бұрын
Probably, but they cost a small fortune and would probably rust.
@firepinto
3 жыл бұрын
Still pretty cool!
@자유인-n3f
3 жыл бұрын
👍👍응원합니다 👍👍🇰🇷
@larscw74
3 жыл бұрын
As long as you do not give up, you haven't failed, it's just in design, R&D takes a long time when you have a small team. Still awesome you are sharing these things.
@MJAldridge6
3 жыл бұрын
HAH, tell that to my ex wife...
@KarelRode
3 жыл бұрын
Failing forward. I liked hanging out with you until we did not :-)
Пікірлер: 37