🔥 Want a Diesel Site Adrenaline HPOP? Order One Today! www.thoroughbreddiesel.com/diesel-site-hpops/ ► Check Out Our Other Install Videos Here: kzitem.info/door/PLnxFEGfR52dhbBUrmZWnAuARh40MPZ-ED ► Check Out Our Other Ford Powerstroke Videos Here: kzitem.info/door/PLnxFEGfR52dj0-DiSxFOeQJkwDBqgWLT4 ★ Saving Diesel Lives! Check out our online store for performance products at: www.thoroughbreddiesel.com/ ☎ Give us a call for FREE ADVICE: (866) 737-4966 🎉 Please remember to SUBSCRIBE, LIKE, and COMMENT if you like our videos! It really does help us out! Thx for the support. kzitem.info ❤️ Join Our Diesel Community ❤️ ● FACEBOOK: facebook.com/Thoroughbreddiesel ● TWITTER: twitter.com/TbredDiesel ● INSTAGRAM: instagram.com/tbreddiesel/ ● PINTEREST: www.pinterest.com/tbreddiesel/ ● BLOG: www.dieseladdict.com/ ● SNAPCHAT: tbred_diesel
@Lisa-wh8tc
3 жыл бұрын
THOROUGHBRED DIESEL DOES NOT WARRANTY DIESELSITES PUMPS. BUYER BEWARE. JUST ORDER DIRECTLY FROM DIESELSITE. THESE GUYS ARE A JOKE.
@jamesmclellan8768
2 жыл бұрын
I have a 1999 f-250 with the 7.3 I bought my oil reservoir gasket and it looks just like the one in the video but mine doesn’t fit correctly any suggestions?!
@rockporttigger7138
2 жыл бұрын
@@Lisa-wh8tc 36 Month Unlimited Warranty DieselSite offers a full 3-year unlimited warranty. This warranty covers anything short of abuse, tampering and obvious physical damage caused by you. Warranties are VOID on any pump that has been tampered with.
@gixxer4eva
Жыл бұрын
Will this work for the T444E 7.3l engine as well?
@lw4609
3 жыл бұрын
I thoroughly enjoyed watching this video it looks to be a lot easier than I thought it would be I do believe I can take care of that myself now that I have watch this video.Thanks
@oldgold8236
6 ай бұрын
Thanks for the video Wade! My adrenaline was delivered yesterday I can’t wait to put it in this weekend 🎉🎉🎉
@thoroughbreddiesel
6 ай бұрын
You're welcome! Let us know how it goes!
@Rem1061
10 ай бұрын
FWIW, the biggest/quickest killer of a starter is low voltage. On an "inductor" which in this case means electric motor, if your voltage goes down, the current goes up to do the same amount of "work". Current is what causes heating, which will literally melt the bushings out of the starter. Having a jump from another vehicle, or a big battery charger is a savior of starters. Even if you are just beginning to try to crank one, especially when it has been run dry of fuel, jump it off.
@dawildcatz87
4 ай бұрын
You may be right but I don't think it's that serious. My 7.3 has 415k miles and for half of those the previous owner only ran one battery. Start became weak but never failed.
@Blake4Truth
Жыл бұрын
I can’t fathom how it’s easier to tighten the IPR and the oil line fittings after installing the pump. Sooo much easier to get that done on the bench.
@powerstrokediesel99
3 жыл бұрын
I love that yall left that clip in there when Wade was trying to get the IPR off the first time and couldnt get the socket off
@whoodiestyle
3 жыл бұрын
I use shampoo bottle pumps to remove oil from the hpop
@CysMix1
2 жыл бұрын
How do you get in the corners of the rez
@willthomas6911
2 жыл бұрын
Brilliant
@ramrod7566
2 жыл бұрын
I owe you a beer. I was just just thinking I need a pump to do this job and hit the comments to see if anyone suggested a pump in here lol. Hope I can get all the oil out of the pump before before I put it back in the bottle. That could kinda negate the purpose of shampooing.
@Tcw2019
2 жыл бұрын
That’s genius
@rconcord9
2 жыл бұрын
Excellent “how to” video. I don’t need to change my hpop but was interested in hearing your description on how to make the change. Good job 👍
@thoroughbreddiesel
2 жыл бұрын
Glad it was insightful!
@ZPrezton
10 ай бұрын
@@thoroughbreddiesel 62 and enjoyed the entire process. Love my 7.3
@miguelmendez4690
Жыл бұрын
I, love this video I, have a 7.3 thank you for this new video from NJ bless you America 🇺🇸 from Guatemala 🇬🇹
@akquicksilver
3 жыл бұрын
Great video. I wished I had done this when I rebuilt my IPR. That plastic o-ring on the IPR is actually a backup ring.
@mackmary3477
7 ай бұрын
I really appreciate the way you explained the entire process.
@thoroughbreddiesel
7 ай бұрын
You're welcome!
@philbinaz4521
3 жыл бұрын
Before starting all this ... degrease the engine! It makes seeing/holding parts and connectors much easier. And maybe remove heater hoses and fan belt to get them out of the way? great information here! Thanks!
@psd28
2 жыл бұрын
Pay for all that brakleen and i will
@PhilBinAZ1
2 жыл бұрын
@@psd28 ... just some engine degreaser and a power washer.
@brownh2orat211
Жыл бұрын
@@psd28 You degrease with brakleen? no wonder you are crying, Use a some purple power in a spray bottle and a hot water pressure washer, costs about $1.50
@carl2591
11 ай бұрын
I would have taken the serpentine belt loose at least to get it out of way.. 1/2 breaker bar and off it goes. for the rest it can be a bit of bear but not bad.. wonder if it might be good time to take the back pressure tube off to clean.. they get crapped up with crap over time. I found a square type weed eater line shoved down and put on a drill to moving it in and out when turning at a good speed works well.
@jamesfernandez6801
Жыл бұрын
The Adrenaline makes the 7.3 sound like a gasoline engine. Best investment in my truck I ever made.
@thoroughbreddiesel
Жыл бұрын
Thanks for the feedback!
@cccEngineer
Жыл бұрын
That sounds like a negative lol.
@shadowking9409
3 жыл бұрын
just a heads up if you get a 1 1/8 inch axle socket it will be long enough u dont have to worry about it getting stuck like that and they arnt to expencive
@kevinwest432
2 жыл бұрын
thats all fine and dandy, i purchased expensive valve cover gaskets with wire harnesses, after much trouble shooting discovered one of the gaskets was faulty. Was told would have to send both back. Put old gasket back on, felt that you were way to worried about making it good. Wont order parts from Thoroughbred.
@gregchamberlain8519
3 жыл бұрын
I really enjoyed watching your video, and looks like a great HPOP. that being said if your pump is working fine that's a lot of cash to dish out. the fuel millage increase if any would not make up for it. Cheers Greg
@juanvaldez6342
3 жыл бұрын
I took a shot every time he said IPR I'm dead lol. Cool product though
@thoroughbreddiesel
3 жыл бұрын
😆
@miguelmendez4690
Жыл бұрын
this very good video works I, love the video my friends my friend thanks 🙏 very much from NJ
@thoroughbreddiesel
Жыл бұрын
You're welcome!
@richfarfugnuven6308
2 жыл бұрын
I use a suction pump with a plastic tube attached...then I refill the pump with Archoil 9100.
@Matthew-id8uu
3 жыл бұрын
There is no need to remove the fuel bowl and reservoir. You can do it with them in place
@TheBlueScarecrow
2 жыл бұрын
I'd do the fuel bowl. The reservoir, leave it be.
@Blake4Truth
Жыл бұрын
And it’s WAY easier to tighten IPR and oil line fittings with the pump out on the bench held by a vice, prudently of course to avoid damaging the cast and machined aluminum pump housing.
@JoeJames-k3e
5 ай бұрын
3/4" drive deep (forged) socket from tractor supply fits ipr and goes all the way on
@_Machine631_
3 жыл бұрын
Was I the only one who was waiting for him to clean all the oil/fuel in the valley and then cringed when he didn't and just left it all there?
@TheBlueScarecrow
2 жыл бұрын
Me 2.
@psd28
2 жыл бұрын
Im lazy and like leaving my engine dirty. Lol
@brooksbullock8806
2 жыл бұрын
No
@kevinmurphy3464
7 ай бұрын
Hahaha… My anal retentiveness kicked in and was saying the same thing. You went to all of the work to get to everything so clean the valley and everything else that you can get to while you’re there.
@PasoGirl7
2 ай бұрын
Right there with ya!
@BobTheBreaker9
3 жыл бұрын
Did he show how to remove the IPR twice?
@jackm4996
3 жыл бұрын
Awesome video!! Thanks Wade! 🇺🇸🇺🇸
@thoroughbreddiesel
3 жыл бұрын
You bet
@Trobertsdsgmach1
3 жыл бұрын
I like the new and old mirror style. Been there before haha
@anthonydowns45
3 жыл бұрын
Great video and information. I will definitely look into doing this upgrade.
@thoroughbreddiesel
3 жыл бұрын
Glad it was helpful!
@charlieerkens1443
Жыл бұрын
The Adrenaline HPOP installation instructions say to NOT reinstall the check valves in the ports so the pressures in the heads can be balanced. This is for anyone who may have been confused.
@XAllky
7 ай бұрын
Ahhhh there is the answer I was looknfer. Thanks
@stephenjones7622
2 жыл бұрын
When you said remove the Spring check valve in the Hpop . Do mean to leave it out? And if so What does that do for it or in other words how does that help ??
@jeffstrauch6273
2 жыл бұрын
Why aren't the spring check valves used when you have changed hoses to a compression type fitting and hose?
@reneherrera4338
2 жыл бұрын
You don't need the springs...
@mitchd6311
9 ай бұрын
i wish my neck,shoulders and back were not bad, i would do this to my motorhome.
@cam3002
2 жыл бұрын
Considering the cost of the HPOP and the effort to change the IPR, what is the reason to reuse the old IPR? Seems logical to replace the IPR since you are in there anyway. Thoughts?
@thoroughbreddiesel
2 жыл бұрын
Agree 100%. In this case, we had just done a IPR replacement and video the month before.
@appliancerepairshorts
3 жыл бұрын
Nice installation
@thoroughbreddiesel
3 жыл бұрын
Thanks
@n5ifi
6 ай бұрын
Flow more oil huh? What did we open up here to flow more oil? Are we flowing more oil simple because the pressure is higher? Unless we changed something in the system to open it up to more flow how can we flow more oil? If it needs 3000psi and its getting 3000psi (just picking a number) how can we flow more oil without increasing the pressure or opening something up in the system (bigger hole)? There must be a opening of larger size if the pressure is the same. I'm pretty sure you guys didn't open anything up in the system, heads or injectors etc etc. Where is the increased flow coming from? Are we just bypassing more oil? Do we need increased pressure? Does increased pressure put a strain on other parts? Trying to understand where this greater flow is coming from. Maybe the stock pump is just on the marginal side? Mines been running now for 25 years so....Still runs like a top. I doubt its marginal.
@fluffykittynoodles
Ай бұрын
The IPR regulates pressure leaving the pump. Pressure and volume aren't tied together
@fluffykittynoodles
Ай бұрын
The IPR regulates pressure leaving the pump. Pressure and volume aren't tied together
@n5ifi
Ай бұрын
@@fluffykittynoodles How does more volume help me?
@jmc6940
Жыл бұрын
What are the flow specs compared to factory pump? I fail to understand how more flow is necessary.
@thoroughbreddiesel
Жыл бұрын
Increase oil flow is necessary for demand. As with towing or high performance applications, increased oil flow will allow the injectors to do their jobs properly and without damage that can be caused by lack of oil supply to them. For lack of a better word.
@Blake4Truth
Жыл бұрын
@@thoroughbreddiesel Are you saying that the stock pump is deficient in its ability to supply the stock injectors on a stock engine, or are you referring to tuned engines?
@travisthompson3700
2 жыл бұрын
Best to "Walk an O-Ring" up with a pick vs Roll
@brada1997
23 күн бұрын
I put one on. It grenaded itself in 3000 miles and cost me 2 of my rather new injectors
@bearfoxx1
Жыл бұрын
Change the Excursion(Eddie Bauer Edition) to “Edna” lol definitely goes better lol
@alpha2gproject783
3 жыл бұрын
I'm assuming the job is quite a bit easier if you have the earlier model trucks?
@robertbramblett9124
10 ай бұрын
Do you recommend the oe cast or the bullet lot of difference in price to me
@waynemcconnell4559
3 жыл бұрын
Great video Wade I ordered one and will use the old IPR and was wondering about the future upgrade injectors, I have a 2002 F350 XLT and running stock injectors and I believe they are 140cc and was wondering if the 160cc that are used in the International blocks would be a better upgrade or any recommendations from your knowledge would be great. I tow moderately the camper 11K and daily driver. I know the 7.3 are workhorses and not a 1/4 mile race horse and myself I am not into drag racing.Anyways getting to point what size of injector would you recommend? Thanks and Happy 7.3 Day
@CRAZEDX100
3 жыл бұрын
140 to 160 won't be much of a noticable gain. I would go with 160s with a 30% larger nozzle or better yet 180s with a stock or 30% larger nozzle.
@TimothyElliott-k3v
4 ай бұрын
I did not see you put the check valves in the adrenaline pump. Are they not needed for this?
@thoroughbreddiesel
4 ай бұрын
No, they are removed to increase flow.
@michaelwalker1152
2 жыл бұрын
Nice presentation thankyou
@thoroughbreddiesel
2 жыл бұрын
Glad you liked it.
@mavcar38
3 жыл бұрын
Great video as always👍🏻
@thoroughbreddiesel
3 жыл бұрын
Thanks 👍
@nolanbrown1622
3 жыл бұрын
So the check valve that is in my stock pump I reuse input in the adrenaline pump? I got a little confused since the pump that you took off of that truck didn't have a check valve and it didn't look like you put one in the adrenaline pump.
@crashfields14
3 жыл бұрын
Same here. He said remove it and then put it back in. Is this a remove and don't reuse or remove and reinstall in the new pump?
@lblackburn_6.0
3 жыл бұрын
You take it out and don’t put it back in throw it away lol
@KMCole
3 жыл бұрын
So which is it? Keep the check valves and springs or chunk????
@BobTheBreaker9
3 жыл бұрын
Yes it was confusing there... no explanation on removing the hardware from the old one
@vincebotkin1960
Жыл бұрын
The adrenaline pump is good until it is not. They are reman pumps with their parts inside. My pump failed in a year. Dieselsite was good about it but I had to put a OEM reman in, didn’t have time to wait. ( you have to send the pump back and then they test it and then wait for it to ship back ) Mine was bad, blown relief valve. So they sent me a new one. Now I have a new pump setting on the shelf.
@TheBlueScarecrow
2 жыл бұрын
Great R&R video...Thanks! But the pump is way overpriced.
@larryleblanc1551
Жыл бұрын
When telling us to remove the check valve, is this a good time to tell me what I will be doing with that check valve?
@thoroughbreddiesel
Жыл бұрын
Light lubrications is advised. I keep the check valves for my ever growing hoard pile.
@americanrebel1977
Жыл бұрын
@@thoroughbreddiesel when in stalling the new pump even if it's a different brand oem pump can the check valves spring be let out or must the be put in the new pump
@tbirdpimp07
3 жыл бұрын
More interested in the creeper lol
@jamesemmeneckersr.1875
2 жыл бұрын
where did you get creeper?
@RustyCarnahan
2 жыл бұрын
So the check valves are NOT used with the Adrenaline HPOP?
@thoroughbreddiesel
2 жыл бұрын
The check valves are NOT used with the Adrenaline.
@reneherrera4338
2 жыл бұрын
Nope...trust me..I did it and works perfecr
@sbag11
3 жыл бұрын
I've seen at least one video where it appears the guy did an HPOP swap WITHOUT removing the reservoir. Is removing the reservoir necessary?
@thoroughbreddiesel
3 жыл бұрын
It makes the job a ton easier.
@sbag11
3 жыл бұрын
@@thoroughbreddiesel Thanks!
@alexriel6013
2 ай бұрын
Do you remove both springs from your hpop or just the front one?
@thoroughbreddiesel
2 ай бұрын
Both.
@LemonySnicket-EUC
2 жыл бұрын
What over top creeper is that ?
@ericpolston7200
3 жыл бұрын
are you supposed to fill the oil reservoir before you put the fuel bowl back on?
@ericpolston7200
3 жыл бұрын
yup, never mind. lol
@RileyPower-gg2yb
4 ай бұрын
Have 7.3. Only. Runs. On. R Bank. Disconnect. Ls. No change
@HIDYMCX
Жыл бұрын
Great video
@thoroughbreddiesel
Жыл бұрын
Thanks!
@dolwinlee-wong7927
2 жыл бұрын
Great video. Thank you
@kennethloban9440
Жыл бұрын
Does the adrenaline pump use the factory check valves with aftermarket high oil pressure lines?
@thoroughbreddiesel
Жыл бұрын
Stock oil lines can be used, but the check valves are to be removed.
@crashfields14
3 жыл бұрын
What parts cleaner did you use before the reinstall and should we use loctite on the bolts when reinstalling? Thank you in advance. Great step by step!
@thoroughbreddiesel
3 жыл бұрын
Just used brake clean on the reservoir. Loctite was not called for on reinstall. Thank you!
@bamalandfarmstead820
3 жыл бұрын
My Adrenaline HPOP shot craps in two years. 15k miles put on it. Not impressed.
@Turbotalkin
3 жыл бұрын
I think im gonna go CnCFab
@33valleys28
3 жыл бұрын
What did you end up doing on failure ?
@bamalandfarmstead820
3 жыл бұрын
@@33valleys28 it was out of warranty but they did an exchange, cost me $400 plus their broken one back. The new one has been doing good.
@33valleys28
3 жыл бұрын
@@bamalandfarmstead820 any reason they give for failure? Have they upgraded in last two years ? What are you doing w your truck primarily ? Thanks. I’m just looking to upgrade and can’t decide yet.
@bamalandfarmstead820
3 жыл бұрын
@@33valleys28 no reason giving for failure. They now come with a 3 year warranty which is good. I tow 18k camper, tractor and skid steer Takeuchi TL 140 just under 10k.
@TacticalTightwad
3 жыл бұрын
Did we remove the IPR twice? 21:08 and 23:51?
@thoroughbreddiesel
3 жыл бұрын
Indeed we did. Guess we had to make sure it was extra more removed. Joke aside looks like an editing snafus'. I would recommend using the second clip as Wade must have had a reason for re-doing that shot.
@larryleblanc1551
Жыл бұрын
Should I put a bit of grease on my reservoir base plate o ring before installing to Engine?
@roys04stx
Жыл бұрын
What is the stool work rest thing you are using to get to the engine, I've been trying to find something like that. With the 7.3 sitting in the tuck so high to begin with itsa task getting to stuff at times.
@thoroughbreddiesel
Жыл бұрын
They are called topside creepers.
@miguelmendez4690
Жыл бұрын
I, send my like 👍🏼 to you thank you
@thoroughbreddiesel
Жыл бұрын
Thank you too!
@jamesmclellan8768
2 жыл бұрын
I made the most ignorant mistake I put my ipr on wrong I put the sleeve/coller on then my solenoid then the tin nut I fought with this truck for a month could not figure out why I couldn’t get my icp pressure above 200 I ended up watching a video and just happened to see that I had it on ass backwards the solenoid goes on first the sleeve/coller then the tin nut and she fired right up trust me I feel so stupid
@tonymars6003
2 жыл бұрын
How I know when is time to replace mi high pressure oil pump??
@thoroughbreddiesel
2 жыл бұрын
No start, unable to make commanded oil pressure, etc. This is a nice upgrade to any 7.3 trucks to make CORRECT oil pressure throughout the power regiment. IE, make more power and be more efficient when needed.
@bvr1962
2 жыл бұрын
question did you delete the check valve in you system and what are the befits of doing so
@thoroughbreddiesel
2 жыл бұрын
We do, as required by Dieselsite. It allows more flow from the fittings.
@RileyPower-gg2yb
4 ай бұрын
I have. 02. E350. 7.3. Won't. Start. How. I. Ck inj drive. Module that ks
@thoroughbreddiesel
4 ай бұрын
Codes? What is high oil pressure?
@thegeneralstrike6747
3 жыл бұрын
Any chance yall hooked a Guage and an HPOP static test. 60-90mph what did the psi level off @?
@marinusdedreu3833
3 жыл бұрын
Dependent on RPM and throttle demand not mph
@BobTheBreaker9
3 жыл бұрын
Why do u need to take the check valve out of the old pump?
@thoroughbreddiesel
3 жыл бұрын
Increase oil flow.
@willieshilljr3734
3 жыл бұрын
Hello : What’s the link and Name of the creeper you use ?
@thoroughbreddiesel
3 жыл бұрын
Topside Creeper, one can be found here: www.vevor.com/products/vevor-foldable-topside-creeper-easy-engine-access-creeper-for-garage-or-worksho-1?gclid=CjwKCAjwy7CKBhBMEiwA0Eb7alPr0Aq5aZT2BKEjJeCaRdv9JFHMvL02hBdtl43gNZDtXsLxW-HmRBoCYigQAvD_BwE
@thevikingwolfpack836
2 жыл бұрын
Should put 10w30 oil in it it'll runn better an better mpgs
@jacksonbishop6506
3 жыл бұрын
So if you have your check valve and spring in where the fitting in why do you have to take it out if you’re just using the fitting
@thoroughbreddiesel
3 жыл бұрын
You just don’t want to reinstall them into the ADRENALINE pump. Only install the fittings.
@jacksonbishop6506
3 жыл бұрын
@@thoroughbreddiesel thank you!
@stefancosenuik5432
17 күн бұрын
What does IPR stand for?
@tonibrown7096
Жыл бұрын
did you need to bleed the oil rail ?
@thoroughbreddiesel
Жыл бұрын
It is bled through the cranking process.
@flyalaska2021
2 жыл бұрын
Did you install the check valves off camera?
@thoroughbreddiesel
2 жыл бұрын
No, we refer in the video that the check valves are removed with the Adrenaline pump.
@jamesmclellan8768
2 жыл бұрын
@@thoroughbreddiesel what about a new Ford hpop do you install the check valves then
@gixxer4eva
Жыл бұрын
Do you prefill the hpop itself before installing?
@thoroughbreddiesel
Жыл бұрын
No, and truthfully with correct cranking sequences, its better for filtered oil to hit the HPOP first.
@MarcosLopez-dl9xc
3 жыл бұрын
So you do not use the check valve
@thoroughbreddiesel
3 жыл бұрын
Correct, you do not reinstall the check valve springs when installing a Adrenaline HPOP.
2 ай бұрын
Do you know if the HPOP can be delivered to Australia. I've a 03 7.3.
@thoroughbreddiesel
2 ай бұрын
Give us a call 859-737-4966.
@frankhackett771
Жыл бұрын
On the hpop lines out how big a difference if any is there if feed lines opposite like pass feed on first and drvr on the other one. Will this cause any issues with the engine performance. Thanks
@jerridehlinger9689
Жыл бұрын
can you run this pump without a tune?
@thoroughbreddiesel
Жыл бұрын
Absolutely.
@carolvelador9129
2 жыл бұрын
What turbo upgrade do you recomend no 95 f 350 7.3 l stock
@thoroughbreddiesel
2 жыл бұрын
What is your target horsepower and will you be running stock injectors? If you are just running tuning we actually offer a couple different drop-in turbos that will work. Check our site for upgraded turbos and if you have any questions give us a call at 859-737-4966.
@andyhenderson8619
3 жыл бұрын
I like the video. nice job, I am looking forward to doing the same.
@thoroughbreddiesel
3 жыл бұрын
Thanks. Go for it!
@reneherrera4338
2 жыл бұрын
Need help 911...If I put the HPOP Adrenaline Do I have to change my LPOP for a high volume LPOP?
@thoroughbreddiesel
2 жыл бұрын
No, the stock LPOP is sufficient but a high volume LPOP is always a nice addition if you will going farther with your build.
@reneherrera4338
2 жыл бұрын
@@thoroughbreddiesel I bought the adrenaline with you guys and my oil pressure still going down at 55m/h. Any tips?
@carolvelador9129
2 жыл бұрын
Hello what upgrade turbo do you recomend no 95 f 350 7.3 l stock engine tus on abvance
@nickhayden1085
2 жыл бұрын
Does adrenaline hpop work with stock injectors? I think I might be changing it first before I get bigger injectors
@reneherrera4338
2 жыл бұрын
Yes it works perfect...My question is If I put the adrenaline hpop Do I have to change the lpop for a high volume lpop???
@cavemanjoe79
Жыл бұрын
@@reneherrera4338 You may want to change the LPOP at the same time or have it changed before, I have almost 400,000 miles and had the LPOP changed when I had the up pipes done. Hopefully the HPOP will be next during this summer.
@texanbalaban6777
3 жыл бұрын
I perused the site and didn’t see much for the ol 6.9L 🤔
@idreamofdragonso5677
3 жыл бұрын
A little late now but the old 6.9s and 7.3s dont have much of an aftermarket other than banks and R&D performance I believe
@germanyanabarrios3917
3 жыл бұрын
Thank you Sr, God bless you
@peterm3964
3 жыл бұрын
What has God got to do with it .Virtue signaller
@gman8760
3 жыл бұрын
REPLACE THE IPR!!!!! No point in putting an old one back in, not to mention its a pain in the ass to replace once the pump is back on....
@cccEngineer
3 жыл бұрын
It's not difficult at all. Just use a 29mm axle nut socket
@gman8760
3 жыл бұрын
@@cccEngineer not the point, its out now replace it. why do stuff twice. like doing calipers and using old brake pads
@FredFlintstone21
Жыл бұрын
@@gman8760 he replaced it a month before this video
@idmooseman
2 жыл бұрын
I started watching your video because I am interested in this HPOP swap. The constant barrage of banners in the lower-left corner of the screen was so distracting and annoying I stopped watching your video and looked for others. I realize this is an older video and I hope you've put those banners on a timer to display once every 15 - 20 minutes or so, especially in videos of this length.
@JoseDiaz-bk9mh
6 ай бұрын
I can’t get my oil pump gear back on
@thoroughbreddiesel
6 ай бұрын
Give us a call (859) 737-4966.
@travissk5036
2 жыл бұрын
Thankyou
@thoroughbreddiesel
2 жыл бұрын
You’re welcome 😊
@tomalexander7313
3 жыл бұрын
Will they work for obs trucks?
@thoroughbreddiesel
3 жыл бұрын
Different part numbers but yes. www.thoroughbreddiesel.com/diesel-site-hpops/
@33valleys28
3 жыл бұрын
Looking same thing. Did you get one ?
@jimbob394
2 жыл бұрын
Can we get a Wade sticker that says "Hi!"
@dirtbikesanddiesels978
2 жыл бұрын
Time for new batteries
@thevikingwolfpack836
2 жыл бұрын
Whats your mpgs running up to sense the install?
@WilliamStewart1
2 жыл бұрын
Adrenaline pumps are only worth it if you're going to run bigger sticks. They are double the price of a replacement.
@LemWalters
Жыл бұрын
How much is the pump
@thoroughbreddiesel
Жыл бұрын
www.thoroughbreddiesel.com/diesel-site-hpops/
@brianhigginbotham4489
3 жыл бұрын
Just curious, are these hpop’s stock style or to support modded injectors? Reason I ask is I had some 175cc from ol swamp donkey years ago on a 95 7.3 & I never had enough pump to fully utilize them. I tried the 99 & up pump with little success & really didn’t like the long cranks due to the resivor draining back with the different ipr setup Thanks for the video!
@brianhigginbotham4489
3 жыл бұрын
In edit I saw the ending finally lol
@jamesmclellan8768
2 жыл бұрын
I broke the bolt on my exhaust back pressure plate that coveres the 18mm bolt I had to drill it out I got miner shavings in the gear (hpop) what’s the best way to flush or clean that out? Def do not want to mess my truck up any advice will help
@thoroughbreddiesel
2 жыл бұрын
This is not what you want to hear but I would pull the pump back out and clean everything out of the valley at that point.
@limojag
3 жыл бұрын
ok, what advantage to installing this pump in place of a stock system? with a stock engine, why is the advantage of adding this pump?
@thoroughbreddiesel
3 жыл бұрын
More oil flow on demand. This pump will really shine on the stock trucks that tow often and have correct tuning. Basically, the truck wont have to work as hard.
@limojag
3 жыл бұрын
@@thoroughbreddiesel , what I need to find is what I can do to dial in the 7.3 in an ambulance (95 E350), I was looking to do the 6 switch, and the wicked compressor upgrade, I was also thinking on having the heads shaved to bring up compression up to 17-1, I am not turning it into a monster, just something more reliable and efficient, what do you think?
@wildrosegarage4208
3 жыл бұрын
@@limojag stock compression is 17.5 :1 shaving the heads would make it higher no need for that your not hot rodding a 283 chevy here. I would just make a intake out of a napa 6637 filter, replace muffler with a piece of pipe or a glasspack, shim the fuel regulator with a BB for a BB gun and call it a day. You could throw tuning on it to add power but I have found zero difference in mileage running tunes.
@jorgeaviles4801
2 жыл бұрын
is the new pump comes with new check valve
@briand9137
2 жыл бұрын
No, you don't use a check valve with the new pump. You obviously don't need a check valve with the old pump, either, since the one he took off didn't have one.
Пікірлер: 243