Nordic gold. It contains no gold, being composed of copper, aluminium, zinc, and tin. Its composition is 89% copper, 5% aluminium, 5% zinc, and 1% tin.
@m.moe.productions65476
29 күн бұрын
Sometimes lead to fool people
@MihSterh
29 күн бұрын
I'm 104% an amateur in this field, thus professional amateur. Professionals are experts, so.. As an expert I would say you're probably right, no real gold in that pour
@michaelmain1990
29 күн бұрын
I was looking for this name
@Thor555555
29 күн бұрын
never heard that name but i´m alo be sure it´s what we call Aluminium-Bronze
@knightsun2920
28 күн бұрын
Tend to aggrege with the you. Linus Sabbatian from LTT had difficulty in a proper lab, porosity was an issue when making his 24k X-Box controller
@dr.ragequit9950
29 күн бұрын
Next project: concrete pistons I’d say they’d get smashed immediately.
@D.Will.C.
29 күн бұрын
Hydraulic Cement would last a hair longer.... 😅
@jwalster9412
29 күн бұрын
The heat from combustion would evaporate the water into the concrete and they would disintegrate
@Viper69X
29 күн бұрын
Rubber pistons with gold piston rings
@RSx94
29 күн бұрын
A polished stone piston wouldnt be impossible? If it gets polished and fittet with rings :P
@hulkgqnissanpatrol6121
29 күн бұрын
Refractory cement! 😂
@cpuwizard9225
29 күн бұрын
Jesus Christ, the merch shop must have really taken off.
@RollingRoadEFI
29 күн бұрын
I was thinking the same thing. Anyone who knows the first thing about gold knows roughly how much money he was just holding..... Time to call in sick and make a run for it lol.
@skyoreece9805
29 күн бұрын
Russia never pays for anything anymore
@themancalledx1342
29 күн бұрын
Seriously 😂😂
@jwalster9412
29 күн бұрын
Maybe it's pyrite
@AndrewTSq
29 күн бұрын
Real gold is soft, so its not gold.
@clarktransport1312
29 күн бұрын
It looks like Nordic gold. Basically Brass. Copper with zinc and some other trace amounts of base metals. I’ve made bars like it myself. It’s fun to fool people.
@YP3CA
29 күн бұрын
It's real Gold that's made out of Brass
@tylerdurdin8069
29 күн бұрын
It's an alloy. Could be brass most likely because the aluminium alloys that make that color would be way to soft.
@AutodidactEngineer
29 күн бұрын
Aluminium bronze is harder than steel
@davidblalock9945
29 күн бұрын
It’s an alloy called Nordic Gold. 89% Copper, 5% aluminum, 5% zinc, 1% tin.
@PREDATEURLT
29 күн бұрын
@@AutodidactEngineer But steel has higher melting point.
@timramich
29 күн бұрын
@@AutodidactEngineer It is only harder than really junky steels. Not even close to any decent steel alloys.
@ItsDaJax
29 күн бұрын
@@PREDATEURLT So brass or bronze wouldn't hold up to heat like steel would, in this situation?
@marthelerand5073
29 күн бұрын
Wake up garage 54 posted
@ultimatethunder
29 күн бұрын
Good morning🥱
@21ozmar
29 күн бұрын
Fools gold
@michaelgrimes9942
29 күн бұрын
also known as iron pyrite
@ChaotiX1
29 күн бұрын
fools gold is pyrite. This is nordic gold, a brass alloy
@cobaltpica
29 күн бұрын
Machinist here.. that is definately brass. The colour and the chips are a dead giveaway.
@RSx94
29 күн бұрын
1:09 No way this is a gold bar. A real gold bar this size weighs about 12kg
@ChaotiX1
29 күн бұрын
HAS to be nordic gold, a brass alloy. Nobody would DARE destroy a brick of gold worth over 200 thousand US dollars unless they were the Joker
@dorraj4685
29 күн бұрын
HAS to be, unless it's brass
@tonybundy8185
28 күн бұрын
Have you seen WistlinDiesel???
@ChaotiX1
28 күн бұрын
@@tonybundy8185 yeah, he likes to destroy things and laughs at people who cry about it. hes literally the joker
@6P3-MK4
27 күн бұрын
@ChaotiX1 not "literally". Because he's literally not the joker. Learn the definition of words people.
@poongusboongus6438
26 күн бұрын
@@6P3-MK4from the oxford dictionary: used for emphasis or to express strong feeling while not being literally true. "I was literally blown away by the response I got"
@Chris_Cable
29 күн бұрын
Nordic Gold
@Bzz637
29 күн бұрын
u can tell those are brass just by the way the chips come off on the lathe.
@DaftyBoi412
27 күн бұрын
I could tell from the poor, gold doesn't have slag like that, nor does it crystalize the way this alloy did (mind you it was probably like -20 out there at a maximum so I can't be sure of that last part at them temps, but considering it's not actually gold, I'd hedge that it would still hold true).
@johnkradoska1577
25 күн бұрын
Yes
@crakkbone8473
16 күн бұрын
Nope it’s real gold.
@1982seba
29 күн бұрын
Brass, the slavic gold 😆
@engineprojects
29 күн бұрын
How to smuggel gold .... build an engine out of it 😂😂😂
@droseyz
29 күн бұрын
There’s a Russian tv show where a guy buys an old lada and it ends up being made of gold. The name of the show is lada gold.
@MushookieMan
29 күн бұрын
There was recently a gold smuggling case where the smugglers had disguised the gold as helical screws, gears and other machine parts. There's a picture in the story.
@happygarage6310
29 күн бұрын
No matter what they're made of, you guys are out there, answering questions I didn't have, but need to know, and for that, I thank you.
@tinkerne-round4079
29 күн бұрын
Its called nordic gold. Its an alloy contaong copper, aluminum, zink, and tin. Looks like gold little harder and lighter than gold.
@peraz968
27 күн бұрын
Little lighter? gold weights abaut double as much. On that gold bar kind of size it means abaut 5 kg difference. I would not say a little..
@EpicATrain
29 күн бұрын
That's def brass, you can see the tarnishing.
@yellowjacketf4i
29 күн бұрын
brass
@bullbutter9699
29 күн бұрын
BALLS
@All_I_can_say_is_Wow
29 күн бұрын
monkey
@anibalbabilonia1867
29 күн бұрын
@@bullbutter9699👋🤣👍
@katieandkevinsears7724
29 күн бұрын
Two drawbacks of gold in an engine. It's soft and it's heavy.
@briancanfield5658
29 күн бұрын
Gold valves would break pretty quickly
@guily6669
29 күн бұрын
Can always gold plate other metal but would be pretty pointless 😁😎
@mike289homebuilt5
27 күн бұрын
sodium filled valves were used in heavy duty engines
@vitor900000
29 күн бұрын
99.9% Brass.
@hughjass1835
29 күн бұрын
With so many mixtures to make brass there is no 99.9% brass. As soon as you add tin to copper, it's 100% brass
@vitor900000
29 күн бұрын
@@hughjass1835 It can't be 100% pure because there can be nom alloyable materials embedded/locked into it. Getting anything to be 100% pure is almost impossible.
@Colorado_Native
29 күн бұрын
@@vitor900000Yes, very true. One thing I learned in the military is there's no such thing as pure BS. It's always contaminated with a little fact.
@kingkong81icloud
28 күн бұрын
@@Colorado_Nativeyes there is but it’s gold bars , you have to make It 9 carat or 24 carat or it’s too soft to make things like gold rings and chains, even though these are probably using brass
@DaftyBoi412
27 күн бұрын
@@kingkong81icloud Under lab conditions, purities of 99.999% Gold have been created. However, 100% purity has never been reached. A few key reasons: Trace elements like silver, platinum, and palladium are nearly impossible to remove. Air contact introduces contaminants. Purity decreases over time. Limits of testing equipment - guaranteeing "100% pure" is physically uncertain.
@GaryWhittingham
29 күн бұрын
oh dear, G54 going down the fake post route now...
@nickmcwilliams685
25 күн бұрын
Rewatch around 35 seconds, they tell you to post what you actually think they used to make the valves. Click bait, sure, but they are knowledging that the valves are not actually gold. It looks like Nordic gold to me, but I'm no expert.
@mjr643
24 күн бұрын
Also remember it takes a few weeks for BMI? Russia the translate them, and what was the month it was posted again ? (My guess April Fools Joke video)
@911mickk
24 күн бұрын
GOLD IS A SOFT METAL, NOT BUYING IT....
@SpecialAgentJamesAki
28 күн бұрын
I believe some sort of copper and tin mixture most likely. Whatever it’s made of garage 54 has great machining skills to cast and cut their own valves! 👍👍
@kaleb_gearhart6789
29 күн бұрын
I love these guys so much the shit they come up with is hilarious 😆
@Kenji1685
29 күн бұрын
In some applications titanium is used to make valves. Titanium can also be anodized to be yellow. So it's possible to make perfectly functional valves vaguely resembling gold. These are obviously brass valves, but it's a pretty cool experiment.
@Arcella1981
29 күн бұрын
Yeah I think its brass, when the valves are on the table they look almost exactly like trumpets
@android584
29 күн бұрын
This almost seems like too simple of an experiment for Garage 54 these days.
@stevenwithanS
29 күн бұрын
Brass. Gold wouldn't last a minute.
@fabiospiesanzotti
29 күн бұрын
YES THIS IS BRASS =)
@mui7281
29 күн бұрын
Amazing content.
@rp42069
29 күн бұрын
You have a very talented crew! 👏
@anibalbabilonia1867
29 күн бұрын
That looks like brass!! But if it is gold! You fellas must be making a killing with your merch!👌😂👍
@superduder
29 күн бұрын
april fools stock?
@mendaliv
29 күн бұрын
That's what I'm thinking. The non-dubbed video probably dropped on 4/1.
@android584
29 күн бұрын
It was uploaded on 6 April on the Russian channel.
@superduder
29 күн бұрын
Perhaps they filmed this one and thought. "You know what? We can do better!"
@kestertroy
11 күн бұрын
Next, I'd like to nominate diamond-coating the valve chamber and valves. It should cost less than this project. It'd be interesting to see if the engine efficiency gets improved.
@twatdidusay304
29 күн бұрын
🤣 you can tell that it's brass because of the way that it is 🤣🤣.
@konic40
29 күн бұрын
The schmell of it, the look of it, the taste the texture. Say it: i love gooooolllld!
@iancarney3082
29 күн бұрын
Was waiting for this comment.
@Nathriel
29 күн бұрын
Ok Goldmember 🤣👍
@VagrantCode
29 күн бұрын
+1 for brass
@markestep
29 күн бұрын
Would have been interesting to mic the stems to check for mushrooming as well as checking the length against a stock valve.
@Punky-Boy
29 күн бұрын
How much compression gives golden valves? How much weight did they lose?
@u.e.u.e.
29 күн бұрын
Is this the engine block with honed and polished cylinders??? Maybe that's why the cylinder head looks so different in each of the 4 combustion chambers. Brass and bronze conduct heat better than steel. So the intake valves are colder and accumulated more sud.
@dylanshepherd6232
25 күн бұрын
Yknow im kinda thinking about this. Honestly a softer metal just for the seat doesnt sound too bad of an idea because in theory, wouldnt it help form to the head when it seats and seal it better? Let me know in the comments if this has been tried or if its just a bad idea and why.
@ravinking1
27 күн бұрын
Y’all should do a before and after of the New Motor Oil Restore & Protect by Valvoline. Personally I think it’s just like any other oil.
@crakkbone8473
16 күн бұрын
That’s a lot of gold! 😂
@CNCmachiningisfun
27 күн бұрын
This is just the thing for my solid diamond engine block :) .
@pauliussvirskas6734
29 күн бұрын
These ladas are amazing
@XxRaidenxXminecraft
29 күн бұрын
thats nordic Gold!
@twocvbloke
29 күн бұрын
That's some brassy-looking gold there.... :P
@blackriflex39
29 күн бұрын
the most money you guys have ever put into a ladda engine lol
@DaBongiorno
29 күн бұрын
Gold has a melting point right above lead..to soft also
@rotary_rsr9794
28 күн бұрын
the green and white residue from the molten metal indicates the presence of zinc. The colour and the fact there is zinc means the metal is brass
@importsstillsuck
29 күн бұрын
That youtube monetization ain't no joke
@loganleborgne420
29 күн бұрын
🤣👍🏻👌🏻
@RetroScythe
29 күн бұрын
The funny thing is youtube hardly pays their creators what they deserve, unless you are a massive channel, you're gonna struggle to get more than £100 a month.
@TheGrobe
26 күн бұрын
That’s true brass is pretty expensive these days!😂
@markhartranft1550
29 күн бұрын
just by how it looks and way its sticking/splitting maybe nordic gold (copper alloy)
@jonathanryan2915
29 күн бұрын
Nice round headlight Lada wagon!
@dalesideroadclassiccarwork9038
26 күн бұрын
They are made from brass. If they were gold, the valve heads would have snapped off on the first turn of the key. Made from brass I was surprised that the stems didn't expand on the exhaust valves locking them open. Cool engineering though, well impressed.
@Elbert844
29 күн бұрын
Float those gold valves!😂😂
@mattrockman1028
29 күн бұрын
you guys should make ratio rocker arms, check if you can get any more valve lift. maybe cut the pistons to make room lol
@ovalwingnut
29 күн бұрын
Ormolu (copper zinc alloy). You guys R the "Gold Finger Mechanic Whisperers". Cheers!
@thomasechols8834
29 күн бұрын
either solid gold brass or nordic gold, which is mostly copper but has aluminium and zinc in it.
@shrapnut7612
29 күн бұрын
I would say brass, bronze would be too brittle and gold would melt. Gold melts at 1,948 Deg. F, combustion chamber temps 2500-4500F
@cycoholic
29 күн бұрын
Is it a brass/zinc alloy?
@janlassen6101
28 күн бұрын
I notice that the Color on the video is turned up to make it look a bit more like gold.
@user-pwfus
28 күн бұрын
You guys should make Titanium valves now that would be amazing imagine the beating they would take and how they would sound :). keep up the hard work.
@ussdiscovery6912
23 күн бұрын
Brass! A gold bar that size would be worth way into the millions! Plus gold is the softest of most metals
@AnalogDude_
29 күн бұрын
Unique idea.
@bigjay875
29 күн бұрын
That's nortic gold!
@roysampson182
29 күн бұрын
The way it machines / turns I'd say brass, or some similar kind of alloy.
@plupyduplupydu1369
27 күн бұрын
Waaaaaayyyy too much work-very good show thank you
@friskydingo5370
29 күн бұрын
These guys rule super awesome 👌
@bushyboy8376
22 күн бұрын
Nearly a million subscribers!
@soldierbk2268
19 күн бұрын
Try lead valves, could be fun (on cold engine it might work for few minutes)
@jwalster9412
29 күн бұрын
This takes bent valves to a whole nother level.
@loganleborgne420
29 күн бұрын
Carbon fibre home made rims...a crazy restomod on a Lada with a carbon fibre widebody AWD lots of hp make this old car desirable safe and fast! Thanks for the videos it's always entertaining and interesting!
@ItsDaJax
29 күн бұрын
They made, well modified some steel wheels once, that looked pretty cool. I think I scrolled past a video yesterday of them making carbon body parts. A Lada is already light, and apparently the engine can be built for about 3/400 hp. I already wouldn't mind one to trick out, but a carbon Lada with a built sr20, 22r, ford or volvo 2.3, k20, carbon 15s, sounds like a fun time.
@alexmarjanovic98
26 күн бұрын
Make an upside down Lada engine. Like the Italian motorcycle. Put the oil pickup in the valve cover. I’d really love to see that. 😊
@kennethcohagen3539
29 күн бұрын
I didn’t expect the valves would have lasted that long!
@Leland387
15 күн бұрын
Nordic gold I've had it on a lathe many of times.
@dizzious
28 күн бұрын
How many alternators can you put on a car before it stalls out?
@outtadate
27 күн бұрын
Brass, colour of the bar is not right for gold! Amazing video as always 💪💪💪
@davidblalock9945
29 күн бұрын
If those valves last more than a second after installation, they’re not made from gold. The pressure of the valve springs would pull them apart. If anything they’re made from Nordic Gold, which is an alloy of copper(89%), aluminum(5%), Zinc(5%), and tin(1%).
@iXenox
29 күн бұрын
That must be fool's gold! (iron sulfide/FeS2)
@mrPauljacob
27 күн бұрын
Awesome. Imagine what the valves from them fancy camless engines cost
@georgieippolito9924
29 күн бұрын
Rock engine block will it work?
@mrmatt2525able
27 күн бұрын
Awesome video
@EmDzei
26 күн бұрын
The value of your car always doubles when you go to refuel, but now you put gold-plated valves, and the value of the car increases a thousandfold. Even Lada. =)
@linuxguy1199
29 күн бұрын
Anyone else associate fond memories from the soundtrack in Ramsey's "Family"?
@sebymesteru
29 күн бұрын
I'd say it's bronze,brass is way to soft for that kind of stuff. Nice touch with the "gold" valves on that old engine. Old but gold😎
@vanpenguin22
29 күн бұрын
Now, Existing brass valve guides, is what sticks in my mind. Like, as in, designed to work against hardened steel, not a softer material. Thing is, What other material should they be? Ceramic?
@ThePwak007
28 күн бұрын
This wouldve been good for April fools day!
@michaelharrison1093
29 күн бұрын
I am guessing that the alloy is a silicon bronze or possibly "Nibral' - Nickle, bronze, aluminium. Both of these bronze alloys are extremely strong metals.
@joejoejoejoejoejoe4391
29 күн бұрын
If you want a clean chip tray on a lathe, get someone to turn some gold.
@davidotto7666
Күн бұрын
Vows are either out of made out of white metal or lead or some kind of metal like that it might be white metal
@vintagemotor7451
19 күн бұрын
Melted Gold
@erkinalp
26 күн бұрын
video idea: recreate the pentagonal rotary engine, making the necessary modifications to run it on gasoline, and apply it to a semi truck and test the performance.
@gapho5198
29 күн бұрын
Nordic gold!
@GunMetalEngineer
25 күн бұрын
Maybe you could work harden some brass and do it again with brass??
@GurpreetSingh-qu6tc
28 күн бұрын
U should try golden rims for tyre s
@shailendradeopa2089
29 күн бұрын
Definitely brass. During melting we saw slag and gold does not have slag.
@maximotest2226
28 күн бұрын
The gas seal should be great but the soft valve stems might be a issue.
@maxima32500
28 күн бұрын
Brass, copper, zinc and tin alloy...
@danielparsons3995
29 күн бұрын
Id say its either bronze or brass as bronze is a tin and brass alloy but more expensive than regular brass
@stevensmith490
29 күн бұрын
didnt even need to see past the casting to know thats a brass bar
Пікірлер: 635