Any updates? It feels like a lifetime since the last video. Are you at Snetterton this weekend?
@simongoodwin4360
2 ай бұрын
What was the problem in the end Nick ?
@alexgray6750
3 ай бұрын
Main shaft bearings 100% in the grarbox
@forresteti
3 ай бұрын
Is the crank pulley moving when you press the clutch. If it is it could be crank thrust washers.
@danielbrydon3869
3 ай бұрын
I’d imagine it’s the input shaft where you’d normally shim it, under the cap. Could the dog box be putting excess pressure on that bearing? I believe there’s a limit on how much preload you can add with the shims, 3 shims IIRC so it’ll probably need that bearing replaced if the gap is too much
@blunkybill
3 ай бұрын
Sounds like the clutch release bearing to me. Is this after the drive yesterday??
@miked6310
3 ай бұрын
Hope you get it sorted in time for Brands, i'll be down there for the weekend so was looking forward to seeing you out on track, good luck mate👍
@dave8728
3 ай бұрын
Come on you can do this. I live in Hampshire if you need anything getting off work Tuesday Wednesday. Wishing you all the best Nick.
@jamesc_s3
3 ай бұрын
Fingers crossed Nick you can get this sorted
@nordicbeast
3 ай бұрын
Throwout bearing is usually opposite. Push the clutch in, and it gets louder. Gotta be inside the box. Maybe contact mike hood. He does tons of transmissions for the b5 platform. Scott @ advanced automotion as well. Is a huge transmission guru for audi/vw
@johngevo8
3 ай бұрын
prorace engineering in Essex rebuilt my SQS 02M
@shiftinggears9896
3 ай бұрын
It's bearing or possibly play in your flywheel?
@JammoJay
3 ай бұрын
Try Transgear in Southampton nick. I know people that have used him before and said he has done a good job. Fairly common box so may be able to sort you out if you take the box in. Its worth a shout
@ratspeedgarage
3 ай бұрын
Sounds like the brearings on the power steering pump on my 06 sprinter.
@Wezza123
3 ай бұрын
Hope you get it sorted
@forresteti
3 ай бұрын
It does sound like a thrust bearing.
@peterturbo9627
3 ай бұрын
Ditto....Foxberry garages(aka Helical Gearboxes in Brockley)!!
@johnn1474
3 ай бұрын
what about AMD tuning or Darkside?
@ParsonsMotorsport-28
3 ай бұрын
input shaft bearing by the sounds of it
@gpg2694
3 ай бұрын
If I could help I would but mechanical engineering isn’t anything I know about ☹️. Fingers crossed you find a lifeline!!
@knoxyish
3 ай бұрын
sounds like a bearing cant help any more than that nick drop box an hope its fixable before brands .
@YOO23836
3 ай бұрын
Flywheel gone
@freddielovell5445
3 ай бұрын
Try Gary prebble
@jamesjmr5236
3 ай бұрын
Try Ben Corten miller
@ratspeedgarage
3 ай бұрын
Helical Gearboxes & Foxberry Garage LTD
@ratspeedgarage
3 ай бұрын
They did the gearbox and gripper diff for my rallycross mg zr with a 1.8t bam. 😊
Пікірлер: 28