This is one of the best farm channels on YT. Certainly one of my favorites.
@FarmingFixingFabricating
3 жыл бұрын
Thanks Bud
@mitsnevets
3 жыл бұрын
i agree !
@beowolfgang
3 жыл бұрын
Mine too! Great work @Andy, great Farm and Family!
@johnhatt1219
3 жыл бұрын
The brst channel out there
@jimsteele7108
3 жыл бұрын
So one of my favorite memories of my dad and I, were times like this. We'd roll through the implement dealer looking at equipment and dreaming. He's been gone just over a year now at 85 years. When I want to go to my happy place, this is where I go.
@stevewoodworth4263
3 жыл бұрын
Was beginning to wonder if something had happened to you. Anxious for a video glad to see your back. Keep them coming. Thanks Andy.
@FarmingFixingFabricating
3 жыл бұрын
Haven’t been able to stay awake at night to edit videos lately
@bearasojrnr
3 жыл бұрын
@@FarmingFixingFabricating Gee, We're all wondering why... Ya know ya can't burn that candle at both ends to stay warm in the middle. It surely doesn't work for long. Take care of yerself Andy... 👍🙂. Ward sold my then father-in-law I think it was a used gas 3020. Lloyd ran the parts... Hoskins used to be Case, just west of Half Acre, below a ice cream stand. When I was there in the 90s, one of'em still used to come to town on a big ole chained up Case with a 10' snowplow on it.
@mikeznel6048
3 жыл бұрын
Man your kids are great. You guys sure raised em right!!! Bless you, your family and farm Andy.
@danguritz2446
2 жыл бұрын
I watch this channel more than anything on SM and cable TV
@FarmingFixingFabricating
2 жыл бұрын
Good to hear that
@froggleggers1805
3 жыл бұрын
You really have alot of good employees, gotta be proud of them for sure.
@andrewterry8092
3 жыл бұрын
Sitting here at 4:30 am watching you guys change tires with no sound... I love it! Thanks, Andy!
@bustertim5333
3 жыл бұрын
Andy that a hell of a job to change them tires around WOW great video thank you for showing us all that you do . Your kids are great kids
@workonitm8
2 жыл бұрын
You got a lot done today. Thanks, Hi Sarah !
@Erated78
3 жыл бұрын
Great to be taken along on those jobs with you Andy. Interesting to see and hear how the weights and hubs work. Thanks and cheers
@kkduncanson
3 жыл бұрын
@ 44:09 Sara is extremely excited about being on camera! 🤣🤣 Keep up the great work! Good luck this spring, be safe!
@ejharrop1416
3 жыл бұрын
Thank you for another interesting video and I really appreciate the time and detail you put in to give us the content. Good luck with spring planting and I hope that the weather cooperates for you too. Cheers!
@andrewstich7117
3 жыл бұрын
Very good video thanks for all your hard work to do the video
@terryhobdy5727
3 жыл бұрын
Good video 👍 I always look forward to watching
@danl9334
3 жыл бұрын
awesome video keep them coming!!!
@emilhuggarn3050
3 жыл бұрын
Thanks for the video have a nice day at the farm
@jonbruce536
2 жыл бұрын
This is my favorite farm channel. I dairy farmed most of my life and this keeps it current for me. Thanks Andy. If you don't want to farm anymore, I'm sure you would have a career in Hollywood.
@jasongall6132
3 жыл бұрын
Great video Andy thank you. Tim’s the man!!!
@kopenhagenkid
3 жыл бұрын
Great video Andy
@m.j.l.abulle9107
3 жыл бұрын
Machinery dealer drive thru's are always interesting ! Some serious silage mowing capacity coming up for this season . Good to see the snow mostly gone .
@jimpolk
3 жыл бұрын
Andy. Loved the longer video. Lots happening on the farm.
@danfinley3690
3 жыл бұрын
Always enjoy your channel Andy
@mikebonge7206
3 жыл бұрын
Good employees. Nice new mower
@tomgluth4254
2 жыл бұрын
Continues to amaze me ! Your shop turns out a tremendous amount of work. And I do like how you keep on top of the costs associated with the parts and repair jobs on the various pieces of equipment. It must still make you take a deep breath(okay, maybe stop breathing,lol) when you get the bills in at the end of the month. Your farm is a fascinating operation that makes for great videos ! Okay, that was your feel-good moment. Get back to work ! Lol
@kopenhagenkid
3 жыл бұрын
Great job driving the tractor Sarah
@jasonziegler8253
3 жыл бұрын
Thanks for the great video Andy! was beginning to worry! haha
@andyanderson9165
3 жыл бұрын
Great video! Awesome content! Have a great day😀
@geraldfrench3287
3 жыл бұрын
G'day Andy. Farming Fixing and Fabricating. Just love it. You have a very interesting working life. Never a dull moment. Thanks see you on the next one.
@clydeschwartz2167
3 жыл бұрын
Excellent video it's nice to see the one store dealership still going selling John Deere equipment I my area here we RDO equipment that has a huge amount of dealerships in Minnesota and the upper Midwest and Midwest machinery that has around 20 stores it's tough to get good customer service when the dealership get so big
@arthurferreira2937
3 жыл бұрын
Andy It’s amazing all the work you always have going on Never a dull moment Good luck on the pottinger mower The new used planting tractor and the manure spreader
@normanzywicki2496
3 жыл бұрын
Hey Andy do you know why CaseIH are red?.... They're mad they're not a John Deere! Thank you farmers for feeding the world!
@keithcrowell7533
3 жыл бұрын
Actually deere is green with envy.
@gumbymeyer946
3 жыл бұрын
LoL 😆 My uncle was "green", we were "red". Dad would always chide Pete, the reason JDs are yellow and green vs all yellow ..... They're picked from the lemon tree before they're ripe. Personally, my fave was/is 5020.
@buffranchAB
3 жыл бұрын
Excellent operation there Andrew always up to something, if you ain't breaking crap - you ain't doing nothin
@tectalabyss
3 жыл бұрын
Hi Andy. Busy busy. Lost a friend last Wednesday. You riding through ,looking at the Tractor's reminded me of all the times we did that. He was a good heart-ed fellow . Has always I Liked,shared. God Bless and all my very best.
@donniehodge2548
3 жыл бұрын
It is what it is another good video Andy 👍
@CLEARVIEW666
3 жыл бұрын
Andy you're gonna have to give Sarah a raise. She ain't talking in the vlogs until she can see more green. Lol I always enjoy these dealership tours and resellers and auctions.
@patrickerger1483
3 жыл бұрын
Great video. Thanks
@mitchellmusser2670
3 жыл бұрын
Nuhn makes a good tank. I like there new ones thing empty crazy fast
@dangeissinger4906
3 жыл бұрын
That air filter housing on the J.D. truck looks great.
@raycollington4310
3 жыл бұрын
Andy, you're the funniest guy on KZitem. Would be priceless to see a video of you in the corporate boardroom. One of the best channels on KZitem by far. Cheers!
@Northeastohio
3 жыл бұрын
Love your videos
@johnpratt9429
3 жыл бұрын
Got some good guys there! Lot of work on utility box
@cadenmoyer6425
3 жыл бұрын
Every time I watch your videos I realize how much I miss dairy farming
@errolward9547
3 жыл бұрын
If you ever decide to make a hoodie or shirt with the phrase it is what it is id buy a few lately its seems to be my most used phrase
@buffranchAB
3 жыл бұрын
the gayest untrue phrase of it's time
@benjaminbauer4883
3 жыл бұрын
Merch link is in the description
@mikeznel6048
3 жыл бұрын
@@buffranchAB OFFENDED!!!
@wysurvivor
3 жыл бұрын
Hi Andy from Northern Wyoming. Its snowing here, your videos are a welcome break.
@andrewwoodhead8305
3 жыл бұрын
Highway to heaven!!👌
@chrisfarmsllc1224
3 жыл бұрын
My best paint gun was a sharp HVLP from NAPA and it was cheap. I am surprised they allowed them to stay dealers. The oldest supposed dealer was in Walpole NH, RN Johnson was forces to close because they were one store. When they closed they still had some new old stock for early Deere tractors and equipment in the inventory. I now have to deal with united ag that absorbed Stanton in CT and Hudson River Tractor in NY.
@mikebonge7206
2 жыл бұрын
Thanks. Great video
@teddydunford2920
3 жыл бұрын
I saw a JD sitting behind a old grain tower is broke ? This is another great video sir we always get to learn more about keeping equipment working .
@FarmingFixingFabricating
3 жыл бұрын
No
@sharonromer6606
3 жыл бұрын
Good to see Sarah again.
@charleslynch7274
3 жыл бұрын
I've been slacking with watching your videos I've been to busy feels great to be watching and catching up with ur videos again
@JohnDoe-jq5wy
3 жыл бұрын
Great stuff...machinery dealers seen fairly competitive on inventory. Red or Green means a substantial investment and the technologies bring greater production per hour.
@thomashanke6750
3 жыл бұрын
Ever think of rhino lining the inside of the compartments or a similar product? Had a rescue truck at the fire department done with it and it prevented the compartment from getting dinged up. After all you can put a firefighter in a rubber room with two bowling balls and come back 30 minutes later, one is broken and the other missing!! Looking forward at seeing everything finished.
@FarmingFixingFabricating
3 жыл бұрын
Yes
@stanleyjones4180
3 жыл бұрын
enjoyed the video thanks andy
@markreetz1001
3 жыл бұрын
I want you to know Andy that if you would have gotten me covered with manure by standing too close to spreader, I would have been pretty ticked! lol! Great video Andy.
@damonens9478
3 жыл бұрын
Worked for a couple of guys up till August, owned a feedlot and a grain farm, nothing was out of place everything was green and shiny, except for the claas combines haha, but it was a very tight run operation and honestly loved it there. But I'm just doing straight grain now at a different location
@peteschiavoni
3 жыл бұрын
Lots going on. That manure spreader was becoming a headache for sure!!
@michaelcarlson1528
3 жыл бұрын
Must be turning a bit too sharp. We have a large water tank that we use to haul out the waste water from the parlor and if we turn too sharp with the water tanker completely full, will snap the spindle in half. What we did to keep from this happing again was to fill the tank 1/2 to 3/4 full and problem solved. Just a thought. I remember your spindle breaking not too long ago. You might want to step back and watch the guys when your spreader is full and check the turning radius. It’s very common that they break when over loaded. Thank you for sharing, sir!
@klousy58
3 жыл бұрын
Very interesting video thanks for sharing
@kentpowell5427
3 жыл бұрын
another great video
@terrycapstick994
3 жыл бұрын
Good video. It was just missing the rock music with the time lapse wheel change and a fleeting visit from the everyday grumpy Jerad 😀
@tomrichter244
3 жыл бұрын
I missed the reason for all that wheel rearranging. Lot of work, so the reason must have been big. Thanks for sharing your work with us.
@colinkennedy8730
3 жыл бұрын
To match the corn planter rows
@mikeclifton8815
3 жыл бұрын
Glad to hear you went to a Nuhn tank.
@j.cliffordmurphy6460
3 жыл бұрын
when you have a dead end shaft, there is often enough room to drill and tap for a grease zerk, Pump grease in and push the shaft out. Leave the zerk in there or remove and thread a plug in. Just a thought.
@PAYNEKILLER..
3 жыл бұрын
"Looks like the top of your head" haha Nate finally got one back on the ol man, only 337,241 more to go Nate! Haha
@michaelowen1750
3 жыл бұрын
This yard looks very familiar-- I think the NY Farm Girls drove through this lot... Not many of those TR70s sitting with manure spreaders!
@farmingfishingfamilyontari2814
3 жыл бұрын
I’ll have to wait to see if you’re getting a Nuhn Quad Train. Nuhn is only 1/2 an hour from us. It’s quite the place.
@billbye2427
2 жыл бұрын
That was the trouble with the poop wagon - "it could not keep its axles clean" sticky poop , binding dingleberries = busted axle!
@YouTube_Professor
3 жыл бұрын
I’d love to hear your explanation of the workings of the different types of transmissions in the bigger tractors, that one that your changing the wheel spacing had some good acceleration.
@FarmingFixingFabricating
3 жыл бұрын
Yes it did
@danny_t1536
3 жыл бұрын
Watching while I cook dinner
@BirconuGaming
3 жыл бұрын
Nice video 😃
@tonycurtiss1081
3 жыл бұрын
Was hilarious to see you make those boys blush.... lol ! There still trying to figure out what to do with the first inch 😂 Don’t tell them about the 😜Andy they will run away 😭ing and 😲ing..... 👍
@johncheatham897
3 жыл бұрын
Keep an eye out for a good 4x4 Sara.
@mesh1248
3 жыл бұрын
Good choice on the nuhn tanker iwas wonderin how long you’d stick with the James way simplicity is key for longevity
@ginggur17
3 жыл бұрын
That sure likes to snap those spindles, wow. 😨👍🇬🇧🇺🇸
@scdc91
3 жыл бұрын
By the looks of those bins you need the Gypsies to come by and paint them. They make the rounds around here every few years wanting to paint bins.
@FarmingFixingFabricating
3 жыл бұрын
Yes
@akfarmboy49
3 жыл бұрын
interesting to see the dealers of machines.
@danwortmann7064
3 жыл бұрын
Hey Andy ! Paint the inside of the tool boxes a lighter color to help with light! Cheers to you and your BAD A$$ crew!!! Damn hungry cows!!LOL
@Aaron_S
3 жыл бұрын
Every time I open KZitem I think. 🤞Please there be a new FFF video 🤞thanks!!!
@pistolcek
3 жыл бұрын
Thrue 👍❤️
@theoroseboom-ranch-rimbey6636
3 жыл бұрын
Me too
@404nitro
3 жыл бұрын
JD's weights are listed as 165 for the small starters, 450 and 1400 in their brochures.
@scottmcfarland1177
3 жыл бұрын
I am surprised That John Deere let's them stay as a single dealership I know a lot of dealerships closed because Deere wanted them to open more locations! And your right the wrench for the inside dual bolts should come with the tractor for the price you pay!
@Misirkurutmamakineleri
3 жыл бұрын
very nice congratulations, I follow you,.
@Adam_Poirier
3 жыл бұрын
What’s goin on man, I hope your week is goin good. I was wondering how you guys are making out with the shop work before spring. Been kinda shitty here this week so far with problems breakdowns and what not. That tanker really likes to break spindles huh? Take it easy man thanks for a great video they really make my day
@FarmingFixingFabricating
3 жыл бұрын
Going great
@danvonbehren4852
3 жыл бұрын
I did the math Andy If I remember my Pipeliner's Math class from my short time at Iowa State, Mass value by 2.205 == 451.9 lbs. I was asked to leave due to college hijinks, Think Animal house .lol Great video once again my friend.
@jeffreyswanson2207
3 жыл бұрын
It is what it is
@mikeschuyler3771
3 жыл бұрын
Can't wait to see the ol 4020 finished If I rember correctly nobody wanted to drive it until the cab was off then everyone wanted to drive it!! I guess to work on there tanning lol
@FarmingFixingFabricating
3 жыл бұрын
You got that right
@toadtodd3758
3 жыл бұрын
Your right you just done that tire on the spreader 6 months ago
@stephensteen9058
3 жыл бұрын
Still just love that Sarah
@craigmiller5372
3 жыл бұрын
I like all they all just blow by you on the highway with the double line.
@jimmybuckler2638
3 жыл бұрын
👍👍
@knowltek
3 жыл бұрын
Be mow n like them fancy Euro tractor s..there bub... haha.. cheers
@davidwhittredge9923
3 жыл бұрын
Jason needs to be wearing a Hourigan sweatshirt!!
@dlmarquart
3 жыл бұрын
4020 is starting to look like new and alot of money in the dealership lots
@brianbarclay4316
3 жыл бұрын
It’s been a long time since I’ve seen O’Hara’s, I used to pick milk up there once in a while.
@hfff1
3 жыл бұрын
Inch wise it is always good to have more than less.
@braderwin937
3 жыл бұрын
Sitting here watching you makes me dream of bigger equipment that I can't afford My mom says All I do is dream about it cause I can't afford it
@chuckguyitt4017
Жыл бұрын
That’s why mounted pickers were invented, to keep the rear wheels moving in and out. Guaranteed never to seize-up.
@51ubetcha
3 жыл бұрын
With all the painting and body work your guys do, you should have a separate building just for that. When not used for painting, use it as a wash and pressure wash bay.
@jaredhiggins7931
3 жыл бұрын
Andy... ive been watching your content since you started youtubing.... my week is not complete until i watch your latest... I HAVE ONE QUESTION FOR YOU...How do you stay organized? between fixing what breaks, daily chores, and crop scheduling/harvest... could you do a video on how you juggle your crazy schedule?
@FarmingFixingFabricating
3 жыл бұрын
I just run with it
@DLKHAY
3 жыл бұрын
probably buy that back up wrench from any industrial supply company. could be called a piper wrench. I believe that is what we call them as a boilermaker
@stephenlandsteiner886
3 жыл бұрын
That made me Andy. Half the work is getting it in the hole
@mrdfarms9373
3 жыл бұрын
A lot going on in the shop, but the real question is “who ran over the $145 NAPA Creeper”. Thanks for the ride along Andy 🍺🍺
@FarmingFixingFabricating
3 жыл бұрын
Timmy
@mrdfarms9373
3 жыл бұрын
@@FarmingFixingFabricating 🤦♂️ walk arounds before moving equipment. We had to implement an SOP at the Firehouse after a driver ran over a creeper 😐. 💩 happens, nobody is hurt, roll onto the next item.
Пікірлер: 290