I am so happy I found your channel. My cousin gave me her floor loom, but I had never done any weaving. To learn the process I purchased a fifteen inch Cricket loom and have been learning the basics. One thing no one could tell me was what I could make. It was usually scarves and table runners for the small loom and rugs or blankets on the floor loom that I feel so inept to even try. Your videos have shown me that even small looms can be used to make useable items. I am so grateful to you for providing that insight.😊
@getweaving8459
Жыл бұрын
That's so exciting! I have floor looms too, I love them but I use my rigid heddle looms far more often. My next video is about making a garment even if your fabric is too narrow for your project, you might find some useful tips. Happy weaving!
@marycunningham6074
11 ай бұрын
You were recommended to me by a friend who has just taught me how to weave. I found a small plastic loom at a charity day, and took it home to play with. I worked it out, then the light bulb moment hit, and I thought Oooooo I could do this on a larger loom. So I purchased an Ashford 16" Sampleit Loom. My first project was a table runner, and I was very happy with it. Then because it was so awkward to carry to craft meetings I purchased a 20" Ashford Knitters Loom. I got a bit cocky, and tried to warp the knitters loom on my own. Big mistake. I have tried twice to get it right. The first time the yarn was too thick for the heddle, then the next time I put the cardboard strips on the wrong end. I have tried to save it, but not sure if it can be saved. I am a bit flustered by your reference to all that math. I just decided to use one yarn cake for the warp, and the same yarn in a different colour for the weft. Enjoying your video's though.
@getweaving8459
11 ай бұрын
It sounds as if you're at the start of a very exciting journey, don't worry about the things that haven't worked this time, you won't make the same mistakes again, we've all done it! You can rescue a warp, you can pull it all through the heddle onto the other roller then take it back, with the paper or card strips on the back roller. I had to practice warping on my own loads before I was happy with it, having a friend to start can really help though. Wishing you lots of happy days weaving, Sarah ☀️
@katharinakreativ5127
Жыл бұрын
Thank you so much for sharing, Sarah! Very smart direct warping method ❤
@sandymorrison1400
Жыл бұрын
I have 12" floor tiles, a dining table, dining chairs with knobby tops to use as my peg and measure accordingly. I don't like to complicate my life. Measuring is so easy for me.
@jcaswell2171
3 ай бұрын
Yes! Then the chair can move closer as the warp is wound. Thanks.
@DeedersW
4 ай бұрын
Your projects have encouraged me to make a couple garments for myself. Thank you!
@getweaving8459
4 ай бұрын
That's good to hear, keep it going!
@jackieperriment1153
Жыл бұрын
Thank you Sarah for all of your tips. This was such a good method to get the warp onto the Loom single handed.
@getweaving8459
Жыл бұрын
My aim has always been to teach people how to work independently, and that includes not needing me! I aim to teach in one lesson, at least enough to get started.
@gregfout5857
5 ай бұрын
Sarah, thanks so much for sharing so many good tips!!
@getweaving8459
5 ай бұрын
Happy to help ☺️
@StarKnits
8 күн бұрын
I love your videos and I'm always rewatching! I have a 4 shaft floor loom and I'd love to see how you warp your floor loom!
@getweaving8459
7 күн бұрын
@StarKnits I have something on already so it won't be for a while yet. I keep the same threading, cut off at the front of the reed, tie a new warp on and wind onto the back roller through the reed and the heddles. Saves a lot of time!
@loominous47
Жыл бұрын
Thank you! Nice, clear description of the RH "hybrid" warping procedure (using a warping board instead of a warping stick). The creeping loom trick is an excellent tip! As an extra precaution (I have a kitty and once had four), when I thread the holes, I tie each bout of threads (about an inch each) into an overhand loop (not a knot). The secured bouts of threads cannot slip back through the heddle. This also allows me to pull the freshly secured bout of threads taut while lifting and lowering the heddle to check that the threads in the bout creates a clean shed. Doing this for each bout as it is completed is a good way to check for threading errors as you go. Thank you, Sarah, for yet another excellent video.
@getweaving8459
Жыл бұрын
Great tip! Thank you 😊
@lauramartens5516
5 ай бұрын
Thank you so much, your pointers were a huge help and I learned much from them.
@getweaving8459
5 ай бұрын
That's good to hear, thanks 😊
@kathycostello4104
Жыл бұрын
I am so excited to have found your channel! Please keep posting videos, as you can. As a spinner and sewist myself, I am excited to have support in going beyond scarves in my step into weaving. I have a 32 inch Ashford rigid heddle loom and hope to get it warped again next week. I also want to get a smaller, probably 16 inch, RH to have a more portable, lap size. It also would be easier to find space to warp. I am envious of your looooong table! Thank you again, Kathy from Western USA
@getweaving8459
Жыл бұрын
How lovely, you sound as excited as me! I'm trying to put out all the things I've learned, mistakes and all. Happy weaving 😊
@maria.b.this.old.cottage
Жыл бұрын
Thank you so much Sarah :) It looks so simple to warp this way! Have a great day Sarah! :)
@anniredale7207
Жыл бұрын
Great clear video. Really loved your tip about leaving your warp attached to the warping board whilst winding warp on back roller. Brilliant idea. Will also try that when using my 8 shaft too
@getweaving8459
Жыл бұрын
Glad to hear that you found it helpful, thanks for the message 👍
@babyimhooked
10 ай бұрын
Such an amazing idea!! I'm an newer weaver and I've been struggling to keep everything in place while I wind on the back beam. I can't wait to try this, thank you so much for sharing!
@getweaving8459
10 ай бұрын
Glad I could help!
@Ravencall
Ай бұрын
I had no idea that a rigid heddle loom could handle such a long warp!
@getweaving8459
Ай бұрын
I've put about 350in on in the past, but it was quite a fine fabric
@cerwelt
7 ай бұрын
I learn something new every time I watch your videos and my first loom hasn’t even arrived here yet. I feel like I’ll be a little less apprehensive starting my first weave because I’ve watched your videos. Thanks
@getweaving8459
7 ай бұрын
Thank you, that's good to hear. My next one is Back to Basics, should be out this week. I'll be thinking of a complete beginner, like yourself perhaps.
@carpenc1
9 ай бұрын
Your use of the warping board makes so much sense. Thank you!
@getweaving8459
9 ай бұрын
Glad you like it, it helps me a lot!
@Palouseweaver
Жыл бұрын
Thanks for sharing the information on the yarn that you’re using. I’ve been inspired by your videos to finally cut my handwoven cloth and make myself a tunic. It turned out quite well and I’ve cut my next shirt out already, I was sewing the seams this afternoon. I have a tall stack of handwoven cloth that I’ve made over the years, but I just couldn’t bring myself to use them. Now I am 😊 Thanks for the inspiration!
@getweaving8459
Жыл бұрын
Oh that's brilliant 👏, thank you so much for letting me know. Funny isn't it- once you get started it's not as scary as you thought!
@alicesulzer1412
Жыл бұрын
Thank you for the warping tip, definitely going to try that !!
@annabergemann6876
Жыл бұрын
I love your yarn ❤
@deejcarter2003
Жыл бұрын
Thank you for the tips. I just took cloth off my loom and I’m really to warp it up again 🥰
@SoulfulSpinning
Жыл бұрын
Thank you so much for all your helpful tips! So very appreciated. 💕
@bugabooinsectfeeders3059
4 ай бұрын
Thank you! ❤
@getweaving8459
4 ай бұрын
You're welcome 😊
@corrinneloudon525
10 ай бұрын
Hi Sarah, thank you for this video. I've just shown it to my husband, in hopes that he'll be able to make me a peg frame like yours. I was taught to tie a overhand knot in the warps and the thread yarn through each bunch and use that to tie then onto the front stick. You can imagine what a mess I get into with tension, every time 🙄. How are you tying your single knots, please?
@getweaving8459
10 ай бұрын
I take a small bunch- no more than an inch wide- take them over the front stick, underneath and split the bunch in half, up around the sides of the bunch then half a reef knot. Tie all the warp in a single knot then go back and re- tension equally on each side, tying the 2nd half of a reef knot, finishing on the edges.
@getweaving8459
10 ай бұрын
I know a lot of people who use that method, it's called leashing. I prefer the way I do it!
@getweaving8459
10 ай бұрын
I'm hoping if you watch the video Quick Threading again you can see how I tie the knots, pause the photos.
@beth1979
10 ай бұрын
The hand spun wool is so beautiful.
@getweaving8459
10 ай бұрын
Thank you...I'm almost looking forward to cooler weather so I can wear it 😀 😎
@stamperitis
Жыл бұрын
I need to try that. I always have a hard time when uneven tension
@CarolBrobst
Жыл бұрын
I set my loom on my wrought iron deck table and when I wind on, hold the loom and scoot the table across the deck towards the railing where I've clamped my warping pegs. I also direct warp outside on nice days, even when I already have other projects going. I think, "Oh it's a great day for warping." I rarely have a "naked" loom in the house :D
@getweaving8459
Жыл бұрын
A "naked" loom is so sad! I try to put a new warp on as soon as the old one comes off, phew 😊
@beverleylawton6899
Жыл бұрын
Thank you for this video, Sarah. It’s always great to have warping tips! I’m curious to know…do you just do the double knot into the apron bar? I somehow picked up that I had to tie a bow too🤷🏼♀️ but I’m guessing that’s not necessary? I love the colours of the warp…I look forward to seeing the skirt!
@getweaving8459
Жыл бұрын
I just do a double knot but I guess you could do a bow, except that would take quite a lot more warp. It's possible that the bow might lie a bit flatter too; to combat a bump from my knots I also wind a sheet of paper at the start of my weaving.
@fsparkman3343
Жыл бұрын
I also have a 20" ashford knitters loom so am excited that you make your clothes from cloth woven on this loom. I have been weaving for a couple of years but mostly make scarves although recently I have graduated to using 2 heddles to weave different patterns I would love to have a go at making a jacket. Where do I buy your patterns and what size do they go up to? I am also a spinner and love the softness of hand spun yarn. I have spun about a kilo of fleece to knit a jacket. I'm now thinking maybe I should weave it up and make something instead. Do you use commercial yarn for warp with handspun?
@getweaving8459
Жыл бұрын
You can find my patterns here www.etsy.com/uk/shop/GetWeaving I mainly use a commercial warp with a handspun weft, for speed as much as anything, but sometimes I spin the warp too. I'm on Instagram and Facebook as getweavingwithsarah
@pdpierce44
Жыл бұрын
can you put your etsy link in the description of the videos? I love those trousers!
@getweaving8459
Жыл бұрын
It's on the last shot of the video- www.etsy.com/uk/shop/GetWeaving. The pattern is TR001. 👍
@getweaving8459
Жыл бұрын
I'll put it in the description too next time, thanks for the suggestion 👍
@pdpierce44
Жыл бұрын
@@getweaving8459 thank you so much! im so enjoying your channel!!
@sandymorrison1400
Жыл бұрын
I've wove since 1991. I have not used a warping board since 1993.
@getweaving8459
Жыл бұрын
I like the extra length it gives me if I'm warping up indoors, and it keeps my long warps under manageable tension.
Пікірлер: 59