Hi Vas, I noticed you're using a loop bungee retainer/hardware. Does it come with the Razor 2.5 system? Do you prefer loop vs continuous bungee? Thanks
@DiverbyDesign
3 жыл бұрын
Hi, The actual retainers are "normal" triglides with small loops of cord. I prefer triglides with a lowered middle bar so the webbing runs through very smoothly and sits down very flat. You can see videos of making these here. facebook.com/diverbydesign/videos/173412790405588/ kzitem.info/news/bejne/y5dnrKeBqptid2U For the story about "loop" vs "continuous" - it can get rather controversial. However, the Loop bungee provides a far better hold, particularly when the cylinders get heavier. The continuous bungee is simpler and has the advantage of being able to be cross clipped should you have removed one cylinder. Lastly, the loop bungee keeps the chest D rings cleaner and not pinned down - which I find more convenient also. I dived for years with the continuous with multiple stage cylinders and since making the switch to Loop Bungee, I will not go back to using a continuous :-) Hope you give them a try and do let me know how you find them. Cheers.
@strongestkarate
3 жыл бұрын
@@DiverbyDesignThanks for the reply Vas. I meant the hardware on the spine webbing, below the delta shoulder plate. Is it from SUMP UK or does ot come standard with the new Razor 2.5? On the continuous bungee, I haven’t tried one yet but looking at the videos it seems the loop has a better hold. Thanks
@DiverbyDesign
3 жыл бұрын
@@strongestkarate Ah, OK, so yes, the silver spine plate you see is from Sump UK and a great piece of hardware for me. However, you can use the included Razor hardware for attaching the loop bungees as well - if you look a few cm below the silver part, you will see a more square black part that comes with the Razor. This actually has a drilled hole on either side and with a modified way of making the loop, you can use it just fine. I don't actually use it because the bungee is then trapped very close to the webbing and makes a bigger bulge - not a problem if you place the part "upside down" and have the bulge away from your back. I had these plates since my 2.0 and so I just re-used it as I went to 2.1 and now 2.5 :-)
@strongestkarate
3 жыл бұрын
Thanks for the reply and clarification. I thought they come standard with the 2.5 Razor Version. Lol! Nice videos you have on the lockdown series. Very useful tips and tricks.
@divetimeliu
4 жыл бұрын
You can cut out the extra tape.
@DiverbyDesign
3 жыл бұрын
Hi, yes, if you mean the extra length of the webbing for the T weight part. I like to keep enough length to let me route it through a variety of weight blocks and the "extra" webbing gets folded over "on top" of the diver and does not press on the body or get in the way, so I just keep it for flexibility. How are you using yours?
Пікірлер: 7