For those confused from the epoxy block: The chain is directly attached to the two anchors on the block, then the extra chain is loosely chained to the metal bar as I assume this is a safety measure so if the epoxy fails/breaks the bar does not touch the showroom floor. The guys were standing on the bar but was transferred to the block as the bar is basically sitting on top.
@tulsapete
Жыл бұрын
It’s just a poor setup to prove their product’s capabilities. They simply need a bigger pieces of concrete.
@Therealphantomzero
Жыл бұрын
Was just about to say this. You can see the tension on the chain proving this. Now what we need to test is how brittle it is
@wsfwsf1497
Жыл бұрын
Those grey hooks should be painted yellow or flourescent green to show the rig off better.
@shaneshonda
Жыл бұрын
But doesn't them standing put the weight on the chain not the epoxy?
@robd.4319
Жыл бұрын
Stanley I watched the very first Stop you made like three times (Epoxy Primer). What a joke they were standing on the metal bar which in turn was hanging from the chain. Below the metal bar is where they had the the cement attached to the bar. Love the trade show videos. Really enjoy the videos with that real funny lady can't remember her name. You know she had those glow in the dark rocks that you put in cement that she threw all over the floor haha.
@ZeoCyberG
Жыл бұрын
No, the chain was directly connected to the concrete block, only the secondary safety drop chain was connected to the bar that is only there to stop the block from crashing through the floor if the bond breaks. The bar was sitting on the concrete block to transfer the load and that was how they were testing the strength of the bond.
@Derf1313
Жыл бұрын
Amazing what becoming available in the industry. Certainly appreciate all the time y'all put in to keep us informed, educated & chuckling ! Thanx !
@Dirtmonkey
Жыл бұрын
Pretty cool stuff! Appreciate the support too 🙌
@weeman_com
Жыл бұрын
I don't think that primer demo was well thought out. The primer bonded the hookup points to the concrete that weight was above the hookup points. The weight doesn't appear to be acting on the primer/hookups rather than above it on the trolley jack. Surely they should be adding the weight below the concrete to pull it down from the primer attached points 🤨
@ZeoCyberG
Жыл бұрын
Actually, it was just set up like a bearing puller. The bar was transferring any additional load directly to the concrete. There was just two separate chains, one directly to the concrete from the hoist that is holding everything up off the floor and the second chain that was there for safety in case the bond broke and would keep the whole thing from crashing through the floor. Note the second chain remained loose the whole time, meaning there was no load on it and the bar was sitting on both ends of the concrete block. So all their weight was added to the block.
@MrRebar15
Жыл бұрын
*Stanley "Dirt Monkey" Genadek* Very interesting, lots of cool stuff, thank-you sir for taking the time to bring us along. GOD Bless.
@Dirtmonkey
Жыл бұрын
Thank you sir for tagging along 👊 glad you liked it
@TheGanderNewfie
Жыл бұрын
The first one was a demonstration on how much weight the chain could hold? The only weight on the block is from the block itself.
@johnmartin7182
Жыл бұрын
Awesome content thanks for your time to do this video big fan of your channel and love it
@Dirtmonkey
Жыл бұрын
Appreciate it! Thanks man
@stanhensley3082
Жыл бұрын
Wow! This show was like a science show! Great new products to make cement work much easier!! Thanks 😊.
@Dirtmonkey
Жыл бұрын
Bill Nye edition 😂👍
@patrickmalley2280
Жыл бұрын
Tradeshow trickery!
@av1204
Жыл бұрын
concrete dissolver as teenager would have been bad
@Dirtmonkey
Жыл бұрын
so true😂
@CZAnthonyX
Жыл бұрын
First day of our mowing season was today! Pretty happy to be back on the wagon! I love these tradeshow videos! Keep up the great work!
@Dirtmonkey
Жыл бұрын
Wooohoo spring has sprung 👊🐛💚
@leonkaczor2405
Жыл бұрын
Great video!!! Thank you for the show video!!!😊
@Dirtmonkey
Жыл бұрын
Of course 👊
@probuilder961
Жыл бұрын
Thanks for taking the time to do this! 👍
@Dirtmonkey
Жыл бұрын
You are very welcome! Thanks for coming along for the ride 👌
@michaeldunn150
Жыл бұрын
I liked that tire sealant. pretty neat!
@Dirtmonkey
Жыл бұрын
Agreed 👌
@Jamesthechef0311
Жыл бұрын
Whoa ... This is cool I can already feel the cement boogies
@Dirtmonkey
Жыл бұрын
😂👌
@tonynewton7902
Жыл бұрын
Nice one Stan. 👍👍🏴🏴
@Dirtmonkey
Жыл бұрын
Thank you!
@Eddavids2
Жыл бұрын
We use concrete mender at my Frozen Warehouse, works great for smaller repairs with high traffic. The sand needs to be saturated. Pretty expensive but works good.
@Dirtmonkey
Жыл бұрын
Cool beans glad to hear it works good
@wsfwsf1497
Жыл бұрын
Wonder if the last item, the concrete disslover, would work as prep for an epoxy floor situation?
@angus4202
Жыл бұрын
im definitly interested in that multiseal im gonna have to try it ive got some old dry rotted lawn cart tires that have slow leaks but good tread i wanna get some use out of
@williamstewart9104
Жыл бұрын
The very first clip on this recording is A Falsity, if they wanted to show how strong the bond was they would have weight on the concrete and have stood on it also... The fact that they have not shows you how much they believe in their product.... All they are doing is showing the strength of steel... Your friend from Scotland UK...
@ZeoCyberG
Жыл бұрын
No, the test was valid as the only thing holding it all up was the primer bond. There was just one chain connected to the 2 bond points on the concrete that connected it to the hoist and the bar was sitting on the concrete block, transferring any additional loads to it, with just a second chain, which you can see was never under load and was slack, that was there just for safety to keep everything from crashing through the showroom floor in case the bond did fail.
@Dirtmonkey
Жыл бұрын
I have looked at that wondered if that was valid
@MattyM110
8 ай бұрын
It just seems like they are sitting on the bar and the block is below it, so no weight is added to the epoxy of the block
@Mikefirstfloors
Жыл бұрын
For that multi seal I just spent 365$ for a new Michelin LT265/60/20 cause I had a nail at the edge of tread which is unpatchable. 2 gas stations air compressors didn’t work and was going to Orlando so I turned back home, day & 1/2 to replace. Leery about the safety of that product, you just drive as normal and it fills continuously?
@wirenut003
Жыл бұрын
Great video
@mrsmiley631
Жыл бұрын
They all seemed like solid products. Show me more weird sh@t?
@Dirtmonkey
Жыл бұрын
Haha I’ll do my best 👍
@brianwilton8555
Жыл бұрын
great video
@Dirtmonkey
Жыл бұрын
Glad you liked it!
@andysukosd8177
Жыл бұрын
Cool video ! Thanks
@Dirtmonkey
Жыл бұрын
Glad you liked it!
@jasonj9111
Жыл бұрын
Thanks Stan. Good stuff
@theMekanik
Жыл бұрын
1.. Is that konkrete primer the same thing as Rhino Snot you spray it on moon dust, roks, gravel and kemikally welds it all together. 2. Does the koncrete krak mender ebb up making the konkrete non porous? 3. The Lift Assist is Kewl 🤘🏻 5. You kan use Multi Seal to Make a Solid Kore Tire….. Only Down Sidw is Rolling Mass is Inkreased, Tire Weighs like 200 LBS & you Have to Kut the Tire Off Works Great! 6. I am interested to see if the konkrete dissolver will work on Barnakles on the Bottoms of Boats. 🤔
@Israel_alive_forever
Жыл бұрын
Has the letter “C” banned you?
@bradencannestra99
Жыл бұрын
Great video Stan!!
@Dirtmonkey
Жыл бұрын
Happy to hear it 👍
@iexcav8534
Жыл бұрын
So I used that 10 min mender on my basement and garage floor. That stuff works. I will be using it again...
@Dirtmonkey
Жыл бұрын
Good to know!
@Cullens_Workshop
Жыл бұрын
i'm confused by all the guys standing on the bar. I thought the block(which none of them are standing on) was what had the primer, not the engine hoist.
@Powerweights
Жыл бұрын
I know I was looking at that too, it doesn’t look like the guys are standing on the concrete
@remodz6385
Жыл бұрын
They aren’t putting ANY more weight on the actual epoxy joint lol. They are literally just standing on the bar itself which is on top lol
@MrJohnweez
Жыл бұрын
The chain is directly attached to the two anchors on the block, then the extra chain is loosely chained to the metal bar as I assume this is a safety measure so if the epoxy fails/breaks the bar does not touch the showroom floor. The guys were standing on the bar but was transferred to the block as the bar is basically sitting on top.
@ianunderwood1163
Жыл бұрын
Love the videos
@Dirtmonkey
Жыл бұрын
Appreciate you!
@thehoff4581
Жыл бұрын
This was weird but cool? Thank Stan!
@Dirtmonkey
Жыл бұрын
Hahah you bet
@robertvannicolo4435
Жыл бұрын
Stan I was wondering des the lifter slide on a track or do you have to move it every few feet if that’s the case might be easier to lift block lifter looks heavy
@shepherdsfleetservicesllc8147
Жыл бұрын
Good video as always
@Dirtmonkey
Жыл бұрын
Appreciate that
@shepherdsfleetservicesllc8147
Жыл бұрын
@@Dirtmonkey your welcome. I have watched your channel for years just under different name
@justinsnyder6256
Жыл бұрын
Bunch of new chemical products
@dustinweber6803
Жыл бұрын
Nice
@Dirtmonkey
Жыл бұрын
You bet 👊
@RadDadisRad
Жыл бұрын
My friend is there for Leviat.
@Dirtmonkey
Жыл бұрын
That’s awesome 👍
@PAINFOOL13
Жыл бұрын
Weird crap is Cool 😎 😂👍🏻
@Dirtmonkey
Жыл бұрын
Can’t argue there 👌
@theMekanik
Жыл бұрын
🤘🏻😎🤘🏻
@Dirtmonkey
Жыл бұрын
Thank you sir!
@danielstewart7732
Жыл бұрын
on the first one with the concrete epoxy..... none of the weight was being put on the cement or the bond??? all the weight was on the chain, and bar, which was holing the cement block underneath it... or am I crazy?
@Dirtmonkey
Жыл бұрын
I think your right. I couldn't tell
@PeteyMcSavage
Жыл бұрын
My favorite Canadian
@joewagner1677
Жыл бұрын
God bless
@Eddavids2
Жыл бұрын
$4300 for a vacuum?
@ZeoCyberG
Жыл бұрын
That saves your lungs from concrete dust, which saves your life. Concrete and cement dust contains silica. If you don't know much about silica, in dust form, it's deadly. Silica dust is one of the biggest killers of construction workers, second to asbestos.
@Dirtmonkey
Жыл бұрын
Best one I have seen though
@nashcobb3056
Жыл бұрын
here to help
@Dirtmonkey
Жыл бұрын
👊👊👊
@grantmeyer6097
Жыл бұрын
Comment
@Dirtmonkey
Жыл бұрын
Reply 😉
@ascott6804
Жыл бұрын
Wait, wait, wait..... Why was the first demo a bunch of guy suspended above a concrete block? The cherry picker had one screw into it? Show me that!! Edit: so why all the extra chains hanging all over?
@remodz6385
Жыл бұрын
So you can’t see that it’s hooked to the bar itself as well lol duh…
@MrJohnweez
Жыл бұрын
The chain is directly attached to the two anchors on the block, then the extra chain is loosely chained to the metal bar as I assume this is a safety measure so if the epoxy fails/breaks the bar does not touch the showroom floor. The guys were standing on the bar but was transferred to the block as the bar is basically sitting on top.
@ZeoCyberG
Жыл бұрын
@@MrJohnweez Yup, just like a bearing puller setup.
@sikosis999
Жыл бұрын
i can barely watch these, some of the bullshit people peddle and at the prices they want . . . i don't know how you do it and all the walking on top of it . . . i'd be pissed by the time i'd left over having to decipher some hacks spin and bullshit.
@Dirtmonkey
Жыл бұрын
I leave the deciphering up to you guys and save you the steps lol.
Пікірлер: 98