You could just bolt both trans together then you know it would be flat. Sense you can’t get the bell housing off
@StationroadRatrods
3 жыл бұрын
Basically yeah that would have worked perfect if I could do it here, but I ended up bringing it to a shop near here to have it welded, and it would be rough having to bring like 6 feet of transmission to him 🤣
@christopherclaure6689
2 жыл бұрын
“Goes to the quantum realm never see it again” lol Midnight mechanic problems
@StationroadRatrods
2 жыл бұрын
Haha yes. Some things you don’t even look for, they’re gone. 🤣
@Nickelplate1
Жыл бұрын
Wasted like 13 minutes of my time waiting to see that this guy didn't do anything right. I'm trying to figure out how I can fix my own bell housing, not how some rando failed on his. I already knew not to try to MIG aluminum without a spool gun.
@StationroadRatrods
Жыл бұрын
I’m not sure if you read the title or not but “fail” usually means it didn’t go as planned After this experience I dropped it off at a shop and the guy charged me like 40$ to weld it up and did a very clean job so I guess that’s my advice to you also.
@Nickelplate1
Жыл бұрын
@@StationroadRatrods yeah I did read the title. I just thought you had done it the "right" way and it still failed for some reason. I'm having a pro weld mine because I don't trust myself to get it perfectly straight. Thanks and sorry for being grouchy before.
@StationroadRatrods
Жыл бұрын
It’s all a learning experience that’s for sure, and that’s why I brought it to someone else after having the trouble I had. After having the bell housing welded and going through the trouble of rebuilding it, the damn thing wouldn’t move with less than half throttle so I was feeling pretty grouchy too 🤪 No worries at all man, good luck with your build. If you haven’t already, look up the “sloppy transbrake” it’s amazing on the 80E
@destro513
5 ай бұрын
I just filled in a fist size hole on mine with an htp invertig 221. It was pure hell and I'm a very good weldor
@StationroadRatrods
5 ай бұрын
Oh man I bet that sucked
@DarbyDoo588
3 жыл бұрын
Also, what app do you use for thumbnails?
@StationroadRatrods
3 жыл бұрын
I use mematic, and when I do the text and stuff I leave some room on the bottom so when I save the picture, I can go and crop out the bottom where it says “made with mematic”
@timothyball6608
3 жыл бұрын
Have you ever used an impact screw driver with the torx bit to try and remove the bellhousing? Might work better.
@StationroadRatrods
3 жыл бұрын
That’s actually how I broke it hahaha, dumb bolts are awful to get out
@timothyball6608
3 жыл бұрын
@@StationroadRatrods it’s nice to live where rust isn’t a major problem.
@StationroadRatrods
3 жыл бұрын
For sure! That’s only a dream for me haha
@4shooters
2 жыл бұрын
lol my family is always sleeping
@StationroadRatrods
2 жыл бұрын
I only get to work when Cass and the girls sleep, so I don’t usually get to sleep too much 🤣
@toosavvy3504
3 жыл бұрын
Snotter? ...... You gotta! 🤫 tooSavvy @UK
@StationroadRatrods
3 жыл бұрын
Hahaha shhhh
@diduck6878
3 жыл бұрын
Torc + there a little thicker
@StationroadRatrods
3 жыл бұрын
Oh neat! Never heard of them, I’ll check it out
@terryrideout7457
3 жыл бұрын
Good video. Go try.
@StationroadRatrods
3 жыл бұрын
Thanks! It’s welded up now, hopefully it’ll be a good transmission.
Пікірлер: 26