30 years as heavy equipment tech seen my share of self and done a ton...You do great work. And you don't over talk .cheers
@woodartist2021
7 ай бұрын
Great project! Thanks Greg for sharing all your parameters: WFS, voltage, type og wire and gas used. Thesr little things are one of the main reasons I subscribed to your channel. I ejnoyed this structural welding video very much!
@dirtyjobs3995
7 ай бұрын
Always look forward to your videos, thank you for letting us know consumables and setting your using
@weldmachine
7 ай бұрын
Seeing you working on a Bridge straightaway brought back memories of my first job after finishing my apprenticeship. I went from a Shaft shop to a Fab shop. Most of the work I was involved in was repair work. Much the same as you show in your videos. I was lucky enough to have a boss who was a Welding Inspector. The not so lucky part about this job was occasionally working in a local open cut mine. Pretty much every time I went to site. It was either raining or it had just stopped raining ??? I can only remember maybe half a dozen times that I went there it wasn't muddy ?? But, the pressure was definitely on with a boss as a Welding inspector.
@scotthultin7769
7 ай бұрын
First 👍's up on fire welding thank you for sharing 😊
@JohnSmith-lv8xk
7 ай бұрын
Now you can put bridge builder on your resume 🤣 good job as always. If I was still living in Modesto I'd come work for ya
@ypaulbrown
7 ай бұрын
every video you are up to something different kool........you da Man , Mr Greg....
@timtrax918artisan8
7 ай бұрын
I can relate to this vidieo as a 35 year road and bridge man. We would call this welding the beams to the bearing assembles. I can say sir that your going above and behond for a quality weld than i typically see.
Thank you for sharing, always a pleasure watch your project 👍👍👍👍
@charlietanner6211
7 ай бұрын
great video glad you put settings in i just bought wire machine gotta lot of relearning to do im ol stick boy
@scott5747
7 ай бұрын
I remember a freeway bridge on 101 south of Eureka fell off the footings. Probably earthquake caused. 2 cars drove into it late at night. It closed the freeway north bound for some time and we had to use the frontage road (I was driving truck back then). I'm glad they are at least trying to hold them together these days.
@Jacob-40
7 ай бұрын
Fresh video. good job 👍🏻
@frfrpr
7 ай бұрын
Always fun here. Good filming. Thanks
@harveystephens6115
7 ай бұрын
Nice job! Enjoyed!
@user-vy8lp1zv8z
7 ай бұрын
Really cool first time I ever seen anything like that😊
@rudyrivera7426
6 ай бұрын
Cool video! Good change! 👌👍
@ronpatterson5483
7 ай бұрын
Another interesting job. 🤘🤘🤘thanks.
@danielpullum1907
7 ай бұрын
I really enjoy the variety that you send us. I must admit, pre-heating has been a failure on my part. i'm always amazed at how much better even the simple jobs run. That looks like a pretty rugged area, boulders, stream etc. Nice to be out in the boonies. LOL Happy Turkey Day to Ya Laddie.......
@watch1ngy0utub3
7 ай бұрын
Nice work truck!
@glenngosline1710
7 ай бұрын
Bridge bearing plates. Great job.
@bigsway4414
7 ай бұрын
Yeah I’m taking whatever I make from this job and giving myself the rest of the day off👍
@sackvilleweldingservices
6 ай бұрын
Interesting job that young man!
@zburdette1223
7 ай бұрын
Nice job 👏 👍 😊
7 ай бұрын
Bom trabalho amigos!!! Acompanahndo daqui do Brasil!!! Boa sorte sempre!!!
@Cancun771
7 ай бұрын
Oh wow! It must be *Infrastructure Week!1*
@jspice-kl2wc
7 ай бұрын
Thank you.
@bruceslattengren8587
7 ай бұрын
That was great see ya 😊
@iainkinsella4708
7 ай бұрын
Nice change of pace
@josephsantoresr897
7 ай бұрын
Nobody thought about expansion and contraction when dreaming up this bridge. Keep an eye on your anchor bolts where there cemented in. Won't take long.
@OFW
7 ай бұрын
I made that exact comment to the head guy there.
@douglasweller9709
7 ай бұрын
I totally agree, there’s no float in that system. The steel was 30 some degrees when welded and every day that’s going to expand and contract. Something has to give. I assume this is on private property.
@skitown11
7 ай бұрын
I've done the exact thing that Greg just did and the baseplate holes were slotted on the anchor bolts. Also, those little cross girters were welded in the field unless they got a permit for a really wide load. Gotta be at least 15 feet wide.
@guygfm4243
7 ай бұрын
Good one
@blueweld75
7 ай бұрын
You always crush it dude!!! Just watch out for LOF with a 2F dual shield. Its great out of position, and in the flat with all kinds of joints. Its just easy to get LOF at the root of the joint in the 2F , due to the properties of the wire being a faster freezing puddle for out of position welding. It can be done , I have made good 2F welds with dual sheild. You just have to really make sure the slag dont roll over out in front. Cut and etches really help with this. Kepp crushing it dude !!!
@1963SMITTY
7 ай бұрын
What is LOF?
@TronVila
7 ай бұрын
@@1963SMITTYlack of fusion
@johnmcgowan9903
7 ай бұрын
Right at preheat temp
@dillydilly3360
7 ай бұрын
Me out here throwing boogers on everything with my harbor freight special.
@jayjackson1280
7 ай бұрын
Sweet job 🤑🤑🤑🤑
@MrJreed92a
7 ай бұрын
Hey Greg, curious what certifications you carry? How often are you finding work requiring certification? Thank!!
@OFW
7 ай бұрын
I have 13. All different kinds from aluminum,titanium to unlimited pipe and structural steel.
@augienajera642
7 ай бұрын
Early morning Bad A......!!!
@brandon2076
7 ай бұрын
We just got a used Big Blue 300 Pro diesel at work, and we'll be needing to hardface some very large loader buckets in the future...what do you reccomend for a wire feeder for general use as well as hardfacing? I could use stick, but for a job that size it'd be time consuming and more strenous i assume.
@OFW
7 ай бұрын
Definitely wire over stick. It’s so much faster and easier on the welder. I run Miller 12vs and arcreach 12. Both are great for that application.
@williamthomas9463
7 ай бұрын
Lincoln LN-25 Pro!
@paulusmarc
7 ай бұрын
Bon Boulo 😆😆👍👍
@12Georgia83
7 ай бұрын
👍🏼
@timspicer3270
7 ай бұрын
🙂
@yenerm114
7 ай бұрын
👌🏼🤘🏼🤘🏼
@n.b.p.davenport7066
6 ай бұрын
Is that bridge falls apart you are in trouble buddy😅
@mikev.1034
7 ай бұрын
👍🤘🤙
@jakebrewer7829
6 ай бұрын
What is your setup for supplying shielding gas to the wire feeder? Is it on a hose reel? How much hose do you keep on the truck? Thanks.
@OFW
6 ай бұрын
Yes, it’s on a hose reel. 50ft reel and an extra 100 ft hose.
@dans_Learning_Curve
7 ай бұрын
I hear metal prep is key to welding. The only prep I saw was the preheat. Can you weld non-shinny metal because of the duelshield? Thank you for the reply! Enjoy your videos!!
@OFW
7 ай бұрын
It was cleaned with a wire wheel on a grinder beforehand. But it is better to have shiny steel to weld.
@williamthomas9463
7 ай бұрын
In a perfect world, sure you would always have shiny metal but, in the real world of structural welding; If your supervisors catch you grinding off the mill scale before every weld, you won’t be welding there long. I’ve even been reprimanded for grinding off paint and galvanizing.
@57menjr
7 ай бұрын
Have worked in nowhere many times .................
@ypaulbrown
7 ай бұрын
so is this the 'UnAbridged' version ???.....always greet stuff.....
@alphaomega9033
7 ай бұрын
ON FIRE WELDING BATTALION, Battling the Weather, Battling the Steel, Angels from Heaven Who "Is Real Light", Ready to Fight ALL Enemies of Eternal Life's Light, Casting ALL of Our Enemies into the Eternal Hell of Eternal Night!
@melissatuason2395
6 ай бұрын
We see a lot of Oxy/Propane cutting as an alternative, my husband can't find someone that can explain the real advantage & how it cuts. Could you shed some light on this subject, he did conclude that it takes a different hose & tip to make it work properly. Your comment (s) and opinion is needed on this. His morning coffee show before he goes to the barn is On Fire Welding and I C weld, pretty funny !
@OFW
6 ай бұрын
I have cut with propane/oxygen and I hate it. It burns colder and takes longer to heat up the metal. I don’t have a ton of experience with it. I just stick to acetylene/oxygen. But for pre heating, as in this video, propane can be a good option.
@melissatuason2395
6 ай бұрын
@@OFW Happy Thanksgiving to your family thank you
@1963SMITTY
7 ай бұрын
What made you go with the 71a85 over the 71a75?
@OFW
7 ай бұрын
No particular reason other than that is what is listed on my cert.
@kentscoffey
Ай бұрын
Was that one of those 2 1/2 hours welding time and 4 hours driving?
@OFW
Ай бұрын
Yes
@alsecen5674
7 ай бұрын
You work in some picturesque settings!
@randyhughes5160
7 ай бұрын
1/16 is that about .030 thousand and why dual shield I know when I need it hotter I get helium added to my tank
@woodartist2021
7 ай бұрын
One of these days, I’m gonna remember to check my comments for typos before I hit the submit button! 🙂
@stevewesley8187
7 ай бұрын
You can always use edit
@alisciamarotta3888
7 ай бұрын
@@stevewesley8187surprised how many don't use that feature 😊
@becassier410
7 ай бұрын
👍💪🫡🇨🇵🇨🇵🇨🇵
@peterallen3105
7 ай бұрын
Well you can’t weld worth a shit! Not really 😂 hope you are making lots of money cause you are good at what you do.
@rocklanddale8646
6 ай бұрын
BUT THAT IS THE BIGGEST WELD RIG I HAVE EVER SEEN!
@rocklanddale8646
6 ай бұрын
UH THATS A BASE PLATE AND IT SHOULD HAVE A SLOTTED CONNECTION OR THE W MEMBER WILL EXPAND AND CONTRACT UNTIL KERPOP SHE GOES U GUYS SALT YOUR ROADS?
@OFW
6 ай бұрын
I brought that up but it’s not my design.
@j.r5064
7 ай бұрын
Question, and pardon my ignorance. Wouldn't stick welding be a lot stronger than mig?
@OFW
7 ай бұрын
Actually no it wouldn’t. It all depends on the wire. The wire I used is used to build buildings and bridges. It’s stronger than the traditional 7018 stick rod.
@williamthomas9463
7 ай бұрын
What he’s using, while it’s the same equipment as MIG, is NOT MIG. It’s gas-shielded flux core. Whole different animal!
Пікірлер: 80