Part 1 - kzitem.info/news/bejne/kaikk66Vb51kpG0 Part 2 - kzitem.info/news/bejne/p61o23donJV6pXo Part 3 - kzitem.info/news/bejne/tK6k2o2qcIt7iqQ Part 4 - kzitem.info/news/bejne/pnmGz2Wghqp_dHY Faux Wheel Drive T-Shirt (limited run) www.shopdap.com/dap-faux-wheel-drive-tee.html
@firsttodie7013
3 жыл бұрын
would this possibly work on 1gen haldex mk4 golf also ? Or is it diferent haldex gen
@AppyG
3 жыл бұрын
Amazing work and 100/10 for effort, also very nice content and humour great!!!!
@Jesusprayerwarriorbw
3 жыл бұрын
Found this late sorry, got rid of my 15 R due to blowing out my clutch ankle
@_.R.F.X.L._
Жыл бұрын
Did you weld the haldex clutch to become 50/50 permannent like torsen?
@audiwankenobi361
3 жыл бұрын
Watching this has cured my desire to make my Passat wagon RWD.... Thanks!
@jamesadams1776
3 жыл бұрын
Haha same😂
@mortenmoulder
3 жыл бұрын
You guys deserve more attention. The amount of work put into these videos is amazing.
@bears198542021
3 жыл бұрын
This reinforces what I'm learning in school, also teaches me a few things. Thanks for sharing
@onelowvdub
3 жыл бұрын
Man I wish my wreck yards had newer vw like that yard .look at all the parts 😭
@jayxtreme6
3 жыл бұрын
Pro tip: if you round off a inner hex drain bolt, you can usually hammer in a torx bit.
@plamendimitrov5762
3 жыл бұрын
Dang, glad YT recommended this. Actual inspiration to sit on my A$$ and work on my mk3 rwd hybrid idea...
@aroundomaha
3 жыл бұрын
My favorite build series. I can’t wait to watch this thing, explode or whatever it does.
@jeremiahjohnson3018
Жыл бұрын
The fact that the differentials are different, is poetic. It also reminds me of why I like my Subaru.
@Sniper2DaFace
3 жыл бұрын
This series is amazing. The chemistry and comedy between everyone is magic. Please MOARRRR.
@Jude3e
3 жыл бұрын
21:32 Everybody sharts. And if you've never sharted just know the day will soon be upon you.
@Atrociousa3
3 жыл бұрын
Some fwd 02q’s can be converted to awd by using the diff off an awd car or installing an awd lsd. Some trans already have the bolt holes for the bevel box. Just need the proper seal and bevel box.
@WreckedRevival
3 жыл бұрын
Would the Haldex clutch pack not cause slipping since it's before the diff and also a clutch based system? I've seen Kyle from boosted bois weld a similar style clutch based system that's on CRV's for that reason and is why I ask.
@ChristopherPuff
3 жыл бұрын
I loved this series of videos. I have changed my mind about swapping haldex into my GTI. WOO that SWAP was tricky, and I’ve done a few auto to manual swaps in older fox mustangs. But this swap would take forever!
@Kiss__Kiss
3 жыл бұрын
You guys are such PROs!!!!! I love this series!!! Miss the Alltrack vids...
@psavel274
3 жыл бұрын
The 'junkyard sharting' had me dying.
@okanelkin
3 жыл бұрын
I love all the movie references. I know I’d get along with these dudes really well.
@rob.ny-la
3 жыл бұрын
You guys make buying and driving foreigns fun. I thought the Vw Tiguan was a mythical vehicle. Never see them running.
@HectorM777
3 жыл бұрын
I´m enjoying this series so much! keep it up!
@sawyercrosby3710
3 жыл бұрын
“And then you gotta wiggle it- like this. Side to side.” Exactly what its like putting a transmission back on 😂
@jackham2549
3 жыл бұрын
This is a very entertaining series.
@eastwoodchuy7358
3 жыл бұрын
This motivates me to rwd my passat
@xjackfighter
3 жыл бұрын
Great stuff guys, keep on going. Will the clutch plates and haldex oil pump sustained pressures from diff lock, and why you didnt weld clutch platws to the diff? Will rear diff from a4 quattro in some crazy way fit to your golf?
@MikeMcDonoughUS
3 жыл бұрын
Thanks for sharing your struggles. I can definitely relate!
@kiddcisco
3 жыл бұрын
So cool , what an awesome project attempt
@LL-se1vj
3 жыл бұрын
Allot of work, thanks for the learning process! 👊💪
@rossbowman202
3 жыл бұрын
Another great episode gentlemen.
@daszieher
3 жыл бұрын
Hahaha! Finding out that Passat and Golf are different platforms... The hard way 😃
@jessevanwoensel1172
3 жыл бұрын
Sounds to me you will have to make a rwd w8 passat. You already have the diff now 😜
@drakeorion94
Жыл бұрын
Had a peach tree growing up...i hate the smell of peaches now.
@dannes6492
3 жыл бұрын
The right headline would be. Welding our Magna Diff for RWD pt3. Haldex is only the clutch and Magna make the rear axle.
@3vil8unny
Жыл бұрын
I eventually would love to turn my 08 fsi git in to awd so this is a great vid to get rough idea thanks guy always love the vids
@EmpoGTR
3 жыл бұрын
Dream to have jynkyards like those...
@jesse.vr6
3 жыл бұрын
ive been dreaming of gutting a mk1 tt and doing this... and putting the parts in my gti. maybe some day
@chrisrutherford3862
3 жыл бұрын
It's Haldex School day yaa ya
@lemagreengreen
3 жыл бұрын
I gave myself permanent tendonitis and shoulder injuries doing gearboxes on axle stands... doesn't look much better with the lift :P
@AlienLivesMatter
3 жыл бұрын
7:35 weld the clutch pack and the drive shaft
@washa2624
3 жыл бұрын
Can’t wait to see the ending
@Jesusprayerwarriorbw
3 жыл бұрын
Dope as hell!
@jons6125
3 жыл бұрын
Have you any info on the “diff lock” available on haldex transporters or is it not actually a diff lock?
@l4h338
3 жыл бұрын
That air filter/turbo must have some serious heat soak 😳
@austinregister990
3 жыл бұрын
you could just pull the front diff from the r32 or a golf R and put the GTI ring gear on it. Presto! (ask me how I know lol)
@thebirmsable
3 жыл бұрын
Sweet GTI shirt from Blipshift. I have the same one.
@carpartsandaccessoriesexpl7495
3 жыл бұрын
Informative!
@orbiterL
3 жыл бұрын
How nice that you were able to make a few minutes of video without the fart noise!
@tonyfoxx7217
Жыл бұрын
Hi, you guys have done a great job and I admire you, I'm watching you from Russia through a translator. I own a vw Jetta 5 1.6 BSE DSG 7 and my dream is to do a swap on vr6 3.6 and make all-wheel drive. Good luck to you, you are well done.
@JimnyVR5
3 жыл бұрын
Could you somehow weld the Haldex clutch or will it just take the 500hp without problems?
@xXFlomoshenXx
3 жыл бұрын
Well actually on ABS System when bleeding you have to start at the closest to the mastercylinder. That's because you want all the gunk that collects in the reservoir and in the Abs block on the fastest way out and not through alle the long hoses to the valve that is the most away. Pls correct me if I'm wrong :) nice car btw
@donkmeister
3 жыл бұрын
Just wondering why you didn't replace the Haldex with something solid whilst you had the diff unit in pieces for welding? Seems like it would remove a point of potential failure, plus save the cost of the aftermarket 4wd controller.
@jeroenjong7302
3 жыл бұрын
How did you fix the problem with the fuel pump? I have the exact same problem with a mk5 GTI haldex swap with TTRS pump..
@derschwarzgeist
3 жыл бұрын
Imagine not wanting millions of peaches, peaches for free.
@Deutscheautoparts
3 жыл бұрын
Peaches come from a can, they are put there by a man
@michaelstrongbow2336
2 жыл бұрын
20:55 "Why are there so many CC's?" "Because they jump timing." Now I'm just wondering, was it the chain tensioner?
@francoleon91
3 жыл бұрын
Enjoying this new series alot, was wondering what ever happened to this bt mk5. Hope it works out 🤘🏻
@kayrol18
3 жыл бұрын
8:32 wait what ? that was that weld ? how long did it last ? :D
@rafaelcordova6374
3 жыл бұрын
Love the content! I only have one question, why haldex, why not Torsen? All of your predictions sorround the integrity of a Haldex.
@benfeacey860
3 жыл бұрын
Buy an old S3 take front shafts out weld diff away u go ..ha ha . amazing project guys Mk5 will be a mental drift car good chassis .well done 👍👍👍👍
@rustbeltrestoration
3 жыл бұрын
Hearing you say that there’s so many ccs in there because they jump timing really scares the fuck outta me. Mines a 2012 and I just hit 110k
@DaanBmx115
3 жыл бұрын
I also have a CC with a 2.0tsi, bought it with 150k km’s. Timing chain jumped (chain tensioner failed) at 162k km’s (around 100k miles). I was lucky that it jumped with starting the engine, so it saved the engine. Probably drove around with the problem for a while before it happened. So, if you get a check engine light, diagnose it immediately and maybe you can save your engine. Most common engines are the 3.6 fsi and the 2.0 tsi with this problem.
@lukegadd4988
3 жыл бұрын
What about the 2.0tdi 4motion gearbox an running gear?
@ethanstang9674
3 жыл бұрын
Love the videos guys. Been wanting to convert my MK5 to AWD for a while now to help with my traction issue haha. This series just proves it's totally do-able! I've had a really hard time tracking down an AWD manual transmission but I found some DSG's. I'm curious, would it be possible to swap the AWD DSG front diff into my 6MT so I can attach a bevel box to the other end? If I explained that so it makes sense... Thanks!
@brumtownbaby8601
3 жыл бұрын
Couldn’t use a 8p s3 gearbox? That’s what is used in the uk for awd swaps
@Deutscheautoparts
3 жыл бұрын
We didn’t get that car but yes would work.
@TruEGTI
3 жыл бұрын
Keep it up boyz!
@VWPassat_3BG
3 жыл бұрын
When you said VW uses same bell housing bolt pattern for all 4cyl engiens, do that counts for tdi's as well?. Bdw awesome project ;) i really like enjoy watching it.
@terryb9851
3 жыл бұрын
Yes
@davembman3285
3 жыл бұрын
Still looking for the answer:why would taking off my oil filler cap send my engine while running, into a erratic surge? Gen3 1.8t ea888
@DevineDigital
3 жыл бұрын
I feel like my comment from yesterday has some foreshadowing in today’s episode “Passat haldex”, I’ll find out more after watching. Edit: whoop there it is! Dang at least you all figured it out, it stinks because I did the same on my MK6 Jetta.
@Carrjam
3 жыл бұрын
Guys, you should fit bigger brakes to this Golf. These tiny stock calipers look ridiculous. Use a VW Touareg calipers and disks from ML Benz or Volvo, its a bolt on upgrade.
@zahaidrahman2052
3 жыл бұрын
Was welding the dif really necessary? We wanted to know how a rear wheel drive gti works! And know we can't!
@benjohnson9930
3 жыл бұрын
I'm currently in the process of trying to plan doing a 4wd conversion on a skoda fabia vrs mk1, same platform as a 2005 vw polo in america, do you know if the gearbox that you used and the 4wd bolt on transfer case is the same as a 02m 4wd gearbox. Many thanks.
@Math4real.Schramm
3 жыл бұрын
Why didn't you guys use the limited slip y'all had already?
@barborisov
3 жыл бұрын
Actually bleeding brakes on vw you start with closest to the master! Good video though! Actually its great 👍
@underdogproject9373
3 жыл бұрын
Those 6 speed are heavy 😂😂😂
@spinnetti
3 жыл бұрын
Didn't chatch it - Did you weld up or fix the haldex clutch too? If not, only parttime powertrain? PS, slide hammer for pulling the driveshaft stubs is a lot easier.... ;)
@livbuczek9944
3 жыл бұрын
Hey guys, i love this build! I’m super interested in starting my own project car. I was wondering if you guys ever went to school for auto tech? Or is this just experience from over the years. I’m currently in school for machining, but i would love to attend an auto program later in life
@livbuczek9944
3 жыл бұрын
I just now realized you guys have a whole shop, so i assume it was not from just over the years
@Dave-fx5zw
3 жыл бұрын
I might have missed something as I skipped through the peach tree portion of the video, but how are you modifying the Haldex to be fully locked? Will the old gen 1 longer bolt mod work on this, or are you relying on the controller to handle it?
@leakyshart9943
3 жыл бұрын
I believe in part one they said they’re using the controller
@Dave-fx5zw
3 жыл бұрын
@@leakyshart9943 thanks, I skipped through that one too. Find it strange to weld the spiders and leave the multi-plate able to slip.
@dennistjelta3031
3 жыл бұрын
Youre the guy from Hangover movies
@lilmangofast
3 жыл бұрын
I knew about the different bolt patterns of the VR6 and 4cyl. Does the 07k have its own?
@scottshipley
3 жыл бұрын
Is one of your rear springs upside down?
@edclips
2 жыл бұрын
Is welding the diff necessary, or is this for teh doriftu?
@dorkultra
3 жыл бұрын
i want to hear more about this peach tree dilemma
@williamaguiar14
3 жыл бұрын
You guys are hilarious lol
@earlygamer9106
3 жыл бұрын
Haldex controller was not an option?
@timothyblake5532
3 жыл бұрын
Did I see it correctly: you welded the RWD Differential?
@davidnovelo6731
3 жыл бұрын
I got a question, how much would guys charge for a manual transmission swap for 2008 R32.
@mkfourgli1
3 жыл бұрын
So you can use the haldex from a passat??? What gen passat
@cse5975
3 жыл бұрын
Uga Duga... 👍
@nicklabonte9152
3 жыл бұрын
I wonder if the r32 haldex system would fit my gli
@pontusstahl
3 жыл бұрын
With that plate you welded in the diff the stubby axels would not go in 100%.
@jaimegsus
3 жыл бұрын
Please tell me you didn't weld the diff just as shown... You need to actually weld the held our of that planetary gears to stand the torque on the long run, not only few spots welds
@OZobboy
9 ай бұрын
is audi mk1 tt rear subframe is same as golf r32 ?
@melvinthemechanic
19 күн бұрын
8:54 Thats what she said
@doublejmotorwerks
3 жыл бұрын
I have the Front right inner cv spacer that you WILL NEED to make it 4wd.
@9k827
3 жыл бұрын
What’s up with the coil springs at 11:00
@ivanbreva5764
3 жыл бұрын
Look at 9:10 too haha, i don't know why are they installed like that
@dantem306
3 жыл бұрын
Day 3 of commenting until y'all are done, Great episode!
@Rellsrides
3 жыл бұрын
He was twisting the impact screwdriver the wrong way
@brentweiser3596
3 жыл бұрын
I need to perform some welding on my car with my everlast. Anything I need to do to protect the car's electronics?
@andries514
3 жыл бұрын
Just take the battery out.
@zzzbooring
3 жыл бұрын
lol, you bleep ghe "sh*t" but not the "shart" that's quite funny :) gr8 clntent
@bpetrozelli
3 жыл бұрын
I live in Mooresville what junkyard is this?
@hallvardnrland9818
2 жыл бұрын
Will this work for a 2000 S3?
@WillThat
3 жыл бұрын
I have a feeling the diff will be the weakest link. 🙃🤞
@elNenio
3 жыл бұрын
You guys should have welded the transfer case too... fuck that haldex shit! Lol
Пікірлер: 168