Well, I for one am grateful you have stuck with this project. I have learned a lot watching your trials by errors and am really looking forward to your successful completion. It's gonna be cool.
@davidj4662
2 жыл бұрын
@@SAIFSWORLDFUN That's a good reason to not do what everybody else is doing.
@craigcaggiano431
2 жыл бұрын
Looking good, keep going and get one task done at a time.. Remove engine and paint the engine bay, then brace up the shock towers and get the engine mounted
@pieterverboven4853
2 жыл бұрын
@Pumpkingilmour He won’t, can’t you see he absolutely hates working on this old junk. Could have done 3 modern cars in the same time. Even his 720s which was A LOT of work went smoother. Old cars are just not worth it unless its something extremely valuable or unique which then leads to a very high value when done. This thing will either crash or be scrapped because its a death trap.
@david888a
2 жыл бұрын
@@SAIFSWORLDFUN this long overdue build will be scrapped in the end like his old mustang builds, there is no time line for him to finish it where else B is for Build finished his a long while ago.
@goldguy4675
2 жыл бұрын
@@pieterverboven4853 Agreed. Plus he is way out of his league on this one. He isn't a mechanic.....he's a frame guy. He barely knows how engines or cooling systems....electrical etc even work. All these videos of him farting around are just him avoiding facing the real problem....that he can't figure out how to actually complete the car. Or even get it running for that matter. I hope when he finally scraps this one....or somehow pretends he's finished it by barely getting it running and painting it that he's learned something. Know what you know and know what you don't know.
@rgreer3377
2 жыл бұрын
I’d put a ford 9” for strength, since you will be adding twins in the future. Also don’t burn your self out, you are working on what is normally a Multiple year project. It takes time to fab and build, what you are trying to accomplish. Keep up the good work.
@rgreer3377
2 жыл бұрын
@@Stylofo4m agreed on the editing part, but the project is even more tedious. Even Goonzsquad Camaro is still sitting on a lift untouched since completing the body work.
@DutchStangs_Garage
2 жыл бұрын
@@rgreer3377 not anymore 😉🤣
@rgreer3377
2 жыл бұрын
@@DutchStangs_Garage nah still waiting, just opened a box of headers, that they’ve been waiting a year for. Lmao
@kentbaio4457
2 жыл бұрын
Don't give up man it's going to be awesome when you get done I watch every episode I can't wait to see you finish it up keep it up you a great guy when it comes to doing body work and building cars
@JOHNABLANK
2 жыл бұрын
Hang in there V ! Nice work! It has to be hard doing all of this by yourself (building, designing, manufacturing, filming, and editing).This is going to look great!
@WildBillFlysRC
2 жыл бұрын
Nice job installing the dash! I have been using Ospho for rust removing on my 65 4x4 build. the stuff works very well. Stay on it Vtuned! you will have it done very soon.
@yarkie1
2 жыл бұрын
I can imagine it getting lonely and at times, overwhelming. I built a 67 f100 with custom everything and there were times I hated the thing. But keep going! Mine is driveable now and I've been loving it for 2 seasons. It's worth it!
@bryduhbikeguy
2 жыл бұрын
Ford Explorer differential should fit,and allot have Limited Slip which you want.The insulation is great.The dash work was 'spot on'.Strut brace after connecting the shock mounts to the bar will be perfect.You're doing great Ben!How about blue calipers with white letters to Pop behind the wheels?
@125spectrum
2 жыл бұрын
Stick with it. We appreciate all your work. All the best from Paul, Scotland
@hebe1792
2 жыл бұрын
Good work Mr. V. Set yourself milestones to keep motivated. I think getting this thing painted will help with the morale. You are getting there... it will be badass.
@fatt1729
2 жыл бұрын
you got it keep on with the project it will come out really nice when its done. You got a really nice garage setup so that really helps.
@bryanbrunk1186
2 жыл бұрын
The 8.8 has the most aftermarket support and is one of if not the most widely used rear end ever. The 8.8 comes in so many different widths and the most important thing to check is if you have a true center diff or offset dif. You can triangulated four link coil over, four link coil over with watts link, or straight 4 link with leaf springs or panhard bar. I would go watts link 1st, second choice is triangulated 4 link and last would be leaf spring or panhard bar.
@whatsapp1210
2 жыл бұрын
Yeah 👆🆙️👆congratulations don't miss out Send a direct message you have been given an ENTRY FOR THE GIVEAWAY......
@theroofer3181
2 жыл бұрын
Glad to see your brothers gave you back your sanding tool. lol Baby steps Ben. Don't get discouraged by the time it's taking.
@galaxystar527
2 жыл бұрын
I've been here a few years..give or take...but never sell that MC Larren...you put your sweat and blood in that build and to come back to this build with the same expertise and adding so much more is just an experience for the whole world to learn from you...seems like more than half America wants you😄 even watching your hands move...still amazing how you line things up ...to bad Mark isn't here...but keep it flowing Ben..👍..im too far away like Japan rightnow but...absolutely wish was your cameraman though...keep em coming👏👍
@miltonpomales5405
2 жыл бұрын
I agree with you, Ben. Get all the people that you help to help you getting the Mustang closer to the finish line. Keep it up!!! Nice glasses too!!!
@alanpaulick7815
2 жыл бұрын
Thanks for sharing your video Ben. Keep up the great work on the Mustang.
@CJMediaOfficial
2 жыл бұрын
Hey Ben, glad to see you're still going with this project dispite the challenges! Just think of the day you'll be cruising this down the road. Gunna be spectacular 🔥
@fposmith
2 жыл бұрын
Dude ! You need an "Ice Blaster" ! Just cover that sound deadening with another piece. You can never have too much of that !
@whatsapp1210
2 жыл бұрын
Yeah 👆🆙️👆congratulations don't miss out Send a direct message you have been given an ENTRY FOR THE GIVEAWAY......
@RandySmith-iz1ml
2 жыл бұрын
Get her done buddy! God give you what's needed to do it! Keep up the good work. Not sure you'll even need the twins with how light this car is.
@eddieconquest6018
2 жыл бұрын
you're probably going to have to relocate the master cylinder especially running a stick shift because the brake pedal will have to be in line with the master cylinder for the rod to work correctly just a suggestion
@rr122608
2 жыл бұрын
I know you must be exhausted and wanting to throw the towel on this project, but you will be rewarded once you complete this huge project.
@whatsapp1210
2 жыл бұрын
Yeah 👆🆙️👆congratulations don't miss out Send a direct message you have been given an ENTRY FOR THE GIVEAWAY......
@tonyc9260
2 жыл бұрын
Hey Ben im so glad your back, I know it can be exhausting doing these builds by yourself but it would be nice to have someone to work with you so you don't kill yourself, however I love your enthusiasm for your work please don't give up lots of people look up to you and loves the content you bring 😊 thank you. Can't wait til the next video.
@bnelson313braveheart
2 жыл бұрын
It has always served me well in projects to write down all the steps/items required to complete the process. Once I do that I don’t have to think about it during the night. In fact I seldom ever looked at the list after that. I know it’s sounds weird but it work for me. Try it and see. Love you videos.
@whodey8691
2 жыл бұрын
You’re getting there buddy keep it up !!! Awesome work and attention to detail, definitely my favorite car KZitemr!!!
@ionizationx
2 жыл бұрын
I want to give you a compliment: I find you the most sympathetic car builder youtuber of all. Dont change.
@waterislife.9204
2 жыл бұрын
Build is coming together slowly but surely. It's been awhile since I watched your videos. Shop looks amazing.
@jonatanzurita9399
2 жыл бұрын
Great to know that you'll paint as it was before🙂. Excellent choice.
@jay2wip
2 жыл бұрын
Don’t give up V money! It’s gonna be worth it! I know you’re going to make it look beautiful!!!
@darindougherty9341
2 жыл бұрын
Ford 9 inch will hold whatever you throw at it. Wimbelton White w/ Caspian Blue stripes would be the colors for that year if you want it to appear more color correct. Whatever you put on it will look great though.
@whatsapp1210
2 жыл бұрын
Yeah 👆🆙️👆congratulations don't miss out Send a direct message you have been given an ENTRY FOR THE GIVEAWAY......
@paulgunter1538
2 жыл бұрын
Glad to see the car coming together Ben. This has been a long build, but now its getting closer to done. Great choice on the color combo. Classic Mustang colors !
@michaelbidlack5739
2 жыл бұрын
I love this car. I know it's a pain and a money pit, but it's fun to watch it coming together. Dash looks fantastic...
@lfilson
2 жыл бұрын
That dash looks badass, I want to put one in my square body.
@hubertdouglas9509
2 жыл бұрын
The last leg is always the hardest. Much love and support from Borneo. You inspire people from around the world. Hope to see this beast of a car done soon!
@oscar_dubs
2 жыл бұрын
Don’t lose steam. You can finish this build buddy !
@whatsapp1210
2 жыл бұрын
Yeah 👆🆙️👆congratulations don't miss out Send a direct message you have been given an ENTRY FOR THE GIVEAWAY......
@floydsgarage2653
2 жыл бұрын
~Wasn't wearing my glasses so I cut a car in half~ 😂😂 I literally laughed out loud, people looked at me funny 😂😂
@pauliecabs
2 жыл бұрын
I think once it's painted you'll see how good it looks and that will give you the motivation to get it finished. Keep pushing😀
@goldguy4675
2 жыл бұрын
Wonder if he'd Krylon the body too
@marvelfanr
2 жыл бұрын
Glasses look great!!
@aaronuuu
2 жыл бұрын
Pls don’t give up on the build and channel. Looking forward to see this and the truck finished.
@JMRRebuilders
2 жыл бұрын
Bro you gonna be triggering folks with that angle grinder action on the dash board. IM like heck yeah son get it. Love it brother keep getting after it.
@FrankieYLosMatadoresOficial
2 жыл бұрын
I have been waiting for a long time to see this car running , please keep this project going 🙌🙏
@goldguy4675
2 жыл бұрын
How many years you got?
@viperexpress305
2 жыл бұрын
Hang in there Ben, it's going to be worth it when you're finished !!! 👍🍺 😀 Hard work always pays off in the end !!! 👍🍺🍺🍺
@desmomotodesmomoto2033
2 жыл бұрын
Lots of progress! Wonderful build.
@fattonysgarage67
2 жыл бұрын
Breaks my heart hearing you say that you are tired of working on that car. Bro don't give up. you are doing amazing on the build. So what if you don't finish it quickly, just don't give up. YOU ARE DOING PHENOMENAL THINGS! KEEP IT UP 💯 👌
@f32440i
2 жыл бұрын
It's taking shape Ben, keep going dude you'll love it when it's finished. Patience is a virtue
@davidconley3610
2 жыл бұрын
I’m interested in seeing if headers or exhaust manifold’s fit without cutting!
@jaysmith5084
2 жыл бұрын
They are going in reverse so the collector will be on top
@projectbumblejeep4190
2 жыл бұрын
For something like this with the engine/trans combo, the Ford 9" is a good choice. IMHO. God bless and stay well.
@howardrice9527
2 жыл бұрын
Do not give up on the mustang Dude, the dash looks sweet. on the dash left side the lights and wipers switch and right I think was the choke or air vent. Stay safe.
@therattyrod3342
2 жыл бұрын
The 9 " is a great diff, but you may need to use one with a speed sensor, which I'm not sure if they weremodern enough to have one. If not, the 8.8 is the way to go. Awesome build, and keep up the great work man.
@traderz3399
2 жыл бұрын
White car, blue stripes, white 6 spoke rims, blue calipers🤯
@larryheagren5171
2 жыл бұрын
Use Moser street axles and a Ford 9 inch. Moser will make the axles to your length specifications. Pick your wheel and tire combo and offset do the math and cut and weld the housing to your specs and size the axles accordingly. I'm sure you could get a sponsor to provide you with the drop out 3rd member or find a good used one preferably a locker. Use a Ford aluminum driveshaft. The best ones are from old Police Interceptors (Crown Victoria's). I had this setup in my old Vega and it is bullet proof. I was running a 430 HP Chevy.
@noel-wt6ek
2 жыл бұрын
Every day I come on you tube and look to see if Ben put up a mustang video. I feel like a crackhead jonesing for another hit (I’m assuming how this feels). I feel the same way when working on my car. It gets old, you’re tired, you question your sanity cause it’s taking so long. Don’t despair!! It’s getting there and looking beautiful!!
@GiantMigit245
2 жыл бұрын
Well done. I'm very excited to see the final result. But take your time and do not rush it for our sake.
@DumbCarGuy
2 жыл бұрын
Its coming along nice. Seems its about time you toss this one to the parking lot and start another mustang project. Although its great you made it this far without tossing it to the sidelines.
@steperez84
2 жыл бұрын
Don’t give up, I enjoy your videos and truly believe you can finish this project. Keep it up brother
@jeffcamara
2 жыл бұрын
That explains the welds brotha!! Lol just go by touch!! Good work!! 👌
@jasonnovia1846
2 жыл бұрын
Looking great! Stick with it the journey is the story when you’re done you’ll have a great story to tell about this car!!
@ShaffCloud81
2 жыл бұрын
don't stop! i can't wait to see this finished, i was sad to hear you stopped on the other one but i understood why. Its coming along great
@michiganracer1181
2 жыл бұрын
Get a project book and start writing down your plan and a time line. It’ll help you stay on track and not miss anything. Make a list of “to do’s” and start checking them off. Just checking things off a list can give you motivation.
@willmatic84
2 жыл бұрын
This project is coming out awesome 👌 loving the custom design 👌
@arash3500
Жыл бұрын
I realy enjoy watching things you do thank you
@one.2622
2 жыл бұрын
Vtuned you are a straight but beast! I do think it would help to hire someone to help you around the shop. Ordering parts and helping you with heavy lifting. You do amazing by yourself but having a partner there always makes thing a bit more fun.
@tonybruno7917
2 жыл бұрын
Thanks for the upload another video is coming along I'm sure it's going to come out awesome nice paint chrome wheels
@Haroldb70
2 жыл бұрын
My grandma had a pair of glasses just like those. Great work thoug.
@sergioacevedo2874
2 жыл бұрын
9in ford rear end for sure. Also as others have said get the headers mocked up before you pull the engine so you can do any fab work before you prime and paint and also get vintage air system and run the lines before you paint and button up too! Also harbor freight has fiberglass welding blankets will save you headaches like the sound deadening lol.
@Omonokofiasamoah
2 жыл бұрын
Ben is tired. Man don't give up on this build We are here we'll wait We love you ❤️🇬🇭
@miketdavies
2 жыл бұрын
LOL the glasses crack was hilarious. Keep it up man, but don't burn yourself out!
@racerx2084
2 жыл бұрын
I think you’ll be really happy with a stock NA engine. 400hp is no joke in such a small car like that. I know the Holley tunes itself but find a good dyno tuner to tune and get the mist out of it. Everything is looking great. These types of builds don’t happen overnight. Plus going NA just think of the time and money you’ll save there. Personally I would stick a VMP charger or someone similar on it if I were to go non NA.
@rickbareman2263
2 жыл бұрын
Keep the faith cars looking sweet the finish product will be worth it and you can say I built that buy yourself pretty much no help,great job Ben can't wait to hear it run👍👍
@carrevive
2 жыл бұрын
Epic work in so little time and this is all coming from one brain!! Great job dude that rust remover in the jug your using actually works great it just takes time I have the same product it just has to soak in the solution to help remove the caked on rust
@timothymcleod5122
2 жыл бұрын
Pearl white would be awesome with those blue stripes.
@theanomalous1401
2 жыл бұрын
You can see the finish line, dude. It's so close and when you're finished, you can let it rip or, the market for quality built resto mods are bringing top dollar. You win either way, because you're V~Tuned❗
@goldguy4675
2 жыл бұрын
LOL 'quality' built....
@jimwiskus8862
2 жыл бұрын
Great job Ben! It’s coming right along. Like the new glasses too. Great frame choice.
@furiouswolf777voodoo4
2 жыл бұрын
Hang in there, bro. Don't give up 😎😎😎
@rockycassiano4756
2 жыл бұрын
I got: 65 Mustang 2+2. It came with the HiPo 289 and a 2.90/1 rearend. I broke the rearend doing burnouts..... Motor was rebuilt to: 10:1 pistons, 0.30 over, 0.60 plained off the heads, stock valves, springs to 6000 rpm, Fordmotorsport cam.: 280/290 duration @ 0.50 lift. Rearend was replaced with: 3.40/1. Cam reached max HP at 5500 rpm with speed at about 130mph.... With 4.10/1 would go 110 mph at redline. Rearend: pick a ratio where freeway rpm is less than 2800 rpm. Unless this is a drag/town, non-freeway build..... M2cents.. : )
@SammyFIN
2 жыл бұрын
Keep up the good work Ben! We will all get to enjoy this car when it's finished, and don't forget it's mostly you!
@FransvandenBergeMuziekschuur
2 жыл бұрын
Your glasses look really nice young man! I have seen you on other channels doing your work too. Don’t forget to mention those projects. We love to hear about those too.
@tdwz1652
2 жыл бұрын
totally understand what you are sayin. especially about money and time. just keep chipping away and finish the little things that get you excited about the car again. looking great !
@kickit59
2 жыл бұрын
Vtune I can' t wait to hear that Coyote growl! I am looking forward to the next video!
@donswitzer1799
2 жыл бұрын
Welcome back vtune please don't give up you are doing a good job on yutube because you really help everyone's god bless you keep up the good work
@johnmoore8800
2 жыл бұрын
Yo man you got this build just about done... Keep focused everything else is new and only needs to be bolted in. Your doing a great job don't give up I know it is hard working by yourself and staying positive and motivated! But that is why you have a KZitem channel to check out our comments and our B.S. We all are supporting you can't wait to see this Stang Finished after all this is your second one. You gotta push thru you will find another person who is as interested in building Custom rides like yourself in do time!!! The White sounds cool with blue racing pinstripes. A Ford 9" rear end with posi-traction would be epic. Getting bros to help out is awesome!
@rayshutsa6690
2 жыл бұрын
I have learnt a lot from watching your trials and errors. The mustang is really coming together can't wait to hear it start up. Love the channel and great content. ❤🇨🇦
@goldguy4675
2 жыл бұрын
How? Most of his errors he just continues with anyway and doesn't fix
@nicholasjesusisgood4456
2 жыл бұрын
Ben don’t give up I pray that Jesus refresh you and give you strength I know you will make it across the finish line take care
@whatsapp1210
2 жыл бұрын
Yeah 👆🆙️👆congratulations don't miss out Send a direct message you have been given an ENTRY FOR THE GIVEAWAY......
@davidowen888
2 жыл бұрын
Call them guys at cortex racing for the rear-end options ☮️
@frogman1962
2 жыл бұрын
no rush all will finished in time good job
@viperexpress305
2 жыл бұрын
Welcome to the four Eyes Club ! 🤓👍🍺
@prashamkarunanithi9064
2 жыл бұрын
Great to hear that you're interior is coming together. Maybe for the gauge cluster you go fully digital with a push button ignition system which would look sick and modern. As for the rear suspension I think solid rear axle is the only option I don't think they make custom Independent Rear suspension for this mustang. But if they do its a intricate and tough one to do. In addition it does give good handling. The Ford 8.8 rear end is the main choice as for the differential gear maybe go 3.73 or higher maybe 4.10 gears. Depends, because one has good acceleration, fuel efficiency and the other ratio is vice versa.
@jamesmckelvy5441
2 жыл бұрын
If you plan on doing a lot of racing with it, go with the 9 inch. If you want a good street car and occasionally race it, an 8.8 will probably work fine. There’s plenty of videos on KZitem on how to convert a Ford Explorer 8.8. Find one with LSD and disc brakes, shorten the one side to center the pumpkin and you’ll have a nice set up for the street.
@johncourtneyscott2757
2 жыл бұрын
I can’t wait to see the car painted
@RomnysGonzalez
2 жыл бұрын
Ben roaming around other channels is wonderful and i love it. Always funny to see you on Mark channel and Yuri one too
@keithmason9342
2 жыл бұрын
Hey Ben, I personally would go with either the 8.8 or a 9 inch Ford rear end. They are both pretty stout and should be a good choice for your Mustang. Thanks and we'll see you next time.
@OnkelPHMagee
2 жыл бұрын
6:45 The glasses will help you tell your brothers apart, too. 😃
@patreilly4293
2 жыл бұрын
Great project! Stick with it.
@matthewlaun8095
2 жыл бұрын
VTuned could have easily done a frame repair channel. This Mustang build is just taking forever. It will be awesome once it is completed.
@305sergio
2 жыл бұрын
Uh ohh... poor lil homie is loosing steam. Unsolicited suggestion- swallow that pride and get some help in there. Ask the other crew (goonsquad?) to swIng by and lend a helping hand on something. Get your brothers to take turns and show up for quick stints. Fresh set of eyes/hands will work wonders! Don’t give up hope, man. You’ve got a bunch of us viewers rootin for you! 💪🏼
@michaelyackovich155
2 жыл бұрын
Great video, much anticipated and can’t wait to see and hear it run, also, you do need a few fender stands
@M1LAD81
2 жыл бұрын
Loving the jokes, Ben. You look cool with the glasses. Keep cracking on with the Mustang. Once you're finished and driving it you will never regret it. Plus you'll earn the badge Custom Auto builder!
@alexiscalderon5343
2 жыл бұрын
Smart move on holding up the turbo. Just get it done and running first.
@pistolpete1101
2 жыл бұрын
9 inch all the way!!!!!!! No substitute!!! “That’s what she said”!!
@philtucker1224
2 жыл бұрын
Seems like the vote is for a Ford 9” rear Ben! Keep up the good work, I know what you mean about getting it into paint, you’ll be able to see the light at the end of the tunnel when it’s finally in colour. Keep the faith buddy..🙏
@JayLang7
2 жыл бұрын
The front wheels are fire. Keep them.
@edcollins8506
2 жыл бұрын
Keep going buddy, nice job, don't give up. Take your time, anything worth doing is worth doing well.
Пікірлер: 502