America: "Jimmy get the jack" Russia: " Yuri help me flip the car"
@bobbiejim04
3 жыл бұрын
Not to be racist but Russians make crazy stuff
@JonathanGameHD
3 жыл бұрын
@@bobbiejim04 thats not racist just because it contains the word russian. and, russian is not a (race).
@bobbiejim04
3 жыл бұрын
@@JonathanGameHD oh
@kap1526
3 жыл бұрын
@@bobbiejim04 russian people hold a special places on this planet hahhahah
@valentin7054
3 жыл бұрын
@@kap1526 i think it's called Russia
@ThielTube
5 жыл бұрын
Please don't ever change the translator lol
@666kkf
5 жыл бұрын
He's annoying
@EnglishLaw
5 жыл бұрын
If you find him annoying @@666kkf then why on earth are you watching this version? The russian version does not have the translator.
@666kkf
5 жыл бұрын
Hey Micky because I don't understand Russian
@reallydontlikethem
5 жыл бұрын
@@666kkf i mean you can TELL what they're going to be doing without the communication unless you aren't too versed with automobiles
@666kkf
5 жыл бұрын
Barack Hussein Obama II I know but I'd like to see subtitles instead
@lunafag
4 жыл бұрын
"We have Koenigsegg Regera at home." Koenigsegg Regera at home:
@andrewcoetzee8858
4 жыл бұрын
That was genius
@ghostrunner2138
4 жыл бұрын
haha!
@dejavu3136
3 жыл бұрын
Lada vaz
@adew4u2enjoy
4 жыл бұрын
Love the video. All of them are good. When I was a kid, my dad and I took a 405ci engine out of an old beat up car, and sat it in an old boat. We hooked up the propeller shaft directly to the crank on the back of the engine. Whatever rpm the engine did, the prop did to. That old boat would do 75mph and scare the crap out of us. Built the whole thing for about 700 bucks.
@RsoStone7
4 жыл бұрын
That’s actually pretty bad ass😂 i would love to see the boat. Makes me want to do the same thing!
@benjaminbarton2629
2 жыл бұрын
That sounds so fun
@benjaminbarton2629
2 жыл бұрын
And also almost suicidal
@arjunarun3033
2 жыл бұрын
@@benjaminbarton2629 almost?
@loganmetcalfe6505
5 жыл бұрын
Who needs a car lift? Just roll the car over
@Sheppards1984
5 жыл бұрын
Funnily enough this was a fairly common way of doing repairs in eastern european countries 30 years ago :)
@ianlarimer
5 жыл бұрын
It's a bit slick I doubt they would have been able to on ice
@johnpenguin9188
5 жыл бұрын
Logan Metcalfe it is a Lada after all...
@Vassle
5 жыл бұрын
If I could only do that with my Mk1 mx5 damn
@MegaUser213
5 жыл бұрын
Did you come from supercar suspects? Shop totalled his car.
@nutz4gunz457
5 жыл бұрын
You know you’re in Russia when step 1 is tip the car on its side.
@tct72
5 жыл бұрын
And there was a Lada involved.
@ROTAXD
5 жыл бұрын
Nutz4Gunz45 could be in any third world shithole.
@geronimo5537
5 жыл бұрын
in Russia, car tip you.
@SwapBlogRU
5 жыл бұрын
@@ROTAXD Russia is second world ;) If I remember correctly, the whole "first world" and "second world" deal is (or was) a reflection of the geopolitical situation on our planet, where you have developed capitalist countries (USA, Europe and so forth), socialist nations (USSR, China and certain Eastern European countries), and "third world" countries which don't fit into either paradigm.
@jsbehucbejizveish
5 жыл бұрын
Blyat
@Vlad7sokruta
5 жыл бұрын
Americans:"let's build a small bunker!" Japanese:"let's build a robot" Russians:"hold my vodka.. I have an idea.."
@raspiankiado4658
4 жыл бұрын
"Hold my vodka, *WE have an idea."
@die5el983
4 жыл бұрын
@@raspiankiado4658 *OUR vodka
@tahyabazim696
4 жыл бұрын
Dont have a sip
@deathbydeviceable
3 жыл бұрын
@@tahyabazim696 it drinks the Russian kool-aid or it gets the hose again
@mattwebster675
5 жыл бұрын
Is this Russian top gear ?? 😅😅😅
@jaakkopontinen
5 жыл бұрын
Much better than the charade at primetime :p
@IAmTheEagleHTM
4 жыл бұрын
As far as I've watched his other videos, I'm pretty sure it is
@ellenorbjornsdottir1166
4 жыл бұрын
Da
@brianhaygood183
4 жыл бұрын
No Gear
@HelloKittyFanMan.
4 жыл бұрын
Nah... Russian Monster Garage!
@kubeek
5 жыл бұрын
why didn´t you use the clutch you were talking about the whole time?
@Demonslayer20111
5 жыл бұрын
Right
@KSgd94
5 жыл бұрын
I'm also thinking why didn't they use clutch
@richardschofield2201
5 жыл бұрын
@Ponga Pandit it did have a gearbox. Just didn't have any gears. Can't see why the clutch wouldn't work
@kubeek
5 жыл бұрын
@Ponga Pandit it goes flywheel - clutch - bell housing - gearbox. He left the first three intact and connected the shaft to the first gear inside the cut off gearbox. The clutch is there and functional.
@Frost-ml4vj
5 жыл бұрын
I think it would've been like starting the car in 4th gear, which is pretty hard to do, they should've rolled it
@Sohave
5 жыл бұрын
How about tossing out the entire prop shaft and attaching a hydraulic pump to the motor and a hydraulic motor to the rear differential so you get a Hydro static transmission. A hydraulic lever like the ones used to control a hydraulic cylinder would decide how much of the pressure from the pump goes to the motor and how much just gets returned to the reservoir. Further you would be able to use the car afterwards as a mobile hydraulic power plant to power log splitters, hydraulic scissors and more.
@rjs198585
5 жыл бұрын
It's called Hydrostatic Transmission. Used in lawn tractors and other equipment
@Sohave
5 жыл бұрын
@@rjs198585 True Hydrostatic Transmission is the correct terminology. Hydraulic transmission can also be a Hydrokinetic transmission or a type of automatic transmission. I have corrected it now, thanks!
@patrickgronemeyer3375
5 жыл бұрын
my only note is this man needs a biggy smalls sweater. like for real. NOTORIOUS BIG.....
@jakubtrzebiatowski5308
5 жыл бұрын
This kind of transmission is often used in passenger diesel trains
@ezl7052
5 жыл бұрын
That's been done in the States for several years now and the big fertilizer company's use the big wheeled units forspraying fertilizer and pesticides on the fields. These implements are big and will surprise you how fast they canrun. Since they are powered by a hydraulic pump driving hydraulic motors they have a lot of power. The tires on therigs are at least 8 ft. tall and the wheel base takes up more than a lane on the highway. That means traffic on thehighway will see flashing lights and a big farm implement that is traveling almost 45 mph pull over so there isroom on the highway for traffic to pass. They have the clearance and the power to run through a ditch. How aboutthat for offroad equipment!
@BenPedtke
4 жыл бұрын
I wish I lived in a country where THE cheap beater car to go to was RWD, manual, and had excellent rust protection... Basically the opposite of the USA
@rcard23yb
4 жыл бұрын
They cant afford salt for the roads
@tmxdayan6498
2 жыл бұрын
@@rcard23yb my man I found a car for 70$ it has an engine can u FKING believe that
@petelattimer6808
2 жыл бұрын
sadly most Ladas ARENT that rust free underneath. we had them here in the UK for a while and they were the only thing (along with Skodas of the era) that rusted as fast, or faster than the 70s Fiats (which the lada is pretty much a reproduction of the Fiat 127 but with a locally sourced engine due to costs at the time)
@DjinnJuggler
2 жыл бұрын
@@petelattimer6808 I think the Russian domestic ones got a little better treatment than exports, but yeah, plenty of rotboxes around as well.
@pflaffik
2 жыл бұрын
Volvo 240, esp 1975 to 77 with the B20 pushrod engines. Volvo 140 was awesome too but those been too expensive the last 25 years. Volvo always were primitive like Lada but benefitted from their primitive nature, the bushings and other rubber parts were horrible though, wasnt rectified before 1978.
@allaraaver8432
5 жыл бұрын
It is amazing how well the bottom of the car has preserved itself considering how old it is! There is almost no rust at all! WOW
@UncleDon226
5 жыл бұрын
The prop shaft didn't blow out because of the load, it broke because of the imbalance. That's why it's recommended to get the driveshaft rebalanced when the u-joints are replaced. Once they start spinning and bowing out, there's no yoke on the planet that can withstand that kind of force. Great video, but to the commenters saying to slip the clutch; it wouldn't have saved it. Shock load didn't kill it, the rpm did.
@cjolney
5 жыл бұрын
They probably could've got away with adding carrier bearings to the shaft between the drive line and output shaft
@pflaffik
2 жыл бұрын
The lack of support made it blow, i knew it would before he tested it. I once lost a shaft support on a rwd volvo 240 going 90kmh, the banging and shaking was insane but nothing broke, new support rubber asnd bearing and the car was good as new. Imbalance will not harm unless you got one of those Alfa Romeo Alfetta with rear mounted gearbox/transaxle, those italian DOCH engines rev very high with the axle between engine and gearbox moving at crankshaft speed.
@dennisford2000
Жыл бұрын
I beat , pressed dozens of ujoints into drive shafts and never had any balance problems.
@LakeNipissing
5 жыл бұрын
That car was incredibly solid underneath, for its age!
@DadBodZaddy
4 жыл бұрын
IN RUSSIA YOU DON'T BREAK CAR. CAR BREAK YOU.
@diegoandalexcockatiel7540
4 жыл бұрын
The charm of da lada
@sethkrahn3155
4 жыл бұрын
Lada.
@TorchFpv
4 жыл бұрын
It's old? I thought that was only a few years old 😂🤣
@crudboy12
4 жыл бұрын
Ladas were not powerful or glamorous but they were tough.
@Ersciimusic
4 жыл бұрын
Me: Dad, i need an automatic car Dad: we have an automatic car Automatic car at home:
@nabeelahnel7825
5 жыл бұрын
Don't ever take your car to this guy when it's broken , he will flip it over and fix it 🤣😂
@awertyuiop8711
5 жыл бұрын
Indeed, he will fix it.
@NIGHTOWL-jf9zt
5 жыл бұрын
Most people flip houses, he flips cars :)
@jayc4721
4 жыл бұрын
Nabeelah Nel flipin hell. 🤣
@tahyabazim696
4 жыл бұрын
Dont have a sip
@r4pp44j4
5 жыл бұрын
koenigsegg direct drive made in russia
@bluspectre2042
5 жыл бұрын
You need an auto automatic for that to work
@csmith6583
5 жыл бұрын
Torque converter for sissy. Russia do the right way
@atayaksakal4875
5 жыл бұрын
Vennu McLaren P1 has only 1 gear too😂😂
@jsbehucbejizveish
5 жыл бұрын
Didn’t work tho
@rickyrick5586
5 жыл бұрын
We shall name it Koenigsegginoff
@naiwuuu
5 жыл бұрын
its not the rubber couplings fault.. prop shafts have to be perfectly balanced, and making it longer and adding more stuff to it is gonna throw it off balance and destroy itself ...
@thesillyhatday
5 жыл бұрын
The failure was the join to the original shaft. It needed a support bearing.
@Austinsairplanes
5 жыл бұрын
8:34 you can clearly see how imbalanced the driveline is, also on a 3 joint drive line, the front u joint (or coupling) has to be completely in line with the trans other wise there will be a massive amount of inbalance. the middle one and the rear will be able to cancel each other out. plus the trans mount was deleted allowing the motor to move up and down which puts unnecessary stress on the coupling and makes the inbalance worse.
@johngaltline9933
5 жыл бұрын
Probably also doesn't help that the schedule 40 pipe twists like a pretzel.
@iwantallthepizzaanduranium1627
5 жыл бұрын
Uhhh...yes a really good welder can weld a drive shaft together. It still needs to be balanced though. Even a stock one comes with weights because it’s been balanced. Yes they need to be balanced. Yes he should have used a clutch. Yes it broke for several reasons. Still it was a good video: we learned what won’t work. 👍
@lucasdJAdam
5 жыл бұрын
I think it had to much joints and not enough bearings to support it. The drive shaft just rolls up on itself instead of transferring power. Anyway, 4th gear ussualy is direct drive.
@billg7205
5 жыл бұрын
I basically did this with a 70 Mustang doing 70mph. The 4speed ran out of gear oil due to a rear seal leak. First gear is the fastest free spinning gear, which is why it welded itself to the output shaft in an instant, popping it out of 4th gear. Slowed down REAL FAST to about 35mph in no time as the 302 shot up to 7k rpm, and then the front u-joint broke on the parkway by the old J&L mills in Pittsburgh PA. Attempting to pole vault with the now dislodged drive shaft, it pulled the tailpipe clean over the rear end and wrapped it around the driveshaft. Best thing that happened was a traffic jam due to the Squirrel Hill tunnels at rush hour, so I was able to peel away the exhaust and change the u-joint (had a spare) on the side of the road with cars going slowly by. Started it up having to hold in the clutch to stop while in the slow moving traffic jam for about 1mile, before getting off at my exit. It was also quite loud with no muffler or tailpipe.
@PieManGood1
5 жыл бұрын
Basically could have done same thing starting off in 4th gear. Lol
@EatMyYeeties
5 жыл бұрын
Yeah right? I mean its 1:1 anyway lol
@dezeekat
5 жыл бұрын
i was waiting for them to tell us that but they didn't instead they destroyed perfect gearbox, did some shitty welding and couldn't even finish their own experiment..
@sorooshab
5 жыл бұрын
LOL, you don't get it, do you ? THERE IS NO CLUTCH, direct fly wheel to the tires
@diltzm
5 жыл бұрын
@@sorooshab Did you watch the video? He says many times he kept the clutch.
@Alexie3333
5 жыл бұрын
@@diltzm Hey did you notice he did drive on ice?
@avrahambrea1919
5 жыл бұрын
to get to the bottom of the car. normal ppl, put car on rack. russians. flip it on its side...
@pex_the_unalivedrunk6785
5 жыл бұрын
I wish i had 4 big Russian dudes in my garage... No not for THAT! perverts.
@ixionn563
5 жыл бұрын
@@pex_the_unalivedrunk6785 Lol I don't think anybody was going to imply that but now that you've said it, it seems extra fishy.
@Pulverrostmannen
5 жыл бұрын
The reason your shaft broke was not because of the rubber being weak but because of the big unbalance in the axle making it swing around so much it snaps. It could work to either way make a completely straight axle that is well balanced or use extra support bearings to keep it steady and you could rock with it I’m sure. But it was fun to see some parts flying anyway ;)
@antiochiaadtaurum3786
4 жыл бұрын
The underside of that glorious Lada looks like it has just rolled out of the factory. And the bois are about to make shit of it.
@loodzzenburger9197
5 жыл бұрын
Me: Damn bro, you don't have a lift. 54: Hold our vodka, we'll just lay your car on its side!
@peterrivney552
3 жыл бұрын
Well he won't need to buy a hoist so it saves you money...
@sujendrannairtheywaharen2230
3 жыл бұрын
Our car
@GrandTheftAidan
5 жыл бұрын
The underside of the lada looked in incredibly good condition lol
@zadeoooo
5 жыл бұрын
Thinking the same. Looked amazing
@mi16t
5 жыл бұрын
GrandTheftAidan agreed, way too clean, should of been restored
@GlamStacheessnostalgialounge
5 жыл бұрын
Ladas are incredibly resistant cars. People always bad-mouth them but in the end they're far better made than any mercedes or audi.
@HyperMAX9001
5 жыл бұрын
Maybe because it is only few years old
@GlamStacheessnostalgialounge
5 жыл бұрын
+Michael Skřepský That is a VAZ-2101, they stopped production in 1988, so no, it's not a few years old. The more modern 2100 series ended it's production in 2012, which is probably what you were thinking of.
@TRaySteeves
5 жыл бұрын
Replace the engine with a 3 phase electric motor and run the car with a 10,000 watt diesel generator in the trunk! I bet you get great fuel economy!!
@namm0x326
5 жыл бұрын
You'll be surprised how little 10 kilowatts is. That's only ~ 13.5 horsepower!!!
@TRaySteeves
5 жыл бұрын
@@namm0x326 I've done this with a 1500 watt gas generator and an electric lawnmower! I cost 1/3 of what it cost to mow the lawn with a 5 hp lawnmower!
@jusb1066
5 жыл бұрын
how much does a 10kw generator weigh?
@namm0x326
5 жыл бұрын
@@TRaySteeves Well, electric motors do have much better torque characteristics!
@namm0x326
5 жыл бұрын
@@jusb1066 About 300 pounds.
@tagltagl4870
4 жыл бұрын
This is the perfect "What if we try this..." channel. Keep it up folks.
@peterrivney552
3 жыл бұрын
These guys are great eh. Building a lata into a sprint race car...if you have time Chech out on KZitem sprint car racing they don't have transmissions, battery, or starter they push to start for racing really a wild ride. .
@charlespeagler8010
5 жыл бұрын
1. build a support for whats left of rear of transmission, as well as a support bearing behind the coupler (transmission side) 2. use the clutch to ease the engagement from stand still, dropping the rear when spinning will shock load the driveline and hurt it no matter what. 3. try heat treating the new fabricated prop shaft to make it less brittle
@stevenwithanS
5 жыл бұрын
That's just silly. Same as having it in high gear. 1:1. Why not put another gearbox backwards behind the stock one. See if you get super hyper overdrive. Go plaid.
@hamstirrer6882
5 жыл бұрын
So basically what we want is a collab between garage 54 and gear down for what? Imagine a 1,000,000:1 ratio, no way itd ever actually work, but itd be fun to watch!
@GRIFAbyte101
5 жыл бұрын
@@hamstirrer6882 I'm pretty sure it actually would work since the secondary box would be acting as an induction gear instead of a reduction gear, in the end all you need to make sure of is two things: 1: That there is a conversion box between the gearboxes for proper shaft rotation. 2: That the secondary box is in it's final gear to ensure proper operation of the primary gearbox and that when the primary box is in top gear to start going down in gears on the secondary box to increase overall speed.
@hamstirrer6882
5 жыл бұрын
GRIFAbyte101 true but that would take some serious engineering, both in design and manufacturing, to implement properly, which isnt the point of this channel. Good point though, i meant it hypothetically and basically as a joke
@integr8er66
5 жыл бұрын
@@rodarywindsorcleveland8506 its called split shifting and most big trucks have that already.
@Galf506
5 жыл бұрын
@@rodarywindsorcleveland8506 big rigs have that, check out some truck videos :)
@FelipeLuizDickmann
5 жыл бұрын
Awesome, it would be incredible to remove the suspension and springs, put some wood to fill the gap and drive around!
@jusb1066
5 жыл бұрын
that wouldnt be too much different unless you start hitting bumps
@FelipeLuizDickmann
5 жыл бұрын
Awesome. Some bad gravel road.
@mudemmeonick
5 жыл бұрын
Now you can start to imagine how incredible it is to operate on an human.
@white_mage
5 жыл бұрын
what?
@TR2000LT
5 жыл бұрын
Solder the wheels static onto the bottom and feel all the bumps...
@bleach_drink_me
2 жыл бұрын
The production quality and shop has improved in more recent videos but you'll have stuck to your roots. Thank you for not doing like a lot of others and drastically changing. Also want to thank the translator for his work. I wouldn't be able to properly enjoy these videos without you.
@brandonobaza8610
4 жыл бұрын
"Drive it onto the lift!" "Nah, I'll just roll it on its side
@jberry1982
5 жыл бұрын
it wasn't welded straight enough it needs to be balanced to hold together right I saw a wobble in the shaft from the start then when the rpms came up it self destructed really
@ottomotivevlogs1911
5 жыл бұрын
That's a Lada damage.. if you know what I mean Edit: I wasn't expecting that much attention lmao
@DancingTeapot
5 жыл бұрын
Should hit it few times and it will suddenly work again
@televisionandcheese
5 жыл бұрын
Hitting it on the back would have worked!
@Faxandu
5 жыл бұрын
Shut up Phil
@contra1124
5 жыл бұрын
@@tehgerbil you're correct they still produce new ladas (the company is now owned by Renault) but thats no reason to insult people...
@tehgerbil
5 жыл бұрын
@@contra1124 Ghosn affair could change that lol. Also contra was very fun.
@dylanbout2630
3 жыл бұрын
Sitting wondering about direct drive to crank . So I looked it up and this pops up. Love the videos !
@LabradorcumJuice
5 жыл бұрын
I'm in New Zealand I really appreciate your videos
@demphanbreman5998
5 жыл бұрын
I think it is the imbalance of the drive shaft that makes it fall apart. Just a single millimeter off can make the whole car vibrate and you can see the imbalance when he was recording under the car. 8:29
@armstrong4196
5 жыл бұрын
Same thoughts .
@TheUltarus
5 жыл бұрын
When you hear "ok, we're looking good" this shit is about to get real.
@Jake_Kern
4 жыл бұрын
This channel is phenomenal, a look inside the minds of my Russian counterparts. You guys are awesome!
@einzelmotorsport6711
5 жыл бұрын
100% broke because of inbalance
@julianowens7014
4 жыл бұрын
Einzel Motorsport yeah you could see it wobbling more and more right before it blows
@wyattearp4081
4 жыл бұрын
And incompetence lol think he lined it up with a grinder cutting disc LOL
@Mrmigo8703
5 жыл бұрын
Gearbox is for the weak.
@bonusnudges
5 жыл бұрын
BMI Russian is a fantastic voice over ! Makes great videos much better !
@Mishy11583
5 жыл бұрын
Drive with a wooden drive shaft
@Bolero6879
4 жыл бұрын
Already been done kzitem.info/news/bejne/raKd2YyckqBpl44
@suj241
5 жыл бұрын
I like your videos even before it starts playing. Great content.
@mattrockman1028
5 жыл бұрын
you turned a car into a fixie... dang hipsters
@superchargedadventures
5 жыл бұрын
LMAO!!!
@xeonit
5 жыл бұрын
Its all because of the immbalance of shaft. You can see that in 9:46
@keenanleetodd
5 жыл бұрын
Yes or lack of a carrier bearing
@saif1002
5 жыл бұрын
And the gear box mounting was deleted
@butchcassidy3373
Жыл бұрын
Direct drive works great. Sprint cars been doing it for years. Push start that baby and you're off. For years high gear was one to one anyway. Now we have over drive. Great video as always
@crackedemerald4930
5 жыл бұрын
This feels like some really weird retro-futuristic cable TV program and i fucking love it
@russfulford3684
5 жыл бұрын
You guys are truly nuts
@loganmetcalfe6505
5 жыл бұрын
This channel is my favorite
@KK19825
5 жыл бұрын
These guys have more and better tools than a big sawmill in Russia. I'm not even kidding. I've seen these guys use a MIG-welder and a ratchet set. Never EVER have I seen either of those in a Russian sawmill. Just so you know, I work as a mechanic for a big sawmill machinery manufacturer, making a lot of maintenance calls around the world.
@KillSwitchNY
5 жыл бұрын
This man is an automotive hero.
@cdoublejj
5 жыл бұрын
the rubber coupling didn't exploded until it started flexing due to lack of carrier bearing at the end of the extension where the back of the transmission housing would have been
@davidlewis3253
5 жыл бұрын
We do this in the USA it's called out law racing
@thebadger5391
4 жыл бұрын
You mean sprint car. Outlaw is top league of sprint cars
@DILLIGAF2101
4 жыл бұрын
Sprints and Midgets are directly-driven.
@peterrivney552
3 жыл бұрын
@@DILLIGAF2101there is a shifter to put it either in or out of gear so when there working on it or bringing it to the track before starting the rear is disengage but when racing the engage it then push start the car kinda like a clutch
@DILLIGAF2101
3 жыл бұрын
@@peterrivney552 right, but directly-driven in my context meant no gearbox. I know about the in/out box.
@genielaroche9134
5 жыл бұрын
I have a great day when I have watched your show!...thank you from Vancouver Island ,Canada
@DJTAZ1996
5 жыл бұрын
You sound like a great guy to be around. Love your videos! Keep up the good work brother
@JnixMarshel
5 жыл бұрын
I thought he was going to use the clutch ? If he slipped the clutch I bet it would have worked better.
@oxidizedolive
5 жыл бұрын
I don’t think so. It would either destroy the clutch (almost at impact with the plates) or it would have sheared through the valvetrain and/or the drive shafts.
@Zchef85
5 жыл бұрын
Save yourself a lot of work and put it in 4th gear
@mcplutt
5 жыл бұрын
Would have been a lot easier yes.
@hotcroc2856
5 жыл бұрын
That's what I thought
@erikhendrych190
5 жыл бұрын
And if you push start that is exactly what you are supposed to do. (I mean you are not supposed to push start a modern car but for that old Lada it should be fine.)
@zanastumasonis
5 жыл бұрын
why 4th exactly? how do you know?
@splewy
5 жыл бұрын
Žanas Tumasonis 4th gear is a 1:1 gear ratio on most cars. The only exceptions would be a 3 or 4 speed where 3rd is 1:1. Or one of the newer 8-10 speed transmissions where either 5th, 6th or 7th is 1:1.
@mydailyruteen
5 жыл бұрын
Can’t wait to try this on my hellcat
@peterrivney552
3 жыл бұрын
What roll it on it side ? That would be great to see post it on you tube ok
@waynegeordiesdad648
5 жыл бұрын
You guys are crazy as a box of squirrels!!!!....crazier than CANADIANS......and that's a good thing....I love it and I subscribed...you do stuff we ALL want to do....but we just DREAM most of it....you DO IT Cheers from Canada North
@bobbertthebuilder4856
5 жыл бұрын
Im thinkin the same thing jelly bean
@FUCK_________googIe
4 жыл бұрын
exactly, how crazy is a box of squirrels?
@donbradley3259
5 жыл бұрын
most peopl e wont put in 1/4. of the amount of work these guys put in to their. vids...shits supper funny..love it kepp up the good work and thanks..
@naseerp313
5 жыл бұрын
all your videos are awesome my friend .i used to watch all
@JamesSiggins
5 жыл бұрын
Love this channel. Quality viewing.
@Graff-zr3tn
4 жыл бұрын
These guys will try anything once. Or twice. Good job.plz keep going!!
@TheNick9910
5 жыл бұрын
It's not the rubber coupling, it's the extension not being wide enough to handle the torque. P.S. I'm a mechanical engineer
@trevordoherty8343
5 жыл бұрын
Its the unbalanced drive shaft
@joker4206987
5 жыл бұрын
That was so balanced did u see that weld 🤣 wide enough to handle the torque my axle shafts thinner..... I hate engineers.... Can I kick you in the nuts?
@TheNick9910
5 жыл бұрын
@@joker4206987 bruh wtf
@mattwebster675
5 жыл бұрын
Yes I agree with you an extra thick peace of pipe and also an extra bearing and carrier.
@jeffdawson7841
5 жыл бұрын
Engineers lmao
@ophiasdzamara88
5 жыл бұрын
Me: Ok I'll get the jack and the stands. Dudes: 😏 whats that???
@democracyforall
5 жыл бұрын
The gearbox is there to remove the excess energy so the shaft will not break. That is why the shaft is breaking and bending because there is no gearbox. When we start the car and change gears the purpose is just one simple purpose to protect the shaft from breaking because of excess energy and the gearbox is the only way to do it. He should have studied the purpose of the gear before trying a new theory.
@janstrnisa4702
5 жыл бұрын
@@democracyforall you misunderstood the joke
@sahilgopal3008
4 жыл бұрын
Hey you guys are awesome. Stuff being done only to realise that these things were only a thought or curiosity. Thank you so much for the vids👍
@Wip3ou7
5 жыл бұрын
this guy is the most hardcore car mechanic in the world
@MadMax-yq9ix
5 жыл бұрын
Dangerous stuff boys be careful, safety is number one priority.
@Mirage2000H
5 жыл бұрын
In Russia things work differently. If you disregard safety completely, no worries. Only when you pay attention to safety do you get hurt.
@MadMax-yq9ix
5 жыл бұрын
@@Mirage2000H say that to that one Russian dude forgot his name has I was gonna say it lol.
@normhiscock352
4 жыл бұрын
I just found this channel and I love it.
@lucywucyyy
4 жыл бұрын
wow that shot of the drive shaft exploding was perfect
@Demonslayer20111
5 жыл бұрын
What was the point of the clutch if you aren't gonna use it lol
@lawrencegoralski3029
5 жыл бұрын
Demonslayer20111 to be able to start the car
@erikj.2066
5 жыл бұрын
With the wheels up on a jack, the car would start just fine without the clutch.
@lawrencegoralski3029
5 жыл бұрын
Erik J. True, but that'd be inconvenient
@9morrical
5 жыл бұрын
He didn't even use the clutch to start he just reached in through the window and started it with the clutch engaged...
@Demonslayer20111
5 жыл бұрын
@@lawrencegoralski3029 he started it on a jack. No point in having the clutch.
@xXWOND3RBR3ADXx
5 жыл бұрын
“We didn’t think this one through” oh?
@planetina1145
4 жыл бұрын
You don’t see a American or any other channel like this, Russians are unique and this stuff would be illegal other areas lol best mechanic channel ever even if they can’t speak English or etc they are still an awesome group of Russians!
@omoyomoyo6986
4 жыл бұрын
Best language translator in the world !
@superbarnie
5 жыл бұрын
Hahaha, who needs a lift when you can just roll the car over on its side?
@rwbimbie5854
5 жыл бұрын
Hydraulic jack? Screw jack? NOPE! Get 4 guys to just lift the car onto its side
@redbluesome2829
5 жыл бұрын
*The voiceover reminds of that hilarious old show, MXC (Most Extreme Elimination Challenge).*
@phillipbartlett1819
4 жыл бұрын
I miss that show
@TheThirdWheel618
5 жыл бұрын
Thank you for doing all these crazy things to entertain people all over the world ...like your videos......
@gingerbreadmancbc
5 жыл бұрын
You are a great mechanic.
@mwbgaming28
5 жыл бұрын
you forgot to balance it the shaft gave out because of imbalance
@mwbgaming28
5 жыл бұрын
@Brian Woodrow the imbalance creates excessive load the faster the shaft spins
@jasonstalder5208
5 жыл бұрын
@@mwbgaming28 correct however it let go at a low rpm, thus less effect of the unbalancing = massive load. try taking off in a high gear and see what happens to a shaft unmodified
@IlianNachev
5 жыл бұрын
@@jasonstalder5208, What would happen to the shaft?
@eddiebolen9
5 жыл бұрын
Wanna see someone put oil in a running car all the way up to valve covers or till it stops from to much oil
@axelthesergal1997
5 жыл бұрын
Link meh
@eddiebolen9
5 жыл бұрын
@Lassi Kinnunen where I haven't seen it
@cjolney
5 жыл бұрын
Mighty car mods did it with their corolla
@blacknessiah13
4 жыл бұрын
My new favorite channel! Very interesting to see these fun experiments!
@jacobd7134
4 жыл бұрын
Keep up the good work! thanks guys for trying this crazy stuff out!
@2wheelsoffroad730
5 жыл бұрын
Id recommend making a cheap driveshaft safety loop out of some leftover scrap for part 2 so you dont lose a leg or any thing 😳
@RoadRunnerMeep
5 жыл бұрын
Amazing channel, your first video I watched was the magnetic suspension, it's full of tech and creativity, keep it up :)
@SilentGamingBay
5 жыл бұрын
It took me 6 minutes to realize the car isint on a lift but on its side. That's creative
@thatautogarage3644
2 жыл бұрын
I love that it's natural for them to think "It's time to work on the car, lets flip the car over to get the transmission out".
@spdwebdotnet
5 жыл бұрын
If you left the clutch in place.... why didn't you use the clutch by slipping it to load the driveshaft up slowly? Would burn through the clutch quite quickly but would give you more than a few starts before it went. Same as starting in 4th, or whatever the 1:1 ratio of the transmission is. I've successfully started in over drive before by slipping the clutch a ton. Just for fun!
@nkn8820
5 жыл бұрын
I think it was so out of balance at high rev it just snapped
@Scott-mc3fv
5 жыл бұрын
lmao whoever put that mr carmack in at 2:00 thank u lol
@matejmazur191
4 жыл бұрын
I enjoy the show. Thanks!
@dixonfamily9820
5 жыл бұрын
You always make good videos and it looks like lots of fun.
@siraff4461
5 жыл бұрын
All this does is run it at a 1:1 ratio. That's the same as 4th or 5th gear in most cars.
@un_civilized
5 жыл бұрын
I was hoping we would see if there would be a difference with the power losses through the drive train. They should have done a before and after on a dyno
@siraff4461
5 жыл бұрын
@@un_civilized Well in theory it should gain a little over other ratio's but if tested against the 1:1 equivalent gear there will be almost no difference. This is why dyno tuners try to do the runs in a 1:1 if possible. More difference in the ratio means more mechanical losses in the gearbox.
@siraff4461
5 жыл бұрын
@PingasTheFourth In what?
@siraff4461
5 жыл бұрын
@TomOfTurmiola Even these days 4th is usually a 1:1 with the rest being overdrives. Some of the 8-9spd boxes are different but for the most part it's still the same. I remember when the Ford Sierra and Vauxhall Cavalier came with a 5 speed for the first time and everyone suddenly wanted one.
@Zamsky39
5 жыл бұрын
no, 4th is not 1:1, you forget about the final drive that is in the range of 3-4.5:1
@gameexe6337
5 жыл бұрын
if you left the clutch in, why didnt you use it?
@schr4nz
5 жыл бұрын
I wondered the same thing...
@connorbunch3577
5 жыл бұрын
My thoughts exactly
@superchargedadventures
5 жыл бұрын
Seriously!!!
@briankennedy5578
4 жыл бұрын
This is pretty much what they do here in the states with dirt track midget cars. There is a splined shaft off the flywheel. A lever connects another spline to the drive shaft. So you have engaged and disengaged. You engage it, then you are pushed to start engine. Then when it's time to stop, you pull lever. They are small and light weight with v8. Very fast and crash alot. There is a big "wing" on top to keep them from flipping over in the corners.
@BlueAustinMaxi
5 жыл бұрын
My small racing atv is direct drive but it has never done that and it doesn’t even have a clutch so this actually surprised me
@HighExplosiveSerenade
5 жыл бұрын
3:36 WOW! Look at that welding mask!
@dustinmiller7278
5 жыл бұрын
Direct drive =4th gear
@Blackwolf-ex4re
5 жыл бұрын
@@geoffmerritt True but he's right
@Zamsky39
5 жыл бұрын
no its not, because of the final drive, closer to 3.5:1
@kencohagen4967
4 жыл бұрын
We all crazy, and you're crazy enough to do what we want to see. The cool part, I'm learning a lot Russian cars.and on your prop driven air car, the load bearing you built was done expertly! So, your not just crazy, your talented as well!
@nickcrane8329
4 жыл бұрын
I started laughing my ass off at "it's all quite simple." Car just sitting on its side
@astermay5757
5 жыл бұрын
Like the magnet suspention but it keeps you from hitting another car
Пікірлер: 2,2 М.