I bought a cheap mag drill so that I could drill larger holes in sheets and plates that were too big to fit in the large drill. That didn't work out as well as I had hoped, you can see the playlist of that saga at • MD-40 Mag Drill - Part...
Since then I have realised how much drilling I do that could easily be done with an annular cutter in my drill press. These are jobs that are too small to fit the mag drill on and difficult to set up elsewhere. The drill press is designed for these jobs so I figured I should find a way to use it.
My initial thought was to turn a Morse taper on the lathe and drill the other end to take the Weldon shank. Nothing fancy, just a proof of concept tool. Before I started turning metal I had a quick look on EBay to see if there was anything already available. Not surprisingly there were several choices available. I decided to get one of the cheapest ones to test.
The drill press has plenty of torque and runs down to low RPM so it should be ideally suites to using annular cutters. I'm have done a video of it in action so you can see for yourselves.
The complete playlist of all my tool review videos can be found at: • ICut60 Day 1: 60Amp Ch...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
You can find one for yourself at these links:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► Weldon to Morse Taper on EBay AU: goo.gl/1p9uqv
► Weldon to Morse Taper on EBay CA: goo.gl/WyfnVY
► Weldon to Morse Taper on EBay UK: goo.gl/Lt1BFR
► Weldon to Morse Taper on EBay US: goo.gl/Fmw1Tx
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Follow Designed 2 Build on:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► Website: www.designed-2-...
► Facebook: / designed2build
► Twitter: / designed2build
► Google+: goo.gl/nXyFXA
Негізгі бет Weldon to Morse Taper Adaptor
No video
Пікірлер: 5