Supervisors jaw dropped in an interview when I told him I was a "KZitem mechanic", he had been an instructor at WyoTech... I learn at an alarming rate using KZitem... way more helpful than my fancy college degree. Thanks Troy !!!
@RanchFairy
2 жыл бұрын
It’s amazing how much info is out there
@CharlesHenegar
Жыл бұрын
Troy I have a 2022 GMC Canyon WT Elevation series crew cab I also purchased Wet Okole front bucket seat covers. My biggest problem was routing the straps that hold the seat bottom cover left to right. The front to back straps were not a problem. I solved the left to right or side to side issue by using a 12-14 inch zip tie through the buckle on the door side strap. it's strong but flexible and can be maneuvered under or around seat framing or wire bundles. Once I had the strap routed properly I just slid the zip tie back out of the buckle made the connection and tightened.
@MrBowNaxe
2 жыл бұрын
Good stuff Troy! Always learn something watching other people finding all the trouble spots. Thanks for sharing.
@northernmonkey4632
2 жыл бұрын
Glad to see the new truck! You will be so happy with it! I have an ‘08 Tundra and has given me no issues! Looks sharp sir!!!
@KanakaUso96792
10 ай бұрын
Wet okole a Hawaii product thank you for your review 🤙🏽
@tannerhinds2321
2 жыл бұрын
Troy, I don't know if you did this for the headrest holes but cutting an "X" over the receiving hardware slightly smaller than the hardware itself made it super easy to finagle it under the hardware. Again I don't know if you did that and with those type of seat covers you'll probably never have to do it again haha! Thanks for the content
@RanchFairy
2 жыл бұрын
I didn’t but maybe I should have
@xarcher1
2 жыл бұрын
On my F350, there was literally no hand room under the electric drivers seat to thread all the straps thru the gear. I actually ended up unbolting the seat, pulled it out and set it up on a work table.
@RanchFairy
2 жыл бұрын
Oh MY! Wow
@laurabuzianis219
2 жыл бұрын
Thank you! Aloha
@michaelharriman2794
2 жыл бұрын
I've done it before on my older Ford trucks is it too much work to get the seats out of your Dodge the two front bucket seats on my F350 came out fairly simple made it a lot easier just a thought
@Kurtdog63
2 жыл бұрын
My experience with seat covers is that after using them for a while, they start changing geography. Hopefully this kind will stay in place. Look nice.
@RanchFairy
2 жыл бұрын
That’s my hope and that’s my experience
@michaelharriman2794
2 жыл бұрын
Oh my bad I'm old and my hearing is not that good I thought you said quad I was thinking of the four-door Dodge
@chamisi
4 ай бұрын
so I put wet okole's in my land cruiser and seemed easy but in my tacoma I did unhook the coin catcher part on the back side of the seat back do I leave it folded up ? when I put the wet okole seat back on ?
@RanchFairy
4 ай бұрын
Yes
@davidstokes925
Жыл бұрын
From the short glance I got, did your front seats not have plastic parts around the bottom sides? Thanks for the vid!
Пікірлер: 22