Mounted my 70” and it hangs over maybe 2” each side and very sturdy! 70” fits great listen to the manufacturer
@SheOnPurpose
2 жыл бұрын
Great job!!! Thanks so much!!! I have a 65 inch and I was thinking about this one but I don’t want mine to overlap…. So thanks so much for the attention to detail in the explanation 👍🏽👍🏽👍🏽👍🏽👍🏽 God bless!! I’m here on Thanksgiving 2021 🍁🍁🍁
@jace15076
3 жыл бұрын
For those wondering, this stand is 50" wide. A 58" Samsung is 51" wide. You can mount up to a 55" Samsung without overlap. This is the best stand you can buy for $149.
@ozzieperez
2 жыл бұрын
Would a 60” TV be the perfect edge to edge fit? Or is the 55” the perfect fit to not overlap?
@truexreclaimer
3 жыл бұрын
Thanks for an honest and straightforward review! Going to buy this for my 55' Samsung
@diannewashington7517
3 жыл бұрын
I just received mine today. Thank you much for the video, awesome job!!!!!!!!!!!
@DarthVader964
Жыл бұрын
How did you get the suction cups on? They're terribly hard to put in. I put in some with a lighter but it's not working well
@MRSEEK100
Жыл бұрын
@@DarthVader964 I know it's probably too late now, but I saw someone using a little bit of soap to slide them in easier
@Stormmaniac
8 ай бұрын
Mine came but the middle shelf don't fit bolts properly did you have this issue? I had to buy a drill to make them fit..
@phillipmedina9877
Жыл бұрын
Kinda nervous to let it lean forward without it being attached to a wall, I have a 65 in, any suggestions?
@charlotteespenido-pledger6334
3 жыл бұрын
What screw did u use to mount the tv
@lowk518
2 жыл бұрын
will this fit with a 32 inch tv? before i go out and buy a bigger tv just for this stand i want to make sure if i can just keep my 32 inch.
@jessicafletcher6962
3 жыл бұрын
What size bolts did you use for the brackets at the back of the tv? I’m having trouble mounting mine in the spine
@PassportBrosBusinessClass
3 жыл бұрын
Everything I used came in the package. I think I tested 2 sets till I came up with the right size.
@vernebaptiste6040
9 ай бұрын
Good evening Sir....Do you have any video showing where you attached the two wooden end to the metal frame?
@prxncevino8226
3 жыл бұрын
Does it lift the TV up and down?
@sarahskies3568
3 ай бұрын
Getting mine on monday, can't wait to get it!
@davidc3833
2 жыл бұрын
I have a 65" I just purchased this tv stand! Only problem is! It's still in the box 😆 wish I could just pay to set it up lol
@sniperghostshooter7161
2 жыл бұрын
Lol same
@angeljackson6475
3 ай бұрын
I know this is 2 years later but we’re you able to get it mounted. I’m having that same issue now
@y2k_cage8
Жыл бұрын
I have no clue if you will respond but did you have to put in the black fittings inside the tv? Or no? Because I have my 65” but the spacers that’s supposed to go inside out to big so wondering if you used them or just screwed in the bolt that fits
@PassportBrosBusinessClass
Жыл бұрын
Different TV have different fitting requirements.
@crimsonguardian341
2 жыл бұрын
But how would you take off the angle bars if you want to change out your TV? Please help ?
@joanimal_1
6 ай бұрын
Mine won’t tilt! How did you get yours to TILT? Mine will swivel but won’t tilt. Even when I loosen the twist knobs. Won’t tilt
@Confidential619
3 жыл бұрын
2:08 good to know, because I wasn't sure if my particular tv would fit on that so incase it doesn't I'll just not use that.
@shaydog9482
3 жыл бұрын
Thanks I was lost tell I seen this got it all ❤ together
@shatterst0rm380
3 жыл бұрын
Thanks for doing this!
@XxJuNiOrxX714
3 жыл бұрын
Just finished assembling mine. It’s a really sturdy stand. I was really skeptical of how it would hold my 65” but it worked out well. Had a bit of trouble setting up the mounts to the tv since there aren’t really any videos specifying on how to do it plus the instructions aren’t really clear for that part. Overall it’s a really nice stand. Very satisfied. Just hope I assembled and mounted it correctly. Hopefully there aren’t any complications in the near future 😅
@RealestKhalil
3 жыл бұрын
How did you get the spine to stand up straight & not leaning? Mine spine arrived yesterday & was confused why it was leaning forward & the bottom part is tight.
@XxJuNiOrxX714
3 жыл бұрын
@@RealestKhalil just make sure everything is facing in the right direction, when I thought I had finished assembling mine I double checked everything and I still had to take a few things apart to make them face how they were supposed to. The spine was straight and sturdy when it was assembled I didn’t have any problems with it, if it is leaning im not sure why but like I said just double check everything and also make sure you add and tighten the hardware exactly how it is supposed to.
@RealestKhalil
3 жыл бұрын
@@XxJuNiOrxX714 wish I could take a pic & post it on here
@ronaldhernandez6065
3 жыл бұрын
@@RealestKhalil hey man did you find a solution to the leaning part just set mine up and having the same problem I have a 65 inch tv too and I’m having the leaning problem of the tv as well
@Avazquez92
2 жыл бұрын
@@ronaldhernandez6065 I’m having this same issue I had to redo it just in case I did something wrong but the spine still leaned forward
@LB-lx8iq
3 жыл бұрын
Can you put a gaming monitor aoc 34 in g2 series on that mount?
@Steviewonderwhy
Жыл бұрын
Did you use a restraint strap on tv? To prevent tip over? I don’t feel like using mine
@PassportBrosBusinessClass
Жыл бұрын
The TV, as you can see sits away from the wall. a Restraint isn't necessary and we've had NO issues.
@CRE8LSM
3 жыл бұрын
does anyone know where I would get a replacement for the wall mount? all the wall mounts online are only for well... walls. cannot find any that wrap around the pole of the tv stand... I really need one
@boico123
3 жыл бұрын
How many inch tv you put on?? Is fit good
@jamescole1234
6 ай бұрын
Think u sir just got my today it looks awesome can wait to get together for my 58 in tv
@sheilawhite7894
3 жыл бұрын
Thankyou you are a big help.
@strasburgboy
Жыл бұрын
Thank you very much!! Great video!
@adriw9835
3 жыл бұрын
LOVED this review!! thank you!!
@Diana-uk8ql
2 жыл бұрын
Good on you getting it set up Mines was just not working. The middle shelf was way off. Had to return. :(
@supermanx8711
2 жыл бұрын
That was because which of the 3 holes you use depends on which height of the middle shelf you chose to place it.
@kingeleven3820
Жыл бұрын
Can this hold a 60 lbs tv with the tv mount?
@philiplopez4383
2 жыл бұрын
I just got this a few days ago and when I tried setting up the middle part one of the screws wouldn't go in all the way even though it was the right one
@adejohn1937
3 жыл бұрын
Hi do you think he can hold 70 inch TV?
@donnellgaither5189
3 жыл бұрын
Good morning how do you get the bar to line up
@ms.bonillas1125
3 жыл бұрын
The only part I'm struggling with is mounting the bracket to the TV helllppp
@Unkn0wn450
3 жыл бұрын
Thank you for this video! Very informative. I know this was posted couple months ago but if you see this.. Do you know the true dimensions? I plan to buy this but I want to make sure the height is tall enough and the width is wide enough for my needs.
@akyawilk11
Жыл бұрын
Is the spine supposed to lean forward? I don’t know 🤷🏾♀️ if mine is put together correctly bc the spine leans forward a bit.
@PassportBrosBusinessClass
Жыл бұрын
No
@californiamade5608
3 жыл бұрын
What do we do if we don’t have the washers
@iZack187
3 жыл бұрын
The television looks pretty close to the top shelf... Is it possible to raise the TV even higher than that? I would assume a 65-70" TV would be larger in height
@dbssanchez11
3 жыл бұрын
yeah there are 4 mounting options for the height of the television, it looks like he has his on the lowest setting. I have my 55 inch on the second lowest setting and it fits a center channel speaker underneath it without issue. Source: I just set up mine.
@BIGB347
Жыл бұрын
I recently bought this same stand last Saturday but in the "ash wood" finish it's a beast and sexy sleek and elegant in my place. surprising how light it is to move it around with ease. I didn't have exact screw driver you used in this video took me a 2 hours and 20 minutes alone to assemble it
@DarthVader964
Жыл бұрын
How did you get the suction cups on? They're terribly hard to put in. I put in some with a lighter but it's not working well
@BIGB347
Жыл бұрын
@@DarthVader964 there not difficult to pop em onto the slots press and hold each one until slide into shelf frame. It’s a bit of a workout popping them onto each shelf for placing each glass shelf
@shahedimawal9365
Жыл бұрын
Please can you help how to hang it up
@BIGB347
Жыл бұрын
@@shahedimawal9365 floating spine mount?
@shahedimawal9365
Жыл бұрын
Yes sir
@DarthVader964
Жыл бұрын
How did you put the suction cups in on the bars? It's literally impossible without melting the suction cups with a lighter
@PassportBrosBusinessClass
Жыл бұрын
I pinched em. Didn't have a problem.
@humbertogutierrez9300
3 жыл бұрын
Does this work on a 43 inch tv
@ARMY14jm
3 жыл бұрын
How long did it take to get it fully set up?
@PassportBrosBusinessClass
Жыл бұрын
1 hour
@destressfrlyf843
8 ай бұрын
This was absolutely handy
@NICKMICKGames
2 жыл бұрын
I'm having issues with screwing in the bottom part of the bracket pieces LR&LL on the back of my 50 inch tv. Are the spacers supposed to fit into the hole? The spacers I received don't fit into the hole.
@misspink54321
9 күн бұрын
I’m super late to the party, but did you ever figure this out? Having the same issue right now.
@desarae4128
3 жыл бұрын
how do you tilt the tv forward? my stand isn’t tilting
@PassportBrosBusinessClass
3 жыл бұрын
loosen the tilt lever.
@IgnorantPrince
3 жыл бұрын
My dude sounds like Keith Lee from WWE! Lol but good stuff bro..imma set mine up tonight
@Hsw_wrestling
3 жыл бұрын
Bask in his glory!
@jeffhardybaybay2761
3 жыл бұрын
Yo he kinde does
@user-dr5pe7gx9b
8 ай бұрын
I had to remove tv because I moved. How do I put it back on.
@brandoncox494
3 жыл бұрын
What did u use to screw the monitor brackets on
@PassportBrosBusinessClass
3 жыл бұрын
Brandon Cox I think I just used my torque screwdriver
@leahdavis9133
2 жыл бұрын
I have the same model assembled myself struggling with a tilt issue tv falls forward …
@weatherphobia
2 жыл бұрын
We had this same design and one night at 3 AM we heard a sound like a cinder block dropped from 10 feet to the hardwood floor. When we looked, it was our LCD TV 36" laying face down onto the hardwood floor. The top glass shelf did not crack or break, but the metal brackets and sections gave way. It's not repairable, I tried, so we decided no more glass TV stands and no more TV stand type device for more than $150-$199.99. YMMV
@PassportBrosBusinessClass
2 жыл бұрын
You must’ve made some kind of mistake building it. My mothers stand is still going strong since I made this video building it.
@kingeleven3820
Жыл бұрын
How much did your tv weight? Im thinking about getting one these for my 55 tv but it weights 60 lbs im afraid in the long run the glass will break or the tube holding all weight will break the glass from all the pressure
@weatherphobia
Жыл бұрын
@@kingeleven3820 Mine weighed 23 pounds.
@weatherphobia
Жыл бұрын
FORGOT TO ADD: Even during/after the shelf collapse, not a single piece of glass from any shelf broke. I found that to be impossible, but it was true. The metal parts failed.
@Itscjayjames
Жыл бұрын
My tv keeps leaning forward which I don’t like. Any help?
@FIGHTINGGAMER
Жыл бұрын
Does anyone know if you can remove middle shelf I need more room
@PassportBrosBusinessClass
Жыл бұрын
No
@victoriapennington1661
2 жыл бұрын
My problem is HOW to get the bottom screw in the brackets on TV. The hook covers the bottom hole for screw.Help!!!
@jaymenplan4677
9 ай бұрын
How did you guys figure out what size screws to use for the brackets?
@PassportBrosBusinessClass
3 ай бұрын
trial and error
@RealestKhalil
3 жыл бұрын
I brought mine yesterday for some reason the spine part keeps leaning forward I dont know you gotten it to stand up straight
@PassportBrosBusinessClass
3 жыл бұрын
That shouldn't happen. Are you sure you tightened it correctly?
@RealestKhalil
3 жыл бұрын
@@PassportBrosBusinessClass I'm pretty sure I did I spent all day yesterday trying to make the spine straight only thing it does just leans forward.
@Diana-uk8ql
2 жыл бұрын
Oh so it’s not just mines that does that. Ended up just taking it apart and requested a refund and return.
@joshlayman7217
Жыл бұрын
I bought a 50 inch 4k Vizio Smart Cast tv at Walmart and the only tv stands they have is this one.
@gftgrtrtyrty
2 жыл бұрын
Does this set up tilt from left to right?
@PassportBrosBusinessClass
2 жыл бұрын
yes
@AlbireoOkami
3 жыл бұрын
What Vesa standards does this stand work with? I can't find this info anywhere.
@PassportBrosBusinessClass
3 жыл бұрын
It’s pretty much universal.
@AlbireoOkami
3 жыл бұрын
@@PassportBrosBusinessClass any way you can confirm i can mount a 200 x 200 vesa standard? I'm worried there is not enough gap to mount the TV center. About 6.5 inches between mounting bars
@kevoggtm9162
4 жыл бұрын
where can i get the brackets i be tryin to find them for so long
@Redsfreak19
3 жыл бұрын
They're in a box within the box. My swivel joint was taped to the outside of the box.
@simmikaur1800
Жыл бұрын
Can you tell me how to fix tv position up to down and down to up. My daughter changed the position. My tv is all the way down . I don’t know how to fix it
@JC-bl9bo
3 жыл бұрын
Hello I just watched your video, very informative. Even though I'm buying a 75 inch TV I think this will for the bill. The legs are only 25.9 inches apart. And it only weighs 79 pounds. I know it will overlap the sides but I'm ok with that. What do you think?
@PassportBrosBusinessClass
3 жыл бұрын
I don’t want too much overlap
@JC-bl9bo
3 жыл бұрын
@@PassportBrosBusinessClass Thanks for the reply. I would be ok with the overhang. How easy or hard was it to put together? I am not the best at building stuff but it looked somewhat easy to install. Thanks again for the reply.
@shekilrose1077
2 жыл бұрын
@@PassportBrosBusinessClass Whalen is a good tv stand for 65 inch tv or 50 inch TVs or 55 inch TVs I have two 65 inch TVs
@lalow8949
Жыл бұрын
I just got a 75 inch tv but im having an issue with the tv tilting forward, is it to heavy? Did you have this issue
@JC-bl9bo
Жыл бұрын
@@lalow8949 no, i did not have an issue with the TV leaning forward. What TV is this?
@marquesterry3585
3 жыл бұрын
I have no idea which screw to use to place on the back my TV to mount to the stand. Confused is not even the word lol
@Man0War_Loki
Жыл бұрын
Ok needed to see how much gap the tv was from the glass.. I have this stand but got a larger tv. I'll have to find a workaround. Like the stand too much to get another one
@KarystusTV
3 жыл бұрын
What size is your tv
@shekilrose1077
2 жыл бұрын
I have this exact tv stand you can adjust the tv stand too extend too come out some more I have a 65 inch tv
@MoxOpal86
Жыл бұрын
I have a 65 inch on it an it does overlap a little but still looks amazing
@PassportBrosBusinessClass
Жыл бұрын
Because of the black bezels, it’s acceptable I think.
@MoxOpal86
Жыл бұрын
@@PassportBrosBusinessClass maybe but the overlapping really isn’t an issue at all the tv sits pretty far back on the stand so it almost looks mounted to the wall so the overlap isn’t really an issue the issue is the sturdiness of a stand that’s the only thing that needs to be looked at first wich this stand is very sturdy
@DarthVader964
Жыл бұрын
How did you get the suction cups on? They're terribly hard to put in. I put in some with a lighter but it's not working well
@MoxOpal86
Жыл бұрын
@@DarthVader964 some of them were easy but some were a pain but i got out a little screwdriver and kinda went around the part you push in the hole and pushed them in and worked just fine
@ChrisM0D
3 жыл бұрын
Do you know if this can support a 65in Curve TV??
@Redsfreak19
3 жыл бұрын
The instructions say that it can. Slightly different bracketing procedures though.
@mmartinez3619
4 жыл бұрын
Good vid, thank you
@makavelithedon2369
3 жыл бұрын
Hello, My tv keeps tilting. Any suggestions?
@PassportBrosBusinessClass
3 жыл бұрын
Tighten the swivel
@johnnyseales8883
3 жыл бұрын
You got that straight
@skurgeI
3 жыл бұрын
What are the measurements?
@ifye2412
3 жыл бұрын
Went out n got the same exact one
@mahoganywalker5122
2 жыл бұрын
Dude I feel so cheated i paid 180 but it was worth it thanks for the vid
@7HEREALDON
Жыл бұрын
Can you move and swivel the tv with the built in stand?
@PassportBrosBusinessClass
Жыл бұрын
You can change the TV angle by untightening bolts.
@truthtimetv4575
3 жыл бұрын
Sounds like a sketch on key and peele. One of peele voices little bit lol
@rosrose6014
3 жыл бұрын
Like ya video good one man
@Phoenix-Rising4
3 жыл бұрын
I had my 55 in on it but upgraded to a 65 in,so I excited and scared to put it on there 🤣🤣 but why did you skip the part the part where you put the bracket on the tv?
@brandenwatkins1988
3 жыл бұрын
Did you mount it on the wall or stand?
@GetSocialButterfly
4 жыл бұрын
First started watching this review I was kind of skeptical. I definitely have to say, that is the most beautiful tv stand that I have ever seen.
@PassportBrosBusinessClass
4 жыл бұрын
If everything goes well, I may do another one with an 80" TV and stand.
@GetSocialButterfly
4 жыл бұрын
Great can’t wait to see the review on that one. Governor just said no more elective surgeries in Harris County Texas because of big spike in C-19 cases. They are starting to shut it all down again.
@shekilrose1077
2 жыл бұрын
@@PassportBrosBusinessClass I have 2 LG NanoCell 90 Series 2020 65 inch Class 4K Smart UHD NanoCell TVS w/ AI ThinQ® (64.5'' Diag) i also have 2 Whalen Xavier 3-in-1 TV Stand for TVs up to 70", with 3 Display Options for Flat Screens, Black with Silver Accents i both have them on the floater mount without any problems at all the floater mount is really good on 65 inch TVs.
@ghettogunsmith7989
2 жыл бұрын
Have you seen the side tables for the side?
@PassportBrosBusinessClass
2 жыл бұрын
They make a shelf. I haven’t seen side tables
@ashleyhaley6322
3 жыл бұрын
What kind of screwdriver do I need? A particular size?
@PassportBrosBusinessClass
3 жыл бұрын
A standard Phillips, Flat, Hex screwdriver is enough
@teezyfbaby252
4 жыл бұрын
How do I get the actual tv onto the spine? I have everything put together but still having trouble figuring out how to place the tv
@teezyfbaby252
4 жыл бұрын
Nevermind figured it out! Thanks. I had the plate on backwards lol
@darkinsanity98473
3 жыл бұрын
Do you know what VESA Mounting patters this stand supports?
@onelovejamaica6682
3 жыл бұрын
My middle glass won’t sit on suction
@KevinP32270
3 жыл бұрын
thanks.
@Bingas_
3 жыл бұрын
I can’t get the suction cups into the holes for the shelves...any tips pls??
@PassportBrosBusinessClass
3 жыл бұрын
Push them with thumb force
@trishcook5002
3 жыл бұрын
Forehead sweat on the part that goes in the hole! Bam! They go right in.
@thatssoe1269
3 жыл бұрын
I’m glad that you upload this video, because I’m a woman. & I like to see videos that could help. I’m a visual person lol so thank you so much for this video.
@jennyjones9378
Жыл бұрын
U can adjusted the shelfs
@jonsnow1435
5 ай бұрын
I am planning to move, can we remove those glasses from the rack?
@PassportBrosBusinessClass
5 ай бұрын
Yes
@MagicChuckNorris
3 жыл бұрын
Can Wires go thru the neck of the stand to hide the wires in cable management
@PassportBrosBusinessClass
3 жыл бұрын
yes I showed you
@MagicChuckNorris
3 жыл бұрын
Awesome !!!! Thank you
@mmll25
2 жыл бұрын
got it discounted at 77USD, couldnt say no to that price
@JohnAranita
3 жыл бұрын
The instructions say that if you have difficulty installing the suction cups to use the provided hex wrench. That took a long time. I used the side of a wrench to pressure the suction cups through the metal shelves. That worked super fast!!!
@trishcook5002
3 жыл бұрын
After struggling putting 1/2 of them in, I used my forehead sweat on the suction cup nubbings & they just popped in after that! 😆 Works great!
@Vanessa47912
3 жыл бұрын
I had to use one of the smallest screw drivers in my tool set to help guide the lip of the suction cup in....worked like a charm! I used the 2.5x40mm screw driver.
@169Aquarius
4 жыл бұрын
Mines didn’t come with mount how can buy the mount
@kathyscarlett9865
3 жыл бұрын
How can I buy the Bracket
@earlona
3 жыл бұрын
It holds my 70 inch perfectly
@Quayb24
3 жыл бұрын
How did you get not to lean because mine leans forward and we don’t know what to do.
@BuGu16
2 жыл бұрын
@@Quayb24 me too it’s so annoying it kept leaning forward so I didn’t use it . I’m scare I’ll damage my tv
@Quayb24
2 жыл бұрын
@@BuGu16 mine still leans but it hasn’t fallen or anything so I guess we’re good. I think it’s just the weight of the TV
@AdamAnalytical
2 жыл бұрын
Great video! In inches what is the highet for each of the two interior shelves?
@aaronramen5926
3 жыл бұрын
Wait, so this doesn’t have to be mounted on the wall?
@PassportBrosBusinessClass
3 жыл бұрын
no
@earlona
3 жыл бұрын
Nope..3 in 1
@earlona
3 жыл бұрын
Mine is mounted on post in middle and it swivels..sturdy all round..very pleased
@Jesus-cx2tq
2 жыл бұрын
Can this hold a 65inch qled Samsung tv?
@PassportBrosBusinessClass
2 жыл бұрын
Yes
@ms.rolltide256
2 жыл бұрын
I bought this last nite for my new 65 inch I bought last nite to watch Alabama play and Bama beat Fury 🙄 saying all of this to say I put it together but had to watch my tv on my floor because the brackets wouldn’t mount to my tv the Vizio 65 inch ugh
@nicholegallo1090
Жыл бұрын
Just got this stand for my 65 inch, going to do a float mount
Пікірлер: 248