I did this upgrade to my Riley 300 a few years ago, best decision ever. Less deflection, better registration, and easier setup are a few of the benefits. If you're thinking about it, do it.
@Ryonet
2 жыл бұрын
Hey @Lee Stuart! Glad they're working awesome for you! Keep up the good work.
@ShawnxEdge
2 жыл бұрын
Vastex makes a side clamp that can clamp into your existing rear clamp making the conversion extremely simple! They also have a few options for width and length.
@Ryonet
2 жыл бұрын
Good morning @Shawn Edge! I believe that i have seen those, they also offer a numbering system that is the same... meaning, it clamps into the back clamp. Have you used the side clamps? My only thought is this. Not only do i have the existing weight of the rear clamp, but i'm adding on the weight of the side clamps as well. I would imagine the print head becoming pretty heavy at that point. Thoughts?
@ShawnxEdge
2 жыл бұрын
@@Ryonet I installed them on my Antec Legend press, I had to add another set of springs.
@burakerol.
Жыл бұрын
Vastex is very bad printing press
@ShawnxEdge
Жыл бұрын
@@burakerol. I’m not a fan of their presses but the side clamps are decent enough.
@theblankworkshop
2 жыл бұрын
only problem I am having with these side clamps is when I'm using big screens and doing big designs over 17-18 inches height, I often have to pull my platten out further than it allows in order to print my design.
@Ryonet
2 жыл бұрын
Hi @The Blank Workshop. Question. What press are you working on and what size of platten?
@lisaakalolli6611
2 жыл бұрын
I really want to learn to screen print..but I don't wanna spend a fortune so same question.. can these be used on the Riley 250
@Ryonet
2 жыл бұрын
Hi @Lisa Carter, Happy Monday! The side clamps are not compatible with the Riley 250 for a couple different reasons. However, if you are just diving in, side clamps are not a necessity at all. A back clamp will serve the purpose just fine. Hope that helps. Let us know if you have more questions. THANKS!
@marcojordy1495
2 жыл бұрын
First liker Here!!!!
@hustlerstudiomfg
2 жыл бұрын
I recently bought the riley 250 6x4. Is it possible to buy these for my press?
@bigmamabren3360
2 жыл бұрын
Their website is only showing them for Riley 300 and 350. I also have a 250 and wish this would work for me.
@hustlerstudiomfg
2 жыл бұрын
@@bigmamabren3360 maybe in the future they’ll make one for the 250. I mean it’s extra bucks for them right 😉
@bigmamabren3360
2 жыл бұрын
@@hustlerstudiomfg I think its the space between the bottom corners of the frames while they are on press. The space might not accommodate the extra width of the side clamps, but I hope they figure it out.
@Ryonet
2 жыл бұрын
Good morning @Meester Tris & @Brenda Owens! Brenda is correct. There is some spacing issues w/ trying to take side clamps to the 250. The main reason is weight though. The 250 head would struggle to hold side clamps up. The connecting plate would also have to be redesigned. Not the answer you were hoping for, but i hope it helps. Having used both, I would say that both the 250 back clamp and the side clamp have a ton of value. The 250 is light and maneuverable. The side clamps are super sturdy and stable, but do add weight...
@hustlerstudiomfg
2 жыл бұрын
@@Ryonet you guys are always so awesome. Great customer service!
Пікірлер: 20